Advertisement

DC-DC converter series designed for compact industrial applications

July 30, 2014 10:15 am | Schaefer Power Inc | Product Releases | Comments

Schaefer, Inc. (Hopkinton, MA) announces the TEC-100 and TEC-200 Series of isolated dc-dc converters that provide 100W and 200W of continuous power and feature high efficiency (up to 93%) and –60°С to +125°С operating temperature range....

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

DC/DC power solution fuels bus-powered applications

July 29, 2014 1:13 pm | Texas Instruments | Product Releases | Comments

Texas Instruments (Dallas, TX) expanded its industry-leading Thunderbolt portfolio with the TPS65980 DC/DC switching regulator, the first fully integrated power solution for bus-powered Thunderbolt applications. The TPS65980 is the centerpiece of  TI’s certified Thunderbolt single port peripheral reference design....

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

Synchronous boost controller reduces thermal stress with up to 98% efficiency

July 23, 2014 1:37 pm | Linear Technology Corporation | Product Releases | Comments

Linear Technology Corporation (Milpitas, CA) announces the LTC3769, a synchronous step-up DC/DC controller that replaces the boost diode with a high efficiency N-channel MOSFET, increasing efficiency and maximizing output current capability. This controller produces 24V at up to 5A output....

LISTED UNDER: Power Sources & Signal Conditioning Devices | DC to DC
Advertisement

DC-DC converter provides a full 108W of 12V power

July 21, 2014 10:15 am | Semiconductor Circuits, Inc. | Product Releases | Comments

Semiconductor Circuits, Inc. (Atkinson, NH) introduces the CPE9B36 “Cool Power Technologies” 12V, 9A wide input range 8th brick DC-DC converter. This open frame module provides a full 108W of 12V power @ 55C & 200lfm of airflow – ideal for bus converter or distributed power architecture applications....

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

COTS demi-brick size converters come in package size less than 2 ounces

July 10, 2014 4:29 pm | Synqor, Inc. | Product Releases | Comments

SynQor, Inc. (Boxborough, MA) announces the release of its Military Commercial-Off-The-Shelf (COTS) Demi Brick Series of DC-DC converters. The new Demi Brick is an isolated and fully regulated converter in a 1.55" x 1.52" x 0.50" size package....

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

25-Watt 1”x 1” DC/DC converter offers a 2:1 input range

July 9, 2014 11:40 am | Contech, A Division Of Calex | Product Releases | Comments

ConTech (Concord, CA) announced the “QMS” Series of DC/DC converters. The QMS Series offers up to 25 Watts of fully regulated output power. The series offers a 2:1 input range with nominal input voltages of 12 V, 24 V, and 48 VDC.

LISTED UNDER: DC to DC

DC-DC converters feature remote on/off, remote sense, and output voltage adjustment

July 7, 2014 12:10 pm | Product Releases | Comments

GE’s Critical Power business (Dallas, TX) has launched its new SHHN000A3CL isolated DC-DC converters, providing board designers with a bipolar dual-output module in a compact footprint. The latest addition to GE’s Hammerhead series of power modules ...

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

Two-output DC-DC converters designed for satellite power systems

June 26, 2014 4:19 pm | International Rectifier | Product Releases | Comments

International Rectifier (El Segundo, CA) announced the introduction of the D Series of low power radiation-tolerant two output DC-DC converters developed to meet the high-reliability design needs of satellite power systems. The new D28xxD and D50xxxxP D Series of DC-DC converters offer extremely low output noise....

LISTED UNDER: DC to DC
Advertisement

High-current PMBus converters integrate MOSFETs

June 23, 2014 2:38 pm | Texas Instruments | Product Releases | Comments

Texas Instruments (Dallas, TX) introduced what it says are the industry’s first 18-V, 20-A and 30-A synchronous DC/DC buck converters with PMBus interface. The SWIFT TPS544B20 and TPS544C20 converters feature small QFN packages and integrated MOSFETs to drive ASICs in space-constrained and power-dense applications

LISTED UNDER: Power Management | Power Supply Circuits | DC to DC

COTS quarter bricks offer up to 300W of power

June 16, 2014 9:14 am | Synqor, Inc. | Product Releases | Comments

SynQor, Inc. (Boxborough, MA) announces the release of its Military Commercial-Off-The-Shelf (COTS) EXA Series of isolated and fully regulated DC-DC Converters. This new EXA Series offers up to 300W of power in a quarter brick package. These highly efficient (95% at full load), high power density DC-DC converters have a 28V nominal input voltage....

LISTED UNDER: DC to DC

DC/DC converters provide 2,000 VDC of input-output isolation

June 13, 2014 9:04 am | Beta Dyne | Product Releases | Comments

A new addition to the economical F-Series line of DC/DC converters from Beta Dyne (Bridgewater, MA), the DIP package style products are available in output power levels of  3W, 5W, 6W, and 10W. All provide 2,000 VDC of input-output isolation and come in industry-standard packages and pinouts....

LISTED UNDER: DC to DC

Hybrid regulated ratio quarter-brick delivers up to 600 W in powering advanced telecoms applications

May 27, 2014 8:45 am | Ericsson Power Modules | Product Releases | Comments

Ericsson (Stockholm, Sweden) has introduced the third version of its high-power-density quarter-brick power module based on the company’s innovative Hybrid Regulated Ratio (HRR) topology. The PKM4613NH is designed to power applications that require stable voltage and…

LISTED UNDER: DC to DC

Converter modules offer very high density, efficiency

May 20, 2014 9:28 am | Vicor Corp. | Product Releases | Comments

Vicor (Andover, MA) announced a new platform of isolated, regulated DC/DC converter modules based on the company’s Converter housed in Package (ChiP) power component platform. Delivering up to 2X the power density of conventional DC/DC converters…

LISTED UNDER: DC to DC

COTS DC-DC power supply units accept a wide range 28VDC input

May 2, 2014 3:54 pm | Product Releases | Comments

Powerstax (Sun City West, AZ) has just added 2 new switch-mode COTS DC-DC power supply units to its portfolio which are designed to cope with even the most demanding application environments. The Behlman VPXtraä 1000CM is a rugged, highly reliable, OpenVPX, and Vita 62 compliant unit....

LISTED UNDER: DC to DC

Two-watt DC-DC converter suits "high/low" side IGBT drive applications

April 24, 2014 4:12 pm | Murata Power Solutions Inc. | Product Releases | Comments

Murata (Mansfield, MA) announced the MGJ2 series of 2-Watt high-isolation dual-output DC/DC converters from Murata Power Solutions. These compact encapsulated devices are suitable for powering "high side" and "low side" gate drives in bridge circuits using insulated-gate bipolar transistors....

LISTED UNDER: DC to DC

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading