Advertisement

Two-output DC-DC converters designed for satellite power systems

June 26, 2014 4:19 pm | International Rectifier | Product Releases | Comments

International Rectifier (El Segundo, CA) announced the introduction of the D Series of low power radiation-tolerant two output DC-DC converters developed to meet the high-reliability design needs of satellite power systems. The new D28xxD and D50xxxxP D Series of DC-DC converters offer extremely low output noise....

LISTED UNDER: DC to DC

High-current PMBus converters integrate MOSFETs

June 23, 2014 2:38 pm | Texas Instruments | Product Releases | Comments

Texas Instruments (Dallas, TX) introduced what it says are the industry’s first 18-V, 20-A and 30-A synchronous DC/DC buck converters with PMBus interface. The SWIFT TPS544B20 and TPS544C20 converters feature small QFN packages and integrated MOSFETs to drive ASICs in space-constrained and power-dense applications

LISTED UNDER: Power Management | Power Supply Circuits | DC to DC

COTS quarter bricks offer up to 300W of power

June 16, 2014 9:14 am | Synqor, Inc. | Product Releases | Comments

SynQor, Inc. (Boxborough, MA) announces the release of its Military Commercial-Off-The-Shelf (COTS) EXA Series of isolated and fully regulated DC-DC Converters. This new EXA Series offers up to 300W of power in a quarter brick package. These highly efficient (95% at full load), high power density DC-DC converters have a 28V nominal input voltage....

LISTED UNDER: DC to DC
Advertisement

DC/DC converters provide 2,000 VDC of input-output isolation

June 13, 2014 9:04 am | Beta Dyne | Product Releases | Comments

A new addition to the economical F-Series line of DC/DC converters from Beta Dyne (Bridgewater, MA), the DIP package style products are available in output power levels of  3W, 5W, 6W, and 10W. All provide 2,000 VDC of input-output isolation and come in industry-standard packages and pinouts....

LISTED UNDER: DC to DC

Hybrid regulated ratio quarter-brick delivers up to 600 W in powering advanced telecoms applications

May 27, 2014 8:45 am | Ericsson Power Modules | Product Releases | Comments

Ericsson (Stockholm, Sweden) has introduced the third version of its high-power-density quarter-brick power module based on the company’s innovative Hybrid Regulated Ratio (HRR) topology. The PKM4613NH is designed to power applications that require stable voltage and…

LISTED UNDER: DC to DC

Converter modules offer very high density, efficiency

May 20, 2014 9:28 am | Vicor Corp. | Product Releases | Comments

Vicor (Andover, MA) announced a new platform of isolated, regulated DC/DC converter modules based on the company’s Converter housed in Package (ChiP) power component platform. Delivering up to 2X the power density of conventional DC/DC converters…

LISTED UNDER: DC to DC

COTS DC-DC power supply units accept a wide range 28VDC input

May 2, 2014 3:54 pm | Product Releases | Comments

Powerstax (Sun City West, AZ) has just added 2 new switch-mode COTS DC-DC power supply units to its portfolio which are designed to cope with even the most demanding application environments. The Behlman VPXtraä 1000CM is a rugged, highly reliable, OpenVPX, and Vita 62 compliant unit....

LISTED UNDER: DC to DC

Two-watt DC-DC converter suits "high/low" side IGBT drive applications

April 24, 2014 4:12 pm | Murata Power Solutions Inc. | Product Releases | Comments

Murata (Mansfield, MA) announced the MGJ2 series of 2-Watt high-isolation dual-output DC/DC converters from Murata Power Solutions. These compact encapsulated devices are suitable for powering "high side" and "low side" gate drives in bridge circuits using insulated-gate bipolar transistors....

LISTED UNDER: DC to DC
Advertisement

2-W DC/DC converters are medically approved

April 17, 2014 12:30 pm | MicroPower Direct, LLC | Product Releases | Comments

Micropower Direct’s (Stoughton, MA) MG200MHI Series is a family of compact, 2-W DC/DC converters fully approved to both EN 60950 and EN 60601. They are specifically designed to meet the stringent isolation, reinforced insulation and low leakage requirements of

LISTED UNDER: DC to DC | Medical

Bus converter modules provide desirable power density

April 17, 2014 9:49 am | Vicor Corp. | Product Releases | Comments

Vicor Corporation (Andover, MA) announced the newest entries in its portfolio of isolated bus converter modules (BCMs) based on the company's Converter housed in Package (ChiP) power component platform. Supplying up to

LISTED UNDER: DC to DC

High-voltage power module addresses 12V, 24V, 36V, and 48V input rail applications

April 14, 2014 4:16 pm | Intersil | Product Releases | Comments

Intersil Corporation (Milpitas, CA) announced the ISL8216M 80 Volt, 4 Amp non-isolated DC/DC step-down power module. The ISL8216M power module provides a complete power supply in a package that can be used across multiple applications....

LISTED UNDER: DC to DC

DC/DC converter series provides 36 W of output power at 12 VDC

April 11, 2014 2:13 pm | Semiconductor Circuits, Inc. | Product Releases | Comments

Semiconductor Circuits, Inc. (Atkinson, NH) introduced the new Cool Power Technologies 36-W wide input range 32nd brick DC/DC converter series. These open frame modules provide 36 W of output power at 12 VDC – appropriate for

LISTED UNDER: DC to DC

DC-DC converter family housed in a 76 x 31.5 x 25.8 mm DIN-Rail package

April 7, 2014 9:48 am | CUI Inc. | Product Releases | Comments

CUI Inc (Tualatin, OR) announced a compact DIN rail dc-dc converter line to ease installation in industrial environments. The converter family is housed in a slim 76 x 31.5 x 25.8 mm (2.99 x 1.24 x 1.02 in) DIN-Rail package with all electrical connections easily accessible via screw terminals....

LISTED UNDER: DC to DC

DC/DC converter available in ultra-compact SIP-8 package

April 2, 2014 2:06 pm | XP Power | Product Releases | Comments

XP Power (Sunnyvale, CA) today announced the ITX series of 6 Watt DC/DC converters encapsulated in an industry standard SIP 8-pin package measuring just 0.86 x 0.44 x 0.36 inches (21.85 x 11.1 x 9.2 mm). Delivering a power density of up to 46 Watts per cubic inch...

LISTED UNDER: DC to DC

Two-Watt DC/DC "cube" halves industry standard footprint

March 19, 2014 10:54 am | Murata Power Solutions Inc. | Product Releases | Comments

The MTU2 Series of miniature surface mounted 2-W DC/DC converters from Murata Power Solutions (Mansfield, MA) is believed to be the industry's smallest 2-W converter and measures 8.2 mm x 8.4 mm x 8.5 mm with a 0.69 cm2 footprint and presented as being 50 percent smaller than

LISTED UNDER: DC to DC

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading