Advertisement

RF switch attenuators provide up to 6 GHz

January 30, 2014 1:24 pm | Product Releases | Comments

Fairview Microwave (Allen, TX) has released a new line of compact hot-switchable variable attenuators. RF attenuators are used to reduce the amplitude of an electronic signature in many common electronic scenarios including lab testing equipment, distributed antenna systems (DAS) and power and signal monitoring systems.

LISTED UNDER: Handheld

Oscillators designed for telecom clocking applications

January 23, 2014 10:13 am | Precision Devices, Inc. | Product Releases | Comments

Precision Devices, a member of the Avrio Technology Group, LLC., has announced the introduction of the LV5 and PE5 series of LVDS and PECL (respectively) oscillators. These are ideally suited for communication systems where low jitter and small size are required by chipset suppliers and system architecture.

LISTED UNDER: Clock

Digital phase shifter has a minimum phase range of 360 degrees

January 17, 2014 11:30 am | Rfmw Ltd | Product Releases | Comments

RFMW , Ltd. announces application and sales support for the Telemakus TEP4000-5 digital phase shifter. This laboratory quality phase shifter has a minimum phase range of 360 degrees with 12-bit, 0.25 degree resolution and operates over the bandwidth of 2 to 4GHz.

LISTED UNDER: Digital
Advertisement

Antennas enable cellular coverage inside a building

January 14, 2014 4:14 pm | Pulse Electronics | Product Releases | Comments

Pulse Electronics Corporation introduces 3 new low passive inter-modulation (PIM) distributed antenna system (DAS) in-building, ceiling mount omni antennas. With an industry-leading PIM spec of -155 dBc at 2x20 watts, Pulse Electronics' line of PIMinators meets the most demanding requirements of cellular operators....

LISTED UNDER: Handheld

Company releases world’s lowest profile active and passive antennas

January 14, 2014 11:21 am | Telit Wireless Solutions | Product Releases | Comments

Telit Wireless Solutions and Parsec Technologies announced that a combination of the companies’ technologies results in the world’s lowest-profile companion solution for GPS receiver and antenna. For host devices able to accommodate higher volumetric symmetry, assembly of the components can be made to fit a 6x16x8mm volume.

LISTED UNDER: Receivers

Positioning module achieves superior battery life performance

December 20, 2013 3:39 pm | Telit Wireless Solutions | Product Releases | Comments

Telit Wireless Solutions announced the market introduction of Jupiter SL869 V2, the second generation of one of its top performing positioning products. The new module is based on the low-power MT3333 from MediaTek. The complete multi-GNSS receiver features easy integration and superior battery-life performance....

LISTED UNDER: Receivers

Voltage controlled oscillator operates at 2380 MHz with a control voltage range of 0.3V~4.7 V

December 19, 2013 3:39 pm | Crystek Crystal | Product Releases | Comments

Crystek's CVCO55CC-2380-2380 VCO (Voltage Controlled Oscillator) operates at 2380 MHz with a control voltage range of 0.3V~4.7 V. This VCO features a typical phase noise of -119 dBc/Hz @ 10 KHz offset and has excellent linearity. Output power is typically +2.5 dBm.

LISTED UNDER: Voltage Controlled

Timing product families offer sub-200fs of phase jitter for PCIe clock applications

December 17, 2013 1:50 pm | Micrel | Product Releases | Comments

Micrel launched the PL6020xxx and PL6070xxx clock generators along with the SY7557xL clock distribution family that provides extremely low phase noise for the PCI-Express (PCIe) reference clock signals and industry leading output-to-output skew.

LISTED UNDER: Clock
Advertisement

True sinewave clock oscillator provides -170 dBc/Hz noise floor at 1 MHz offset

December 12, 2013 2:36 pm | Crystek Crystal | Product Releases | Comments

Crystek Crystals Corporation has launched the CCSS-945 – a True SineWave Clock Oscillator (XO) providing -170 dBc/Hz noise floor at 1 MHz offset. The close-in phase noise performance is an industry-leading -105 dBc/Hz typical at 10 Hz offset.

LISTED UNDER: Clock

Piezoelectric MEMS timing product targets communications infrastructure, industrial and military apps

December 6, 2013 4:43 pm | Product Releases | Comments

Sand 9 announced it is the first MEMS company to achieve the stringent low-noise, high-stability and harsh environmental requirements for communications infrastructure, industrial and military applications. The TM651, based on Sand 9’s Temperature Compensated MEMS

LISTED UNDER: Clock | RF | Temperature Compensated

Voltage controlled oscillator operates from 902 MHz to 928 MHz

December 6, 2013 10:11 am | Crystek Crystal | Product Releases | Comments

Crystek's CVCO25CL-0902-0928 VCO (Voltage Controlled Oscillator) operates from 902 MHz to 928 MHz with a control voltage range of 0.5V~3.5V. This VCO features a typical phase noise of -108 dBc/Hz @ 10KHz offset and has excellent linearity.

LISTED UNDER: Voltage Controlled

6-bit phase shifters offer 360 degree coverage

December 4, 2013 8:53 am | Rfmw Ltd | Product Releases | Comments

RFMW, Ltd. announces design and sales support for two new 6-bit phase shifters from TriQuint. Both the TGP2105-SM and TGP2107-SM offer 360 degree coverage with 5.625 degree LSB. Supporting X and Ku bands, the TGP2105-SM and TGP2107-SM span 6-18GHz and offer <10dB insertion loss.

LISTED UNDER: Band Pass

Phase shifters offer a frequency range up to 12 GHz

November 25, 2013 4:14 pm | Vaunix Technology Corporation | Product Releases | Comments

Vaunix Technology Corporation has added two new models to the their Lab Brick Phase Shifter family, the LPS-402 and LPS-123. The LPS-402 offers a frequency range of 2 – 4 GHz while the LPS123 ranges from 8 – 12 GHz. The phase for both models can be set from the easy to install and use GUI....

LISTED UNDER: Audio Frequency

L/S Band Filter Diplexer reduces size, weight and power for unmanned vehicle communications

November 12, 2013 1:50 pm | MtronPTI | Product Releases | Comments

MtronPTI announced the LF9422 Series L/S Band Filter Diplexer reducing size, weight and power (SWaP) for unmanned vehicle communications. UAVs must operate with a minimum of weight and power yet maintain network-centric communication – command, data and often real-time video – with their ground operators.

LISTED UNDER: Band Pass

CMOS clock oscillator includes an ultra-miniature surface mount footprint of 2.0 x 1.6 mm

November 11, 2013 1:49 pm | Product Releases | Comments

Qantek Technology USA has introduced their new CMOS Clock Oscillator, which features an ultra-miniature surface mount footprint of 2.0 x 1.6 mm, very low mass and power requirements. The QC1 was specifically designed for portable applications....

LISTED UNDER: Clock

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading