Advertisement
Power Supplies

Medical-grade power supply boasts BF-rated outputs

December 16, 2014 11:08 am | Product Releases | Comments

Power Partners’ (Hudson, MA) new PMAM200 Series is a unique medical power supply that provides 200W of power and features both BF rated outputs and Class I and II AC grounding schemes in a compact 3” x 5” footprint. The slim 1.48” height easily ...

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies

DC/DC converter achieves efficiency of 85%

December 11, 2014 3:29 pm | Beta Dyne | Product Releases | Comments

The BHE30006 from Beta Dyne (Bridgewater, MA) is a high-performance, low-noise, isolated DC/DC converter consisting of a single output. The converter incorporates low switching noise techniques at the input and synchronous rectification on ...

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

PoL DC-DC converter delivers 50 A/165 Watts

December 10, 2014 2:25 pm | Murata Power Solutions Inc. | Product Releases | Comments

Murata (Mansfield, MA) has announced the OKDx-T/50 series of 50 Amp digitally controlled point-of-load (PoL) DC-DC converters from Murata Power Solutions. These converters, adding to Murata’s Okami range of non-isolated converters, are ...

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC
Advertisement

Compact 500 watt power supply fits 4” x 6” footprint

December 3, 2014 3:59 pm | XP Power | Product Releases | Comments

XP Power (Sunnyvale, CA) today announced the GSP500 series of highly efficient 500 Watt AC-DC power supplies. Occupying a compact 4 x 6 inch footprint, these single-output forced air cooled units can continuously deliver the full output power across ...

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | AC to DC

Ultra-compact power modules feature a footprint of only 2.9 mm x 2.3 mm

November 24, 2014 1:11 pm | TDK Corporation of America | Product Releases | Comments

TDK Corporation (Iselin, NJ) announces a new series of ultra-compact EPCOS µDC-DC converters featuring a footprint of only 2.9 mm x 2.3 mm and an insertion height of 1 mm. One 6-MHz power switch is embedded in the miniature PCB. The integrated ...

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

Power supply series extends to 800W 650V output

November 24, 2014 9:33 am | TDK Corporation of America | Product Releases | Comments

TDK Corporation (San Diego, CA) announces the introduction of 800W high voltage models to TDK-Lambda’s Z+ series of programmable DC power supplies. The series is now available with output voltages of 0-10, 0-20, 0-36, 0-60, 0-160 ...

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | Programmable

PWM controller features integrated power stage driver

November 20, 2014 4:07 pm | Product Releases | Comments

ZMD AG (Dresden, Germany) announces the release of the ZSPM2000, a configurable true digital PWM controller with integrated MOSFET driver for smart digital point-of-load (POL) solutions. ZMDI’s ZSPM2000 operates as a synchronous step-down ...

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies

Power supplies comply with latest level VI energy efficiency standard

November 13, 2014 2:22 pm | XP Power | Product Releases | Comments

XP Power (Sunnyvale, CA) announced what it believes to be one of the first 5 Watt plug top power supplies to comply with the new Energy Star level VI energy efficiency standard. A requirement for all such external power supplies in use from February 2016 ...

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies
Advertisement

AC/DC power supplies designed to meet energy saving eco-design standards

November 13, 2014 10:01 am | MicroPower Direct, LLC | Product Releases | Comments

Available immediately from MicroPower Direct (Stoughton, MA), the MPG-120S series is a family of high performance 120W open-frame AC/DC power supplies specifically designed to meet energy saving eco-design standards. Fabricated on a ...

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | AC to DC

Power divider provides in-phase power splitting

November 12, 2014 3:07 pm | Product Releases | Comments

From Knowles Capacitors (Cazenovia, NY) comes a Wilkinson power divider, the PDW05758, from their Dielectric Laboratories (DLI) facility. It is designed to provide in-phase power splitting or combining over a broad bandwidth in low-power ...

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies

IGBT modules intended for high-power industrial applications

November 4, 2014 1:10 pm | International Rectifier | Product Releases | Comments

International Rectifier (El Segundo, CA) introduced a comprehensive family of IGBT modules for high power industrial applications including motor drive inverters, switch mode power supplies (SMPS), uninterruptible power supplies (UPS), solar inverters ...

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies

AC-DC power supplies deliver 1,300 W

October 17, 2014 2:22 pm | Murata Power Solutions Inc. | Product Releases | Comments

Murata announced the addition of a 1300 Watt model to their D1U3CS series of front-end AC-DC power supplies from Murata Power Solutions. The D1U3CS 1300 series can deliver 1,300 Watts from the wide 108 to 264 VAC universal input, is hot pluggable, has no minimum load requirement

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | AC to DC

Chipscale MOSFET cuts power consumption for ultraportable applications

October 2, 2014 2:08 pm | Vishay Intertechnology | Product Releases | Comments

A new power MOSFET that will help decrease power consumption and extend battery usage in smartphones, tablets, wearable devices, and high-end notebook computers was released today by Vishay Intertechnology, Inc. (Malvern, PA)....

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies

Low-profile DC-DC power modules designed for space-constrained applications

October 2, 2014 1:44 pm | Micrel | Product Releases | Comments

Micrel, Inc. (San Jose, CA) introduced the MIC33163/MIC33164 (1A) and MIC33263/MIC33264(2A) a family of low-profile step down power modules capable of 100 percent duty cycle and operating with an input voltage range from 2.7V to 5.5V....

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

Power supply series includes constant voltage and constant current modes

October 1, 2014 4:03 pm | B&K Precision Corporation | Product Releases | Comments

B&K Precision (Yorba Linda, CA) announced its latest multi-range DC power supply, the model 9111, expanding its 9110 multi-range supply offering. With constant voltage (CV) and constant current (CC) modes, the 9111 automatically recalculates voltage....

LISTED UNDER: Power Sources & Signal Conditioning Devices | Power Supplies | DC to DC

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading