Advertisement
Medical

AC-DC power supplies designed for non-life support medical applications

January 23, 2015 9:20 am | by Power Sources Unlimited, Inc. | Product Releases | Comments

The new PM202 Series of compact 200W AC-DC power supplies from Power Sources Unlimited, Inc. (Wrentham, MA) are specifically designed for non-life support medical applications that require EN/UL 60601-1 safety standards. The single output ...

LISTED UNDER: AC to DC | Medical

DDP400 400W Sealed Power Module

January 19, 2015 3:04 pm | ROAL Electronics | Products

Silent, Compact, Resilient High efficiency 400W AC-DC Power Supply in a compact 38 cubic inch IP67 package, 20% smaller than competing 300W modules with minimal thermal or environmental limitations. With 94% efficiency these units are ideal for digital outdoor displays, LED lighting, harsh environments, and clean room equipment. Convection or conduction cooled. • Universal input voltage range • 400W rated power (440W peak) • Very low standby consumption < 0.5W • 12, 24 and 48V standard output varaiants • Active PFC, EN61000-3-2 compliant (Class C, >40 W load) • Sealed packaging • Low earth leakage current • Stand-by 5V, 2A output • Auxiliary 12V, 1A output • 4000m altitude operation • RoHS-6 compliant

LISTED UNDER: AC to DC | Encapsulated | Medical

RCB600 4-Output Configurable Power Supply

January 19, 2015 2:47 pm | ROAL Electronics | Products

The RCB600 is the smallest commercially available configurable power solution consisting of a main chassis with up to 4 isolated output modules, offers unrivalled performance and flexibility and delivers 600W from a 600g, 5 × 3” 1U package, the RCB600 is The series carries UL60950 and EN60950 safety approvals and complies with EN61000-3, EN6100-4 and EN55022-B EMC standards. Features • Universal input voltage • Active power factor correction • High power density (25W/in3) • 600W output • High reliability • High efficiency • Remote voltage programming • Remote current • Parallel operation • Accurate wired current share • Current output signal • N+1 redundancy compatible • Global 5V 200mA bias supply • RoHS-6 compliant

LISTED UNDER: AC to DC | Isolated | Medical
Advertisement

PSUs in 1U package offer very high power density

May 19, 2014 10:10 am | Excelsys Technologies Ltd | Product Releases | Comments

Excelsys Technologies (Cork, Ireland) introduced its XSolo family of 1U-high, single-output switching power supply units (PSUs). The XSolo family is offered in a convection-cooled 504-W open-frame U-channel form-factor model (6.8 W/cu.in.) and an enclosed, fan-cooled chassis model that delivers…

LISTED UNDER: Medical | Switching

Power supplies certified to EN60601-1 3rd edition medical safety standards

May 12, 2014 4:37 pm | Protek Power North America | Product Releases | Comments

The PMP220 Series of desktop power supplies from Protek Power (Hudson, MA) deliver up to 220W of power and are certified to EN60601-1 3rd edition medical safety standards. Features include: Class I and Class II medical grade units that accept a 90-264VAC  input

LISTED UNDER: Medical

2-W DC/DC converters are medically approved

April 17, 2014 12:30 pm | MicroPower Direct, LLC | Product Releases | Comments

Micropower Direct’s (Stoughton, MA) MG200MHI Series is a family of compact, 2-W DC/DC converters fully approved to both EN 60950 and EN 60601. They are specifically designed to meet the stringent isolation, reinforced insulation and low leakage requirements of

LISTED UNDER: DC to DC | Medical

Medical grade, 65-W power adapters are approved to latest safety standards

February 28, 2014 2:41 pm | Tumbler Technologies + Trumpower | Product Releases | Comments

TRUMPower (Santa Clara, CA) launched the TMP65 Series of low cost medical grade AC/DC desktop power adapters, which has both Class I and Class II models availability. The TMP65 Class II units, furnished with an IEC 320/C8 AC inlet without a ground pin, are

LISTED UNDER: AC to DC | Medical

2W DC/DC converters designed to serve medical-grade equipment

December 5, 2013 4:13 pm | MicroPower Direct, LLC | Product Releases | Comments

Available immediately from MicroPower Direct, the ML200MHI series is a family of compact, 2W DC/DC converters fully approved to both EN 60950 and EN 60601. They are specifically designed to meet the stringent isolation, reinforced insulation, and low leakage requirements of medical-grade equipment.

LISTED UNDER: DC to DC | Medical
Advertisement

Power supplies designed for medical applications

December 5, 2013 1:58 pm | SL Power Electronics Corporation | Product Releases | Comments

SL Power Electronics announces its MB60S single-output, convection-cooled, wide temperature range power supply that provides 60 watts of power in an ultra-compact  2” x 3” x 1.0” package. Joining SL Power’s line of high-density open frame AC/DC medical-grade power supplies, the MB60S is approved to the highest safety standards....

LISTED UNDER: Medical

Medical desktop switcher features up to 94% efficiency

November 22, 2013 2:04 pm | Advanced Power Solutions | Product Releases | Comments

Advanced Power Solutions (APS) announces the release of the APS250EMG series of medical approved desktop switching power supplies with up 94% efficiency and <0.5W No Load Power Consumption for compliance to Level V standards. The APS250EMG series consists of 3 standard models offering single outputs of 12V @ 20A / 24V @ 12 / 48v @ 6A output power....

LISTED UNDER: Medical | Switching

150-Watt, AC/DC power supplies are 80 Plus certified

May 8, 2013 11:07 am | Product Releases | Comments

XP Power announced the GCS150 series of IT and medically approved 150-W single output AC/DC power supplies that meet the stringent internationally recognized 80 Plus Silver energy efficiency specifications. With active power factor correction (PFC), the series have a typical efficiency of

LISTED UNDER: AC to DC | Medical
X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading