Advertisement
DC to DC

DC/DC converter family accepts 85-400VDC input range

September 19, 2014 10:51 am | Beta Dyne | Product Releases | Comments

The VHV15 DC/DC Converter Family from BetaDyne (Bridgewater, MA) is designed with a wide input range and nominal single and dual outputs. Additional features include input-to-output isolation, short circuit protection, thermal protection ...

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

300W 1/8th-brick DC-DC converter features digital control

September 4, 2014 3:29 pm | TDK Corporation of America | Product Releases | Comments

TDK Corporation (San Diego, CA) announces the introduction of the 300W TDK-Lambda iEH series of isolated DC-DC converters. Featuring digital non-linear adaptive control, these converters provide better dynamic performance, improved system stability ...

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

DC/DC converters feature typical efficiency of 86%

August 22, 2014 9:15 am | Beta Dyne | Product Releases | Comments

The FWA15S and FWA15D series from Beta Dyne (Bridgewater, MA) of regulated 15W single & dual DC/DC converters feature industry standard pinout in a standard 2" x 1" metal package with a minimum isolation voltage of 2000Vdc, maximum efficiency of 86%....

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC
Advertisement

DC/DC controller draws only 50µA in standby

August 21, 2014 1:49 pm | Linear Technology Corporation | Product Releases | Comments

Linear Technology Corporation (Milpitas, CA) introduces the LTC3807, a low quiescent current synchronous step-down DC/DC controller that draws only 50µA in standby mode with the output voltage in regulation. The 4V to 38V input supply range is designed to protect against high voltage transients....

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

Dual-output DC/DC controller operates with 0.25 milliohm sense resistance

August 18, 2014 10:38 am | Linear Technology Corporation | Product Releases | Comments

Linear Technology Corporation (Milpitas, CA) announces the LTC3882, a dual-output multiphase synchronous step-down DC/DC controller with a serial digital interface. The LTC3882 uses leading-edge modulation voltage-mode control for excellent transient response....

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

DIN rail DC-DC converter line range up to 600 W

August 12, 2014 9:32 am | CUI Inc. | Product Releases | Comments

CUI, Inc. (Tualatin, OR) announced the expansion of their DIN rail dc-dc product line with the addition of over 90 new high wattage models ranging from 50~600 W. The VHK and VFK DIN families are high efficiency isolated dc-dc converters packaged in a rugged aluminum case....

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

Single-output DC/DC converters offer a wide 4:1 input range

July 31, 2014 12:52 pm | Calex Mfg | Product Releases | Comments

Calex Mfg. Co., Inc. (ConcordCA) announces the availability of the 150W HCM Series of single output DC/DC Converters. The HCM offers a wide 4:1 input range, 9 to 36VDC, and 18 to 75VDC. Output voltages available are 3.3, 5, 12, 15 and 24VDC. All models are isolated input to output....

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

2.5W output DC/DC micromodule converter includes 2kVAC galvanic isolation

July 30, 2014 5:02 pm | Linear Technology Corporation | Product Releases | Comments

Linear Technology Corporation (Milpitas, CA) introduces the LTM8046, a 2.5W output DC/DC µModule (micromodule) converter with 2kVAC galvanic isolation (production tested to 3kVDC) in a 9mm x 15mm x 4.92mm ball grid array (BGA) package. A minimum creepage distance of 4.3mm on the package exterior supports operation....

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC
Advertisement

DC-DC converter series designed for compact industrial applications

July 30, 2014 10:15 am | Schaefer Power Inc | Product Releases | Comments

Schaefer, Inc. (Hopkinton, MA) announces the TEC-100 and TEC-200 Series of isolated dc-dc converters that provide 100W and 200W of continuous power and feature high efficiency (up to 93%) and –60°С to +125°С operating temperature range....

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

DC/DC power solution fuels bus-powered applications

July 29, 2014 1:13 pm | Texas Instruments | Product Releases | Comments

Texas Instruments (Dallas, TX) expanded its industry-leading Thunderbolt portfolio with the TPS65980 DC/DC switching regulator, the first fully integrated power solution for bus-powered Thunderbolt applications. The TPS65980 is the centerpiece of  TI’s certified Thunderbolt single port peripheral reference design....

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

Synchronous boost controller reduces thermal stress with up to 98% efficiency

July 23, 2014 1:37 pm | Linear Technology Corporation | Product Releases | Comments

Linear Technology Corporation (Milpitas, CA) announces the LTC3769, a synchronous step-up DC/DC controller that replaces the boost diode with a high efficiency N-channel MOSFET, increasing efficiency and maximizing output current capability. This controller produces 24V at up to 5A output....

LISTED UNDER: Power Sources & Signal Conditioning Devices | DC to DC

DC-DC converter provides a full 108W of 12V power

July 21, 2014 10:15 am | Semiconductor Circuits, Inc. | Product Releases | Comments

Semiconductor Circuits, Inc. (Atkinson, NH) introduces the CPE9B36 “Cool Power Technologies” 12V, 9A wide input range 8th brick DC-DC converter. This open frame module provides a full 108W of 12V power @ 55C & 200lfm of airflow – ideal for bus converter or distributed power architecture applications....

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

COTS demi-brick size converters come in package size less than 2 ounces

July 10, 2014 4:29 pm | Synqor, Inc. | Product Releases | Comments

SynQor, Inc. (Boxborough, MA) announces the release of its Military Commercial-Off-The-Shelf (COTS) Demi Brick Series of DC-DC converters. The new Demi Brick is an isolated and fully regulated converter in a 1.55" x 1.52" x 0.50" size package....

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

25-Watt 1”x 1” DC/DC converter offers a 2:1 input range

July 9, 2014 11:40 am | Contech, A Division Of Calex | Product Releases | Comments

ConTech (Concord, CA) announced the “QMS” Series of DC/DC converters. The QMS Series offers up to 25 Watts of fully regulated output power. The series offers a 2:1 input range with nominal input voltages of 12 V, 24 V, and 48 VDC.

LISTED UNDER: DC to DC

DC-DC converters feature remote on/off, remote sense, and output voltage adjustment

July 7, 2014 12:10 pm | Product Releases | Comments

GE’s Critical Power business (Dallas, TX) has launched its new SHHN000A3CL isolated DC-DC converters, providing board designers with a bipolar dual-output module in a compact footprint. The latest addition to GE’s Hammerhead series of power modules ...

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading