Advertisement
DC to DC

DIN rail mountable power supply is only one inch wide

April 23, 2015 8:56 am | by Automation Systems Interconnect (Asi) | Automation Systems Interconnect (Asi) | Product Releases | Comments

Automation Systems Interconnect Inc. (ASI) introduces a 24 Vdc DIN rail mountable power supply that is only one inch wide. The new ASIUSP-24PFN-15D has an input range is from 90 to 264 Vac and 120 to 370 Vdc and an output of 1.6 Amp at 15 Vdc. It is ideal for sensor applications. The wide input range makes this power supply a ...

LISTED UNDER: DC to DC

DC-DC converters with IP66-rated protection suit extreme environments

April 6, 2015 8:45 am | by Absopulse | Product Releases | Comments

ABSOPULSE Electronics’ HVI 500-D3G series of high input voltage, ultra-rugged, IP66-rated DC-DC converters are designed and built for extreme applications that require a waterproof, dust-proof, sand-proof, oil-, fire- and/or explosion-proof solution. They are typically used in heavy industry, mining ...

LISTED UNDER: DC to DC

Digital Point-of-Load module series powers advanced ICs

March 31, 2015 7:41 am | by Cui Inc | Cui Inc | Product Releases | Comments

CUI Inc announced the release of its highest current digital POL family to date. Designed specifically to address the rapidly-rising power requirements of today’s most advanced integrated circuits, the NDM3Z-90 is a non-isolated module outputting 90 A in ultra low-profile vertical and horizontal packages....

LISTED UNDER: DC to DC
Advertisement

Synchronous buck regulator provide output tracking and sequencing for FPGAs

March 18, 2015 8:52 am | by Intersil | Intersil | Product Releases | Comments

Intersil Corporation announced the ISL8002B synchronous buck (step-down) switching regulator that delivers up to 2A of continuous output current from a 2.7V to 5.5V input supply. The device’s 2MHz switching frequency provides superior transient response, and its key features ...

LISTED UNDER: Power Management | Power Supply Circuits | DC to DC

DC-DC converters feature ultra-wide 4:1 input voltage

March 13, 2015 5:12 pm | by Power Sources Unlimited, Inc. | Power Sources Unlimited, Inc. | Product Releases | Comments

The new TEQ-WIR Series of 100, 160 and 200 watt high performance DC-DC converters with ultra-wide 4:1 input voltage ranges and EN 50155 approval for railway applications. The shock and vibration resistant TEQ-WIR Series are available in single output voltages of 12, 24, 28 and 48VDC. The chassis mount product is designed ...

LISTED UNDER: DC to DC

DC-DC converters provide input voltage range of 18-75 volts DC

February 25, 2015 1:55 pm | by Ge Energy | Ge Energy | Product Releases | Comments

GE’s new 228-watt (W) quarter-brick QHHD019A0B isolated DC-DC converters are the latest addition to its Hammerhead series of DC-DC modules. The low-height converters provide a single, precisely regulated output voltage over an ultra-wide input voltage range of 18-75 volts DC. Cost-effective and energy- and space-efficient ...

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

DC-DC converters provide up to 3.6 amperes DC output current

February 10, 2015 1:03 pm | by Ge Energy | Ge Energy | Product Releases | Comments

GE's new ERCW003A6R 100-watt, one-eighth brick DC-DC converters, the latest addition to its Orca-series family of isolated, board-mounted power amplifier modules. The new high-efficiency converters provide high-voltage and high-power applications with up to ...

LISTED UNDER: DC to DC

DC/DC converter offers 360 watts of output power

February 9, 2015 3:11 pm | by Calex Mfg | Calex Mfg | Product Releases | Comments

Calex Mfg. Co., Inc. of Concord California announces the introduction of the wide input range MTW series. The MTW offers 360 watts of output power in a standard ½ brick case. Available output voltages are 12, 15, 24 and 28VDC. The input range for all models is 9 to 36VDC with ...

LISTED UNDER: DC to DC
Advertisement

DC/DC module simplifies power supply design

January 30, 2015 11:18 am | by Intersil | Intersil | Product Releases | Comments

Intersil Corporation announced the ISL8203M, a dual 3A/single 6A step-down DC/DC power module that simplifies power supply design for FPGAs, ASICs, microprocessors, DSPs and other point of load conversions in communications, test and measurement ...

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

25 W DC/DC converters provide high power density

January 28, 2015 8:10 am | by MicroPower Direct, LLC | MicroPower Direct, LLC | Product Releases | Comments

The MI2500RU series, a family of miniature 25W DC/DC converters, is available immediately from MicroPower Direct. These high-performance power converters are designed to provide the high power density, long field reliability, and high-performance features required ...

LISTED UNDER: DC to DC

DC/DC converters designed for electric vehicle applications

December 22, 2014 3:06 pm | Calex Mfg | Product Releases | Comments

Green Watt Power, a division of Calex Mfg. Co., Inc. (Concord, CA) announces the EVD-450 Series of DC/DC converters designed specifically for electric vehicle applications. The input range options for the EVD-450 are 30 – 65VDC, 60 – 90VDC, and ...

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

DC/DC converter achieves efficiency of 85%

December 11, 2014 3:29 pm | Beta Dyne | Product Releases | Comments

The BHE30006 from Beta Dyne (Bridgewater, MA) is a high-performance, low-noise, isolated DC/DC converter consisting of a single output. The converter incorporates low switching noise techniques at the input and synchronous rectification on ...

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

PoL DC-DC converter delivers 50 A/165 Watts

December 10, 2014 2:25 pm | Murata Power Solutions Inc. | Product Releases | Comments

Murata (Mansfield, MA) has announced the OKDx-T/50 series of 50 Amp digitally controlled point-of-load (PoL) DC-DC converters from Murata Power Solutions. These converters, adding to Murata’s Okami range of non-isolated converters, are ...

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

Ultra-compact power modules feature a footprint of only 2.9 mm x 2.3 mm

November 24, 2014 1:11 pm | TDK Corporation of America | Product Releases | Comments

TDK Corporation (Iselin, NJ) announces a new series of ultra-compact EPCOS µDC-DC converters featuring a footprint of only 2.9 mm x 2.3 mm and an insertion height of 1 mm. One 6-MHz power switch is embedded in the miniature PCB. The integrated ...

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

Low-profile DC-DC power modules designed for space-constrained applications

October 2, 2014 1:44 pm | Micrel | Product Releases | Comments

Micrel, Inc. (San Jose, CA) introduced the MIC33163/MIC33164 (1A) and MIC33263/MIC33264(2A) a family of low-profile step down power modules capable of 100 percent duty cycle and operating with an input voltage range from 2.7V to 5.5V....

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading