Advertisement
Oscillators

VCO operates from 1000 MHz to 2000 MHz

July 11, 2014 4:44 pm | Crystek Crystal | Product Releases | Comments

The CVCO55BE-1000-2000 VCO (Voltage Controlled Oscillator) from Crystek (Fort Myers, FL) operates from 1000 MHz to 2000 MHz with a control voltage range of 1.0V~20V. This VCO features a typical phase noise of -95 dBc/Hz @ 10KHz offset and has excellent linearity....

LISTED UNDER: RF & Microwave/Communications | Oscillators | Voltage Controlled
Advertisement

Wide-frequency universal clocks offer ultra-low jitter

April 24, 2014 4:48 pm | Exar | Product Releases | Comments

Exar Corporation (Fremont, CA) announced an addition to its range of telecommunications timing products with a new family of Universal Clocks. The XR811xx series offers a wide range of output frequencies from 10MHz to 1.5GHz, with ultra-low phase noise jitter of less than 200fs....

LISTED UNDER: Clock

RF signal generator series offers standard AM/FM/Phase modulation

April 23, 2014 10:29 am | Saelig Company, Inc. | Product Releases | Comments

Saelig Company (Fairport, NY) has introduced a high-performance RF signal source family, the DSG3000 3GHz/6GHz series, offering standard AM/FM/Phase modulation, as well as options for I/Q modulation and I/Q baseband output. The DSG3000 Series generates waveforms with high signal purity....

LISTED UNDER: RF

1.8V oscillators intended for low-cost EMI reduction

April 9, 2014 2:41 pm | Saelig Company, Inc. | Product Releases | Comments

Saelig Company, Inc. (Fairport, NY has introduced another oscillator to the Euroquartz range of Spread Spectrum low-EMI oscillators that uses spread spectrum (dithered) techniques to reduce electromagnetic interference by up to 15dB. The new 18HM series oscillators have a supply voltage of 1.8V....

LISTED UNDER: RF

Temperature-compensated crystal oscillators include accuracy to +/-.5ppm or better

March 26, 2014 4:52 pm | Precision Devices, Inc. | Product Releases | Comments

Precision Devices Inc. (Middleton, WI) has announced a major expansion of its TCXO (Temperature Compensated Crystal Oscillator) product line. These new products target applications where available circuit board space is at a premium or products that require excellent long term precision....

LISTED UNDER: Crystal | Temperature Compensated

RF Amplifiers & Oscillator

March 26, 2014 4:31 pm | Pro-Comm, Inc. | Products

Pro-Comm provides custom fabrication of RF Microwave amplifiers, oscillators and systems within the 400-3000 MHz bandwidth at powers ranging from 100 watts to 50,000 watts peak

LISTED UNDER: Power | Pulse | RF

Quartz-based oscillators designed for networking and storage applications

March 11, 2014 10:19 am | Rfmw Ltd | Product Releases | Comments

RFMW, Ltd. (San Jose, CA) announces application and sales support for high-frequency oscillators and VCXOs to 1500MHz. These quartz-based, differential, and PECL oscillators are targeted to networking and storage applications where fast delivery (less than one week) and high performance are required.

LISTED UNDER: Audio Frequency

Surface mount OCXO features a compact footprint of only 14.3 mm x 9.3 mm x 6.7 mm

February 18, 2014 10:03 am | Product Releases | Comments

Fox Electronics (Fort Myers, FL) now offers the low-power FTP301AH, a surface-mount OCXO featuring a compact footprint of only 14.3 mm x 9.3 mm x 6.7 mm (L x W x H) and power consumption of only 0.6 W maximum. The new SMD HCMOS OCXO incorporates a Stratum 3 clock for enhanced timing performance.

LISTED UNDER: Crystal

Oscillators designed for telecom clocking applications

January 23, 2014 10:13 am | Precision Devices, Inc. | Product Releases | Comments

Precision Devices, a member of the Avrio Technology Group, LLC., has announced the introduction of the LV5 and PE5 series of LVDS and PECL (respectively) oscillators. These are ideally suited for communication systems where low jitter and small size are required by chipset suppliers and system architecture.

LISTED UNDER: Clock

Voltage controlled oscillator operates at 2380 MHz with a control voltage range of 0.3V~4.7 V

December 19, 2013 3:39 pm | Crystek Crystal | Product Releases | Comments

Crystek's CVCO55CC-2380-2380 VCO (Voltage Controlled Oscillator) operates at 2380 MHz with a control voltage range of 0.3V~4.7 V. This VCO features a typical phase noise of -119 dBc/Hz @ 10 KHz offset and has excellent linearity. Output power is typically +2.5 dBm.

LISTED UNDER: Voltage Controlled

Timing product families offer sub-200fs of phase jitter for PCIe clock applications

December 17, 2013 1:50 pm | Micrel | Product Releases | Comments

Micrel launched the PL6020xxx and PL6070xxx clock generators along with the SY7557xL clock distribution family that provides extremely low phase noise for the PCI-Express (PCIe) reference clock signals and industry leading output-to-output skew.

LISTED UNDER: Clock

True sinewave clock oscillator provides -170 dBc/Hz noise floor at 1 MHz offset

December 12, 2013 2:36 pm | Crystek Crystal | Product Releases | Comments

Crystek Crystals Corporation has launched the CCSS-945 – a True SineWave Clock Oscillator (XO) providing -170 dBc/Hz noise floor at 1 MHz offset. The close-in phase noise performance is an industry-leading -105 dBc/Hz typical at 10 Hz offset.

LISTED UNDER: Clock

Piezoelectric MEMS timing product targets communications infrastructure, industrial and military apps

December 6, 2013 4:43 pm | Product Releases | Comments

Sand 9 announced it is the first MEMS company to achieve the stringent low-noise, high-stability and harsh environmental requirements for communications infrastructure, industrial and military applications. The TM651, based on Sand 9’s Temperature Compensated MEMS

LISTED UNDER: Clock | RF | Temperature Compensated

Voltage controlled oscillator operates from 902 MHz to 928 MHz

December 6, 2013 10:11 am | Crystek Crystal | Product Releases | Comments

Crystek's CVCO25CL-0902-0928 VCO (Voltage Controlled Oscillator) operates from 902 MHz to 928 MHz with a control voltage range of 0.5V~3.5V. This VCO features a typical phase noise of -108 dBc/Hz @ 10KHz offset and has excellent linearity.

LISTED UNDER: Voltage Controlled

Phase shifters offer a frequency range up to 12 GHz

November 25, 2013 4:14 pm | Vaunix Technology Corporation | Product Releases | Comments

Vaunix Technology Corporation has added two new models to the their Lab Brick Phase Shifter family, the LPS-402 and LPS-123. The LPS-402 offers a frequency range of 2 – 4 GHz while the LPS123 ranges from 8 – 12 GHz. The phase for both models can be set from the easy to install and use GUI....

LISTED UNDER: Audio Frequency

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading