Advertisement
RF & Microwave/Communications

Narrow band transmitter offers frequencies between 425MHz and 470MHz

October 21, 2014 1:07 pm | Product Releases | Comments

Radiometrix Ltd (England) has launched a new range of highly flexible, frequency programmable, RF power adjustable radios. The new NTX2B Transmitter offers industry-leading true Narrow Band FM performance and is available on user/factory programmable ...

LISTED UNDER: RF & Microwave/Communications | Transmitters

RF chokes offers components for rated currents up to 4450 mA

October 20, 2014 9:15 am | TDK Corporation of America | Product Releases | Comments

TDK Corporation (Iselin, NJ) announces new EPCOS leaded RF chokes with high current capability.The series with designation LBC+ offers components for rated currents up to 4450 mA and saturation currents up to 7700 mA.This corresponds....

LISTED UNDER: RF & Microwave/Communications

Oscillator offers control voltage range of 0.1 V~16 V

October 17, 2014 2:10 pm | Crystek Crystal | Product Releases | Comments

Crystek's CVCO55CC-4124-4238 VCO (Voltage Controlled Oscillator) operates from 4124 MHz to 4238 MHz with a control voltage range of 0.1 V~16 V. This VCO features a typical phase noise of -106 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +5 dBm.

LISTED UNDER: Oscillators | Voltage Controlled
Advertisement

Bluetooth modules transmit audio data up to 650 ft.

September 25, 2014 10:24 am | Radicom Research, Inc. | Product Releases | Comments

Radicom Research (San Jose, CA) announced the release of its RB540 family Bluetooth modules that support Bluetooth BLE V3.0 and Classic standards.  The RB540 series features a Class 1 Bluetooth data with simultaneous audio module for ...

LISTED UNDER: Boards & Modules | RF & Microwave/Communications | RF

Next-generation WiFi modules support the latest 802.11b/g/n wireless standards for the IoT

September 23, 2014 11:02 am | Product Releases | Comments

Connect One (Kfar Saba, Israel) has launched its next-generation (G2) WiFi modules to support the latest 802.11b/g/n wireless standards for the Internet of Things (IoT) market. The G2 modules offer desirable system performance for IoT connectivity with ...

LISTED UNDER: Boards & Modules | Boards | RF & Microwave/Communications

Normally open coaxial switch provides 10 outputs

September 23, 2014 10:21 am | Product Releases | Comments

Teledyne Coax Switches (Cumbernauld, UK) introduced its new Series CCT-38 Coax Switch. The CCT-38 is a broadband multi-throw, electromechanical coaxial switch designed to switch a microwave signal from …

LISTED UNDER: Electromechanical/Mechanical Devices | Switches | Coaxial

6 GHz to 16 GHz driver amplifier delivers 21 dB of gain

September 19, 2014 11:17 am | Product Releases | Comments

Custom MMIC (Westford, MA) announced the addition of the CMD158C4, a new 6 to 16 GHz driver amplifier, to their growing standard product line. The CMD158C4 delivers 21 dB of gain across its bandwidth, while providing ...

LISTED UNDER: Microwave | Power | RF

High-performance GPS front-end modules target smartphones

September 12, 2014 11:03 am | Product Releases | Comments

TDK Corporation (Tokyo, Japan) announced two EPCOS front-end modules for satellite navigation systems that enable the coexistence of cellular, WLAN, Bluetooth and satellite navigation services on the same antenna.

LISTED UNDER: RF & Microwave/Communications | Filters | Surface Accoustic Wave Devices
Advertisement

Smart home radio chip uses RF instead of infrared

September 11, 2014 2:59 pm | Product Releases | Comments

GreenPeak Technologies (Utrecht, The Netherlands) launched the new GP565 Smart Home radio chip for remote controls, that supports voice control, motion sensing and the new ZRC 2.0 protocol.  Next generation remotes use RF instead....

LISTED UNDER: RF & Microwave/Communications

VCO operates at 1680 MHz

August 28, 2014 3:03 pm | Product Releases | Comments

Crystek’s (Fort Myers, FL) CVCO55CC-1680-1680 VCO (Voltage Controlled Oscillator) operates at 1680 MHz with a control voltage range of 0.5 V to 4.5 V. This VCO features a typical phase noise of -117 dBc/Hz at 10 kHz offset and has desirable linearity....

LISTED UNDER: Digital | Oscillators/Dividers | RF & Microwave/Communications

RFID multiple switch monitor tag is battery free

August 28, 2014 10:10 am | Product Releases | Comments

The X32 from Farsens S.L. (San Sebastián, Spain) is a battery free RFID switch monitor tag capable of transmitting a unique identifier and the status of up to 32 switches to a commercial EPC C1G2 reader without the need of a battery on the sensor tag.

LISTED UNDER: RF & Microwave/Communications | Antennas | RF

Wireless charging and NFC reference design is automotive ready

August 27, 2014 10:12 am | Melexis | Product Releases | Comments

Combining the automotive grade NFC (Near Field Communication) transceiver of Melexis with Freescale Semiconductor’s wireless charging technology enables a ready to use reference design solution that is positioned to free drivers from the dreaded low battery warning.

LISTED UNDER: Kits | Circuit Design Aids | Circuits

Crystal comes in ultra-miniature size

August 18, 2014 11:56 am | Product Releases | Comments

CTS Corporation announced the smallest member of its quartz crystal products, Model 402. The product is housed in a 2.0-mm x 1.6-mm seam sealed ceramic four-pad surface mount package – providing …

LISTED UNDER: Crystals | Piezo Quartz

Direct conversion I/Q modulator has better than 50dB sideband & carrier suppression

August 11, 2014 1:56 pm | Linear Technology Corporation | Product Releases | Comments

A new low power I/Q modulator from Linear Technology (Milpitas, CA) enables battery-powered transmitters operating in the 30MHz to 1.3GHz frequency bands, breaking new ground in power consumption, sideband suppression, carrier leakage and dynamic range performance....

LISTED UNDER: RF & Microwave/Communications

VCO includes control voltage range of 0.5V~4.5V

August 11, 2014 9:21 am | Crystek Crystal | Product Releases | Comments

Crystek's (Fort Myers, FL) CVCO55FL-0200-0239 VCO (Voltage Controlled Oscillator) operates from 200 MHz to 239 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -123 dBc/Hz @ 10KHz offset and has excellent linearity....

LISTED UNDER: RF & Microwave/Communications | Oscillators | Voltage Controlled

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading