Advertisement

IEPE Accelerometer Offers 10 mV/g Sensitivity

September 25, 2008 5:34 am | Product Releases | Comments

Weighing in at 0.2 grams, Dytran Instruments’ 3224A1 IEPE accelerometer presents a sensitivity of 10 mV/g. The “teardrop”-designed component operates at temperatures up to 300°F with integrated electronics, an adhesive mount, and a planar shear ceramic design. The accelerometer is suitable for environmental stress screening, PC board vibration

LISTED UNDER: Sensors & Actuators

Wireless Sensors Offer Web-based Monitoring

September 22, 2008 9:24 am | Product Releases | Comments

Transmitting over 1,000 meters outdoors without obstructions, Newport Electronics’ wiSeries wireless sensors deliver Web-based monitoring of temperature, humidity and barometric pressure over an Ethernet network. The devices include a coordinator/receiver that connecting directly into an Ethernet network and the Internet, and serves active Web pages to display and chart the data. The sensors use an IEEE 802.15.4-compliant transmitter operating at

LISTED UNDER: Sensors & Actuators

Sensors Include Capped Elbow Conduit

September 18, 2008 10:45 am | Product Releases | Comments

Meeting ATEX and CSA requirements for use in hazardous areas, IMI Sensors’ EX64xB7x Series 4 mA to 20 mA output sensors use a 1” NPT 90° capped elbow conduit. The devices operate from standard 24 V loop power for compatibility with existing PLCs, SCADA, DCS and Plant Information (PI) systems. The sensors come with acceleration or velocity

LISTED UNDER: Sensors & Actuators
Advertisement

Analysis System Measures Roller Profiles

September 15, 2008 12:37 pm | Product Releases | Comments

Calculating and recording nip width at multiple points, Sensor Products’ Sigma-Nip electronic nip analysis system measures roller profiles and alignment condition across the rollers’ face length in real-time. The device consists of a series of thin-film resistive ink pressure transducers on a carrier sheet that is loaded in between the rollers with Windows-based software assimilating the readings into graphical images. The sensor elements that are

LISTED UNDER: Sensors & Actuators

Air Flow Sensors Utilize Digital Display

September 3, 2008 9:49 am | Product Releases | Comments

Verifying flow rate, direction and output condition, Panasonic Electric Works’ FM-200 Series SUNX air flow sensors integrates a two-color dual digital display to show this data. The devices offer bi-directional flow detection of

LISTED UNDER: Sensors & Actuators

Encoder/Decoder Shapes RS-232 Data Signals

August 27, 2008 9:12 am | Product Releases | Comments

Supporting data ranges from 1.20 kb/s to 115.20 kb/s, Vishay Intertechnology’s TOIM5232 encoder/decoder presents proper pulse shaping of RS-232 data signals for serial infrared (SIR) IrDA transceivers. The device shortens RS-232 output signals to IrDA-compatible electrical pulses to drive an infrared transmitter in transmit mode, and

LISTED UNDER: Sensors & Actuators

Rotary Actuators Offer 15 Arc-Seconds Accuracy

August 27, 2008 8:01 am | Product Releases | Comments

Integrating a cross-roller bearing structure, Oriental Motor’s DG 200 Series hollow rotary actuators shows a repetitive position accuracy of 15 arc-seconds and a total backlash of 2 arc-minutes. With a frame size of 7.87” (200 mm) and an internal hollow diameter of 3.94” (100 mm), the RoHS-compliant components develop

LISTED UNDER: Sensors & Actuators

Thermocouple and RTD Transmitters Offer Weather Resistance

August 22, 2008 5:04 am | Product Releases | Comments

Coming in a NEMA 4X enclosure, Omega Engineering’s UWTC-2-NEMA & UWRTD-2-NEMA wireless thermocouple and RTD transmitters exhibit weather resistance in industrial applications. The CE-compliant devices endure in weather conditions including falling dirt, rain, sleet, snow, windblown dust, splashing water and hose-directed water. Each thermocouple model can be programmed to work as a type J, K, T, E, R

LISTED UNDER: Sensors & Actuators
Advertisement

Accelerometers Use a Motion Detection Device

August 21, 2008 7:27 am | Product Releases | Comments

Targeting the automotive and industrial markets, Kionix's KXD94 Series of accelerometers include a tri-axis, mid-g motion detection device. The components offer an output range from ±5 g to ±13 g, a supply voltage range from 2.75 V to 5.25 V, an integrated four-channel multiplexer and an internal 1-KHz low pass filter. The RoHS

LISTED UNDER: Sensors & Actuators

Pressure Transducer Offers Flush Diaphragm

August 20, 2008 5:16 am | Product Releases | Comments

Machining from a single piece of steel, Stellar Technology's Model FT260 pressure transducer utilizes a flush diaphragm to reduce dead volume to the fixturing to resist the accumulation of residue down to zero. The enviromentally-sealed device performs over a range of -100°F to 300°F (compensated: -65°F to 250°F) in pressure ranges from 0 to 2,000 psi through 0 to 10,000 psig/a. The 3.5-oz transducer delivers a static accuracy of ±0.25% (BFSL),a standard output signal of 3 mV/V at 70°F and burst pressure of at least 3X FSO range. The

LISTED UNDER: Sensors & Actuators

Isolator Bases Protect 1,500 V

August 15, 2008 8:02 am | Product Releases | Comments

Targeting accelerometers, Wilcoxon Research's SF21, SF22, SF23 and SF24 isolater bases protect a vibration sensor from up to 1,500 V for as long as one minute and withstand temperatures up to 120ºC. The SF21 and SF22 are both 1" (25 mm) across the flats with a 0.820" (20-mm) mounting pad that can accommodate up to

LISTED UNDER: Sensors & Actuators

Vibration Switches Offers USB Programmability

August 14, 2008 5:18 am | Product Releases | Comments

Offering designs for 24/7 continuous protection, IMI Sensors’ Series 686B USB-programmable smart vibration switches have a remote reset capability and USB-programmable delays to avoid false trips. The hermetically-sealed devices require two wires and can replace legacy switches for additional cable runs. The switches perform in

LISTED UNDER: Sensors & Actuators

Transducer Contains No O-rings

August 1, 2008 8:21 am | Product Releases | Comments

Performing with Krystal Bond technology, American Sensor Technologies’ one-piece stainless steel AST20HA pressure transducer has no internal o-rings and exhibits 100-V/m EMI/RFI protection from electrical noise. The CE-approved device offers pressure ranges from 0 to 10,000 psi in compound ranges up to 2500 psi while

LISTED UNDER: Sensors & Actuators

Sensor ICs Offer Low Linearity

July 23, 2008 6:55 am | Product Releases | Comments

Exhibiting a typical nonlinearity of ±0.4% from -20°C to 80°C, Seiko Instruments’ S-58LM20A Series of temperature sensor ICs yield a typical linear output voltage of -11.77 mV/°C. The Pb-free devices offer ±2.50°C accuracy against temperature in the temperature range from -55°C to 130°C and consist of a temperature

LISTED UNDER: Sensors & Actuators

Pocket-Sized USB Datalogger Tracks Temperatures

July 22, 2008 5:12 am | Product Releases | Comments

Providing both a USB output for data readout and an onboard numeric LCD for real-time monitoring, the OM-Microlite portable data logger from Omega Engineering records temperature over time for applications such as the warehousing and transport of sensitive materials or employee exposure management in industrial environments.

LISTED UNDER: Sensors & Actuators | Test & Measurement

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading