Advertisement

DC-DC converter family housed in a 76 x 31.5 x 25.8 mm DIN-Rail package

April 7, 2014 9:48 am | CUI Inc. | Product Releases | Comments

CUI Inc (Tualatin, OR) announced a compact DIN rail dc-dc converter line to ease installation in industrial environments. The converter family is housed in a slim 76 x 31.5 x 25.8 mm (2.99 x 1.24 x 1.02 in) DIN-Rail package with all electrical connections easily accessible via screw terminals....

LISTED UNDER: DC to DC

DC/DC converter available in ultra-compact SIP-8 package

April 2, 2014 2:06 pm | XP Power | Product Releases | Comments

XP Power (Sunnyvale, CA) today announced the ITX series of 6 Watt DC/DC converters encapsulated in an industry standard SIP 8-pin package measuring just 0.86 x 0.44 x 0.36 inches (21.85 x 11.1 x 9.2 mm). Delivering a power density of up to 46 Watts per cubic inch...

LISTED UNDER: DC to DC

Two-Watt DC/DC "cube" halves industry standard footprint

March 19, 2014 10:54 am | Murata Power Solutions Inc. | Product Releases | Comments

The MTU2 Series of miniature surface mounted 2-W DC/DC converters from Murata Power Solutions (Mansfield, MA) is believed to be the industry's smallest 2-W converter and measures 8.2 mm x 8.4 mm x 8.5 mm with a 0.69 cm2 footprint and presented as being 50 percent smaller than

LISTED UNDER: DC to DC
Advertisement

DC-DC converters feature improved efficiency and short-circuit protection

March 13, 2014 4:30 pm | Mornsun America LLC | Product Releases | Comments

Mornsun has launched the IF/B_XT-1WR2, F/B_XT-2WR2, F_D-1WR2, R2 series of DC-DC converters. Compared with the old generation, they have improved on efficiency, no-load power consumption, and short-circuit protection. They also feature compact size....

LISTED UNDER: DC to DC

DC/DC controller capable of delivering up to 50A output current

March 13, 2014 11:27 am | Micrel | Product Releases | Comments

Micrel (San Jose, CA) announced that it would be previewing the MIC2111 DC/DC multi-mode controller at the Applied Power Electronics Conference and Exposition, APEC 2014. The industry conference will be held March 16-20, at the Fort Worth Convention Center.

LISTED UNDER: DC to DC

Step-up, micro DC/DC converter includes integrated coil

March 6, 2014 1:06 pm | Product Releases | Comments

TOREX SEMICONDUCTOR (Tokyo, Japan) has developed the XCL101 series, the first step-up type converter in the XCL series of micro DC/DCs with integrated coil. The XCL101 series is a step-up micro DC/DC converter with integrated coil in an ultra-small CL-2025 package....

LISTED UNDER: DC to DC

Quarter-brick DC-DC converter intended for wireless backhaul, smart grid, and networking applications

March 5, 2014 3:40 pm | Murata Power Solutions Inc. | Product Releases | Comments

Murata (Mansfield, MA) announced the UWQ 240 Watt quarter-brick DC-DC converter from Murata Power Solutions designed for wireless backhaul, smart grid, and a broad range of networking and other telecommunications applications. With a fixed 12 VDC/20 A single output...

LISTED UNDER: DC to DC

Step-up DC/DC converter delivers a low-noise, low-ripple 15V bias supply

March 4, 2014 1:13 pm | Linear Technology Corporation | Product Releases | Comments

Linear Technology Corporation (Milpitas, CA) announces the LT3048, a step-up DC/DC converter with an integrated LDO output that delivers a low-noise, low-ripple 15V bias supply. The LT3048-15 delivers up to 40mA of continuous output current at 15V....

LISTED UNDER: DC to DC
Advertisement

DC/DC converters ideal for powering IGBT drivers

February 20, 2014 4:32 pm | Richardson RFPD, Inc. | Product Releases | Comments

Richardson RFPD (LaFox, IL) today announces availability and full design support capabilities for a large portfolio of high-isolation DC-to-DC converters from RECOM Power, Inc. (RECOM). Designed specifically for insulated-gate bipolar transistor (IGBT) systems, the converters' asymmetric outputs of +15V and -9V make them ideal to power IGBT drivers, replacing the need for two converters.

LISTED UNDER: DC to DC

Step-up DC/DC controller can produce a 24V output at 10A

February 19, 2014 2:59 pm | Linear Technology Corporation | Product Releases | Comments

Linear Technology Corporation (Milpitas, CA) announces the LTC3784, a high-power, two-phase, single-output synchronous step-up DC/DC controller that replaces rectifying boost diodes with high efficiency N-channel MOSFETs. This device can produce a 24V output at 10A from a 12V input at up to 97% efficiency without any heat sink.

LISTED UNDER: DC to DC

4:1 input, 1" x 2", 50-W DC/DC converters target applications requiring very wide inputs

February 14, 2014 11:12 am | MicroPower Direct, LLC | Product Releases | Comments

MicroPower Direct’s (Stoughton, MA) MB5000RU Series delivers 50 W of isolated, tightly regulated output power in a 1 x 2 x 0.4 inch case. The converters are designed for applications requiring very wide inputs, compact size, high

LISTED UNDER: DC to DC

2100 watt DC/DC converter offers efficiency up to 97%

February 12, 2014 4:40 pm | Calex Mfg | Product Releases | Comments

Calex Mfg. Co., Inc. (Concord, CA) introduces the MBH Series DC/DC Converters. The MBH offers up to 2100 Watts in a low-profile 9.0" x 6.5" x 1.25"H ruggedized chassis mount package. The module weighs only 3.3 lbs. making the MBH ideal for harsh shock and vibration environments in both COTS military and industrial applications.

LISTED UNDER: DC to DC

Current-mode step-up converter offers adjustable output voltage up to 27V

February 10, 2014 2:22 pm | by ECN Staff | Advanced Power Electronics Corp. USA | Product Releases | Comments

Advanced Power Electronics Corp. (San Jose, CA) is introducing a new current mode step up converter for small, low power applications. The input voltage of the APE1913-3 converter can range from 2.6V to 5.5V, while the output voltage can be adjusted up to 27V.

LISTED UNDER: DC to DC

25W DC/DC converter features wide 2:1 input voltage ranges

February 10, 2014 1:59 pm | Product Releases | Comments

Boasting industry leading power density, Minmax Power (Hudson, MA) introduces the MJW25 Series of 25 Watt DC/DC converters that are housed in a compact 1”x1” shielded metal package. All models feature  wide 2:1 input voltage ranges of 9-18VDC, 18-36VDC, or 36-75VDC....

LISTED UNDER: DC to DC

DC/DC products offer high efficiency, isolation

February 7, 2014 1:21 pm | Beta Dyne | Product Releases | Comments

BetaDyne (Bridgewater, MA) announces the low output noise LN-Series of DC/DC converters designed specifically to meet the needs of signal sensitive applications such as unmanned vehicles, test and measurement systems, medical instruments and data acquisition and control systems.

LISTED UNDER: DC to DC

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading