Advertisement

Translucent flex antenna enables innovative industrial designs

June 13, 2013 9:53 am | Pulse Electronics | Product Releases | Comments

Pulse Electronics Corporation introduces the mLUX Translucent Flex Antenna, which enables more innovative, creative, and impressive design effects for mobile devices. The mLUX is an invisible antenna concept. It allows light and color to shine through the translucent device cover, offering multiple options for industrial design.

LISTED UNDER: Handheld

Ethernet media converter transmits data up to 100Km

June 10, 2013 12:56 pm | B & B Electronics | Product Releases | Comments

B&B Electronics Manufacturing Company released its iMcV-Giga FiberLinX-III gigabit intelligent Ethernet media converter. This highly anticipated third generation of the company’s successful FiberLinX family is a 10/100/1000Mbps copper to 1000Mbps fiber device, converting existing copper wiring-based networks to fiber optics.

LISTED UNDER: Transmitters

Source module features -134 dBc/Hz phase noise at 10 KHz offset

June 10, 2013 10:08 am | Crystek Crystal | Product Releases | Comments

Crystek Microwave announces the release of a 2 GHZ RF Source, the CRFS75-2000. Crystek designed the module using proprietary circuitry and SAW (surface acoustic wave) resonator technology to provide ultra-low jitter/phase noise performance with true SineWave output.

LISTED UNDER: Resonators
Advertisement

Reference design delivers ultra-wideband Doherty amplifiers

May 21, 2013 3:29 pm | Nxp Semiconductors | Product Releases | Comments

NXP Semiconductors N.V. announced the availability of its ultra-wideband Doherty reference design using the BLF884P and BLF884PS – asserted to be the industry’s first wideband Doherty power amplifiers capable of broadband operation (470 MHz to 806 MHz). The new 70-W DVB-T LDMOS designs

LISTED UNDER: Microwave

Gigabit Ethernet Module

May 2, 2013 6:17 pm | PCA Electronics, Inc. | Products

Gigabit Ethernet interface module for single-port IEEE 802.3ab applications. Operating temperature 0 - 70C. 1500 Vrms isolation.

LISTED UNDER: Band Pass

Gigabit Ethernet Module

May 2, 2013 5:10 pm | PCA Electronics, Inc. | Products

1000BaseT interface module takes little board space. Smallest single-channel interface module available. Connected between the Ethernet cable and interface chip, module eliminates noise from the signal. RoHS: Lead-Free. PCA P/N: EPG4033JE-LF

LISTED UNDER: Communication Systems | Band Pass

10/100Base-TX Filter for NIC/Switch Applications

April 24, 2013 5:34 pm | PCA Electronics, Inc. | Products

Ethernet Filter for NIC/Hub/Switch applications. Small package for mounting behind RJ-45 connector. Transfer-molded.

LISTED UNDER: Band Pass

Oscillator boasts stability 1,000 times more accurate than typical OCXO

April 24, 2013 5:03 pm | IQD Frequency Products, Inc. | Product Releases | Comments

IQD’s latest high performance oscillator, the IQRB-1, offers a stability around a 1,000 times more accurate than a typical Oven Controlled Crystal Oscillator (OCXO). This means it can be used as a free run frequency source in applications such as LTE (Long Term Evolution) systems that require exceptional timing accuracy.

LISTED UNDER: Crystal
Advertisement

VCXO delivers small size combined with low jitter

April 24, 2013 1:55 pm | IQD Frequency Products, Inc. | Product Releases | Comments

IQD’s new IQXV-40 series Voltage Controlled Crystal Oscillator (VCXO) launching at Design West 2013 satisfies market demand for smaller package styles and low jitter. Measuring just 3.2 x 2.5mm and housed in a hermetically sealed package with a grounded metal lid for low EMI radiation...

LISTED UNDER: Crystal | Voltage Controlled

VCO operates from 2700 to 5400 MHz with a tuning voltage range of 0-24 Vdc

April 19, 2013 4:06 pm | Product Releases | Comments

The new V600ME31-LF operates from 2700 to 5400 MHz with a tuning voltage range of 0-24 Vdc. This octave tuning VCO features a typical phase noise of -107 dBc/Hz @ 100 kHz offset and an average tuning sensitivity of 140 MHz/V.

LISTED UNDER: Voltage Controlled

NFC antennas ideal for integration into point-of-sale terminals

April 17, 2013 9:40 am | Pulse Electronics | Product Releases | Comments

Pulse Electronics Corporation announces a new catalog selection of ferrite-loaded, stamp, and wire-on-carrier near field communication (NFC) antennas. These products are ideal for integration into point-of-sale terminals, security and access control panels, transportation payment devices, and consumer electronics.

LISTED UNDER: Microwave

VCO operates at 6400 MHz with a tuning voltage range of 0.3 Vdc to 4.7 Vdc

April 15, 2013 4:30 pm | Product Releases | Comments

Crystek’s new CVCO55CXT-6400-6400 Coaxial Resonator Oscillator (CRO) is a coaxial-based VCO with an internal proprietary frequency doubler. The CVCO55CXT family’s frequency doubling, 2X fundamental technology reaches new performance levels of lower phase noise and much lower harmonics over the competition, while achieving lower current consumption in the process.

LISTED UNDER: Voltage Controlled

Cellular router includes 802.11b/g/n Wi-Fi connectivity technology

April 10, 2013 2:45 pm | B & B Electronics | Product Releases | Comments

B&B Electronics announces that it has added 802.11b/g/n Wi-Fi connectivity technology to its rugged SPECTRE 3G cellular router. Called the SPECTRE3G-W, this new wireless cellular router is a single box solution that provides local machine-to-machine (M2M) network connectivity via its built-in Wi-Fi Hotspot, Ethernet 10/100 and I/O ports....

LISTED UNDER: RF

Coaxial resonator oscillator operates from 5685 MHz to 5780 MHz

March 28, 2013 11:41 am | Crystek Crystal | Product Releases | Comments

Crystek’s CVCO55CXT-5685-5780 Coaxial Resonator Oscillator (CRO) is a coaxial-based VCO with an internal proprietary frequency doubler. The family’s frequency doubling, 2X fundamental technology is asserted to reach new performance levels of

LISTED UNDER: Voltage Controlled

MEMS oscillator presents small size, power savings for mobile applications

March 27, 2013 3:31 pm | SiTime Corp. | Product Releases | Comments

SiTime introduced the SiT15xx family of 32 kHz MEMS oscillators that are positioned to replace legacy quartz crystal resonators. This family is targeted at mobile applications such as smart phones and tablets, which require small size and low power. The family rivals quartz-based devices and

LISTED UNDER: Clock | RF

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading