Advertisement
RF & Microwave/Communications

High-performance GPS front-end modules target smartphones

September 12, 2014 11:03 am | Product Releases | Comments

TDK Corporation (Tokyo, Japan) announced two EPCOS front-end modules for satellite navigation systems that enable the coexistence of cellular, WLAN, Bluetooth and satellite navigation services on the same antenna.

LISTED UNDER: RF & Microwave/Communications | Filters | Surface Accoustic Wave Devices

Smart home radio chip uses RF instead of infrared

September 11, 2014 2:59 pm | Product Releases | Comments

GreenPeak Technologies (Utrecht, The Netherlands) launched the new GP565 Smart Home radio chip for remote controls, that supports voice control, motion sensing and the new ZRC 2.0 protocol.  Next generation remotes use RF instead....

LISTED UNDER: RF & Microwave/Communications

VCO operates at 1680 MHz

August 28, 2014 3:03 pm | Product Releases | Comments

Crystek’s (Fort Myers, FL) CVCO55CC-1680-1680 VCO (Voltage Controlled Oscillator) operates at 1680 MHz with a control voltage range of 0.5 V to 4.5 V. This VCO features a typical phase noise of -117 dBc/Hz at 10 kHz offset and has desirable linearity....

LISTED UNDER: Digital | Oscillators/Dividers | RF & Microwave/Communications
Advertisement

RFID multiple switch monitor tag is battery free

August 28, 2014 10:10 am | Product Releases | Comments

The X32 from Farsens S.L. (San Sebastián, Spain) is a battery free RFID switch monitor tag capable of transmitting a unique identifier and the status of up to 32 switches to a commercial EPC C1G2 reader without the need of a battery on the sensor tag.

LISTED UNDER: RF & Microwave/Communications | Antennas | RF

Wireless charging and NFC reference design is automotive ready

August 27, 2014 10:12 am | Melexis | Product Releases | Comments

Combining the automotive grade NFC (Near Field Communication) transceiver of Melexis with Freescale Semiconductor’s wireless charging technology enables a ready to use reference design solution that is positioned to free drivers from the dreaded low battery warning.

LISTED UNDER: Kits | Circuit Design Aids | Circuits

Crystal comes in ultra-miniature size

August 18, 2014 11:56 am | Product Releases | Comments

CTS Corporation announced the smallest member of its quartz crystal products, Model 402. The product is housed in a 2.0-mm x 1.6-mm seam sealed ceramic four-pad surface mount package – providing …

LISTED UNDER: Crystals | Piezo Quartz

Direct conversion I/Q modulator has better than 50dB sideband & carrier suppression

August 11, 2014 1:56 pm | Linear Technology Corporation | Product Releases | Comments

A new low power I/Q modulator from Linear Technology (Milpitas, CA) enables battery-powered transmitters operating in the 30MHz to 1.3GHz frequency bands, breaking new ground in power consumption, sideband suppression, carrier leakage and dynamic range performance....

LISTED UNDER: RF & Microwave/Communications

VCO includes control voltage range of 0.5V~4.5V

August 11, 2014 9:21 am | Crystek Crystal | Product Releases | Comments

Crystek's (Fort Myers, FL) CVCO55FL-0200-0239 VCO (Voltage Controlled Oscillator) operates from 200 MHz to 239 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -123 dBc/Hz @ 10KHz offset and has excellent linearity....

LISTED UNDER: RF & Microwave/Communications | Oscillators | Voltage Controlled
Advertisement

Attenuators feature operating frequencies up to 18 GHz

August 8, 2014 9:11 am | Product Releases | Comments

Fairview Microwave (Allen, TX) announces the release of their new family of 25, 50 and 100 Watt attenuators with operating frequencies up to 18 GHz depending on the configuration. There is a total of 236 new part numbers in this attenuator release from Fairview Microwave....

LISTED UNDER: RF & Microwave/Communications

Configurable frequency synthesizers offer phase noise performance as low as -92 dBc/Hz at 100 kHz offset

August 4, 2014 1:31 pm | Api Technologies | Product Releases | Comments

API Technologies Corp. (Orlando, FL) announced the launch of configurable frequency synthesizers (Models LCFS-X), the newest addition to the Company’s line of standard RF / microwave products. Offering superior phase noise performance as low as -92 dBc/Hz at 100 kHz offset ...

LISTED UNDER: RF & Microwave/Communications

Two-channel DDS function generator features maximum frequency of 50MHz

July 31, 2014 3:14 pm | Saelig Company, Inc. | Product Releases | Comments

Saelig Company, Inc. (Fairport, NY) has a launched two-channel version of their TG5011 function/arbitrary/pulse generators. The new TG5012A features a maximum frequency of 50MHz. Both channels provide the full performance and specification, along with entirely independent operation when required....

LISTED UNDER: RF & Microwave/Communications | Oscillators | Square Wave

RF field detector is battery free

July 23, 2014 9:58 am | Product Releases | Comments

The PHOTON from Farsens S.L. (San Sebastián, Spain) is a UHF RF field detector passive tag equipped with an LED. Whenever this tag is close to an RF field source, it will harvest the energy from the RF field and drive an LED. The stronger the RF field in a

LISTED UNDER: RF & Microwave/Communications

DC – 50 GHz LNA offers wideband performance

July 18, 2014 1:03 pm | Product Releases | Comments

Custom MMIC (Westford, MA) announced the addition of the CMD206, a DC-50 GHz distributed low noise amplifier in die form, to its product line. Applications for the CMD206 include…

LISTED UNDER: Amplifiers | RF & Microwave/Communications

Wireless power transfer demonstration kit delivers 35 W and Operates at 6.78 MHz

July 15, 2014 12:00 pm | Efficient Power Conversion | Product Releases | Comments

Efficient Power Conversion Corporation (El Segundo, CA) announced the immediate availability of a complete demonstration wireless power transfer kit. The system is capable of delivering up to 35 W into a DC load while operating at 6.78 MHz (the lowest ISM band).

LISTED UNDER: Kits | Development | Power Sources & Signal Conditioning Devices

VCO operates from 1000 MHz to 2000 MHz

July 11, 2014 4:44 pm | Crystek Crystal | Product Releases | Comments

The CVCO55BE-1000-2000 VCO (Voltage Controlled Oscillator) from Crystek (Fort Myers, FL) operates from 1000 MHz to 2000 MHz with a control voltage range of 1.0V~20V. This VCO features a typical phase noise of -95 dBc/Hz @ 10KHz offset and has excellent linearity....

LISTED UNDER: RF & Microwave/Communications | Oscillators | Voltage Controlled

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading