Advertisement

Pressure Transducers Provide a Full Scale Accuracy of 0.25 Percent

September 26, 2007 5:05 am | Product Releases | Comments

Gems Sensors & Controls introduced the 3100 Series Pressure Transducers which provide a full scale accuracy of 0.25 percent. Long term drift is limited to 0.1 percent over the full scale per year. This performance and stability is achieved using sputtered thin film sensing technology, and has less than 1" in diameter, weighing 32g

LISTED UNDER: Sensors & Actuators

Single-Chip Automotive CMOS Image Sensors

September 24, 2007 12:40 pm | Product Releases | Comments

OmniVision Technologies, Inc. unveils its near infrared (NIR) capable single-chip automotive CMOS image sensors which can operate in dual mode, allowing them to function equally well in both day and night vision applications. The NIR capability improves functionality for automotive safety and security applications while allowing OEMs and automotive manufacturers to simplify system designs. This dual mode night vision capability is useful in driver assistance and safety applications

LISTED UNDER: Sensors & Actuators

Ambient Light Sensor Works in Direct Sunlight

September 24, 2007 12:37 pm | Product Releases | Comments

Avago Technologies announces its model APDS-9007 ambient light sensor with a logarithmic output response over a range of lighting conditions that covers a range of brightness from 3 lux to 70 K lux, making it suitable for mobile applications as well as outdoor lighting and solar panels which may be operated under direct sunlight. Designed to closely follow the human-eye spectral response curve, the sensor reduces power consumption and saves battery life in portable and mobile devices

LISTED UNDER: Sensors & Actuators
Advertisement

Hazardous Area Vibration Sensors

September 24, 2007 12:34 pm | Product Releases | Comments

Wilcoxon Research introduces a range of sensors rated for operation in hazardous areas and in machinery health monitoring applications. With the Intrinsic Safety (IS) certification, they can be used where flammable or explosive materials are present without causing electrical sparks or “hot spots” strong enough to cause ignition of gases or dusts in the air. The sensors meet the standards for IS and explosion-proof certification that are established by the NFPA in the U.S., the CSA in Canada and CENELEC in the European Union.

LISTED UNDER: Sensors & Actuators

Embeddable Presence Sensor

September 24, 2007 12:26 pm | Product Releases | Comments

Banner Engineering Corp. introduces its M-GAGE wireless sensor node for vehicle sensing using the SureCross Wireless Network. This specially optimized sensor is encapsulated in a rugged, IP67 SureCross Node enclosure and accompanied by a FlexPower battery that supplies power for both sensing and wireless connectivity for up to 10 years. The sensor offers greater durability and reliability than inductive loops.

LISTED UNDER: Sensors & Actuators

Miniature Precision Mass Airflow Sensor

September 24, 2007 12:21 pm | Product Releases | Comments

Omron Electronic Components LLC announces its D6F-03 uni-directional MEMS mass flow sensor which uses a thermopile element that converts thermal energy into electrical energy. It is capable of measuring mass airflow up to 3 LPM with a ±5 percent full-scale repeatable accuracy. These sensors exhibit stable output performance across the entire scale. Through packaging that uses miniaturization techniques, these devices measure 16.8 mm × 8 mm × 36.6 mm

LISTED UNDER: Sensors & Actuators

Programmable Encoders for Miniaturized Applications

September 24, 2007 12:16 pm | Product Releases | Comments

Sick Stegmann, Inc. introduces its user-programmable DiCoder CKS 36 programmable motor feedback system which provides resolution up to 2,048 pulses per revolution and commutation signals of up to 32 pole pairs. It provides rugged operation and precise performance in applications with operating temperatures ranging from -20°C to 110°C. These encoders feature Mini-Disc (MiDi) technology, a very small code disc that includes a track radius of 2 mm

LISTED UNDER: Sensors & Actuators

Analog Accelerometer for Portable Applications

September 24, 2007 11:59 am | Stmicroelectronics | Product Releases | Comments

STMicroelectronics announces its LIS244AL ultra-compact 'low-g' linear accelerometer. Its ultra-compact square footprint and low power consumption makes the motion-sensing device well suited for battery-powered portable applications such as mobile phones, portable multimedia players or remote controls. The device incorporates in a single package a robust, dual-axis MEMS sensor and a CMOS interface chip that provides two simultaneous, real-time analog outputs

LISTED UNDER: Sensors & Actuators
Advertisement

Light Weight USB-Based Sensors

September 24, 2007 11:55 am | Keysight Technologies | Product Releases | Comments

Agilent Technologies, Inc. announces its U2000 series of USB-based power sensors which are lighter weight than typical power meters. Since the sensors operate without power meters or extra hardware modules, they save bench space, and make field work simpler. These sensors can be used with a variety of proprietary signal sources, spectrum analyzers and network analyzers, extending each instrument's capabilities to perform accurate average-power measurements.

LISTED UNDER: Sensors & Actuators

Low-Pressure Transmitters

September 24, 2007 11:50 am | Product Releases | Comments

American Sensor Technologies, Inc. announces its AST44LP and AST43LP low-pressure, hazardous area-approved pressure transmitters. These media-isolated, stainless steel units can perform in a variety of industrial applications. Both low-pressure transmitters are constructed with 316L SS wetted materials for complete compatibility with a range of liquids and gases. The AST44LP carries an UL/cUL 913 (CSA 157) approval

LISTED UNDER: Sensors & Actuators

Dual-Axis Absolute Inclinometer

September 24, 2007 11:38 am | Product Releases | Comments

US Digital introduces its X3Q dual-axis absolute inclinometer which utilizes MEMS technology to sense tilt angles over the entire 360° range. The device is flexible with three different mounting orientations in any resolution between 1 to 9,000 CPR, and it offers a selectable damping value to suit users’ needs. Absolute Quadrature provides absolute data using standard quadrature signals. Typical applications include

LISTED UNDER: Sensors & Actuators

M8/M12 Connector Systems for Sensors

September 24, 2007 11:35 am | Product Releases | Comments

Tyco Electronics announces its M8/M12 connector system which provides reliable connection to sensors and related products in the industrial machinery and factory automation markets. An established connection standard, M8/M12 connectors also find application outside of these industries where a compact connection system with environmental protection is required. Single end terminated cable assemblies use an over-molded construction with

LISTED UNDER: Sensors & Actuators

Pressure Transducers and Transmitters for Industrial Environments

September 24, 2007 11:30 am | Product Releases | Comments

PCB Piezotronics announces its series 1500 transducers and transmitters which offer a complete selection for pressure monitoring in general purpose and hazardous industrial environments. General purpose units feature a rugged, all-welded stainless steel construction. The design includes elimination of mechanical fasteners, washers, O-rings and fluid fills that enhance reliability and long-term repeatability of the units, making them suitable for a variety of laboratory, factory, field

LISTED UNDER: Sensors & Actuators

Free Field Microphone for Sound Pressure Mapping

September 24, 2007 11:11 am | Product Releases | Comments

PCB Piezotronics introduces its Model 130D22 combined ICP free field response pre-polarized array microphone and preamplifier. The microphone measures sound pressure levels and frequencies in the audible range, and it can be used simultaneously with ICP accelerometers to simplify test setups. It also incorporates an SMB connector, it provides seamless transition for many data acquisition systems and software set-ups

LISTED UNDER: Sensors & Actuators

Thin Film RTD Elements for OEM Applications

September 24, 2007 11:07 am | Product Releases | Comments

Omega Engineering, Inc. introduces its Omegafilm F2020 series of platinum thin film elements. They are equal in accuracy to many wire wound elements, but with a faster response. The temperature range is -70°C to 500°C, and they are available in 100?, 500? and 1,000? configurations in Class-A, Class-B and 1/3 DIN accuracies. Measuring 2.0 mm × 2.0 mm × 0.8 mm, they are suitable for use in tight places, and their flat profile allows for easy surface mounting.

LISTED UNDER: Sensors & Actuators

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading