Advertisement

50 VA rugged pure sine wave inverter targets CCTV systems

July 11, 2014 10:29 pm | Product Releases | Comments

ABSOPULSE Electronics (Ottawa, Canada) has released the CSI 50-24/24-FT, an industrial quality low voltage DC-AC sine wave inverter specifically designed for powering CCTV systems. The inverter uses...

LISTED UNDER: Inverters

COTS demi-brick size converters come in package size less than 2 ounces

July 10, 2014 4:29 pm | Synqor, Inc. | Product Releases | Comments

SynQor, Inc. (Boxborough, MA) announces the release of its Military Commercial-Off-The-Shelf (COTS) Demi Brick Series of DC-DC converters. The new Demi Brick is an isolated and fully regulated converter in a 1.55" x 1.52" x 0.50" size package....

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

25-Watt 1”x 1” DC/DC converter offers a 2:1 input range

July 9, 2014 11:40 am | Contech, A Division Of Calex | Product Releases | Comments

ConTech (Concord, CA) announced the “QMS” Series of DC/DC converters. The QMS Series offers up to 25 Watts of fully regulated output power. The series offers a 2:1 input range with nominal input voltages of 12 V, 24 V, and 48 VDC.

LISTED UNDER: DC to DC
Advertisement

Attenuators suitable for broadcast, HDTV, and satcom applications

July 8, 2014 3:30 pm | by ECN Staff | Product Releases | Comments

Pasternack Enterprises, Inc. (Irvine, CA) has announced their expanded line of 75 Ohm F attenuators. This new line of F-type attenuators is suitable for broadcast, HDTV, and satcom applications in the L and S microwave bands up to 3 GHz....

LISTED UNDER: Power Sources & Signal Conditioning Devices | Attenuators | Microwave & RF

Three-phase DIN rail power supplies designed for tight spaces

July 7, 2014 12:20 pm | Automation Systems Interconnect (Asi) | Product Releases | Comments

Automation Systems Interconnect (ASI) (Mechanicsburg, PA) has announced compact 80 mm wide three-phase DIN rail power supplies for tight spaces. The twelve models in the series meet the Machinery Directive EN60204-1 requirements and have a 92%+ maximum efficiency rating....

LISTED UNDER: Power Supplies

DC-DC converters feature remote on/off, remote sense, and output voltage adjustment

July 7, 2014 12:10 pm | Product Releases | Comments

GE’s Critical Power business (Dallas, TX) has launched its new SHHN000A3CL isolated DC-DC converters, providing board designers with a bipolar dual-output module in a compact footprint. The latest addition to GE’s Hammerhead series of power modules ...

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

Two-output DC-DC converters designed for satellite power systems

June 26, 2014 4:19 pm | International Rectifier | Product Releases | Comments

International Rectifier (El Segundo, CA) announced the introduction of the D Series of low power radiation-tolerant two output DC-DC converters developed to meet the high-reliability design needs of satellite power systems. The new D28xxD and D50xxxxP D Series of DC-DC converters offer extremely low output noise....

LISTED UNDER: DC to DC

15 Watt AC-DC power supply targets medical applications

June 25, 2014 10:05 am | XP Power | Product Releases | Comments

XP Power (Sunnyvale, CA) announced the EML15 series of 15 Watt single-output AC-DC power supplies suitable for use in medical equipment. Complying with 3rd edition EN60601-1, ES60601-1, CSA-C22.2 No. 60601-1, IEC60601-1 medical safety standards, this extremely compact power supply is believed to be the smallest device....

LISTED UNDER: AC to DC
Advertisement

Desktop power supply meets efficiency Level VI standards

June 23, 2014 4:43 pm | Product Releases | Comments

The Power Partners (Hudson, MA) expands their medical power supply offering with the introduction of the PEAMD150 Series of AC/DC adapters that provide 150W in a compact 7” x 2.56” x 1.57” case. The PEAMD150 Series is approved to the highest safety standards....

LISTED UNDER: AC to DC

High-current PMBus converters integrate MOSFETs

June 23, 2014 2:38 pm | Texas Instruments | Product Releases | Comments

Texas Instruments (Dallas, TX) introduced what it says are the industry’s first 18-V, 20-A and 30-A synchronous DC/DC buck converters with PMBus interface. The SWIFT TPS544B20 and TPS544C20 converters feature small QFN packages and integrated MOSFETs to drive ASICs in space-constrained and power-dense applications

LISTED UNDER: Power Management | Power Supply Circuits | DC to DC

Power supply series extends to 650V output

June 23, 2014 10:29 am | TDK Corporation of America | Product Releases | Comments

TDK Corporation (Neptune, NJ) announces the introduction of high voltage models to TDK-Lambda’s Z+ series of 200W and 400W programmable DC power supplies. The series is now available with output voltages of up to 160, 320 or 650VDC, extending the line-up from 100VDC maximum....

LISTED UNDER: Programmable

Energy storage systems perform under extreme environmental conditions

June 18, 2014 7:46 pm | Schaefer Power Inc | Product Releases | Comments

Schaefer Inc. (Hopkinton, MA) announced the New SCS family of air or liquid cooled energy storage solutions for mission critical or remote location requirements that need to perform under extreme environmental conditions in…

LISTED UNDER: Standby

COTS quarter bricks offer up to 300W of power

June 16, 2014 9:14 am | Synqor, Inc. | Product Releases | Comments

SynQor, Inc. (Boxborough, MA) announces the release of its Military Commercial-Off-The-Shelf (COTS) EXA Series of isolated and fully regulated DC-DC Converters. This new EXA Series offers up to 300W of power in a quarter brick package. These highly efficient (95% at full load), high power density DC-DC converters have a 28V nominal input voltage....

LISTED UNDER: DC to DC

DC/DC converters provide 2,000 VDC of input-output isolation

June 13, 2014 9:04 am | Beta Dyne | Product Releases | Comments

A new addition to the economical F-Series line of DC/DC converters from Beta Dyne (Bridgewater, MA), the DIP package style products are available in output power levels of  3W, 5W, 6W, and 10W. All provide 2,000 VDC of input-output isolation and come in industry-standard packages and pinouts....

LISTED UNDER: DC to DC

AC-DC switching power supply achieves 10 kW

June 11, 2014 9:49 am | Pioneer Magnetics | Product Releases | Comments

Pioneer Magnetics (Santa Monica, CA) announces a 10 kW AC-DC switching power supply in a 5” X 5” X 17.5” package. One of the most important aspects of this technical breakthrough of the PM38220B series is for the end user to be able to double its power by adding just 2 additional inches....

LISTED UNDER: AC to DC | Switching

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading