TCXO Exhibits Tight Stability

October 13, 2008 6:52 am | Product Releases | Comments

Coming in a 2 mm × 2.50 mm × 0.46 mm package, Tellurian Technologies’ TT-VT6000 TCXO offers a stability of ±0.50 ppm over a temperature range from 0°C to 55°C. The component demonstrates current consumption of <2 mA and initial tolerance of ±0.50 ppm over supply voltages as low as 2.50 V. Applications include mobile wireless communications, dedicated

LISTED UNDER: Passive & Discrete Devices

Ferrite Beads Come in EIA-0201 Size

October 10, 2008 8:20 am | Product Releases | Comments

Designed to reduce power circuit noise, Taiyo Yuden’s BKP0603 Series multilayer ferrite chip beads come in an EIA-0201 size (0.6 mm × 0.3 mm × 0.3 mm). The components presents impedances of 22 O and 33 O at 1 A. The beads perform in the DC/DC converters and power supply circuits in cell phones and portable battery-powered

LISTED UNDER: Passive & Discrete Devices

Coupling Chip Antenna Geared to Micro Communication Products

October 9, 2008 12:00 pm | Product Releases | Comments

Featuring sensitivity to environmental interference, the 5320 Coupling Chip Antenna from Yageo Corporation is intended for micro communication products, including Bluetooth headsets, smart phones, and others. Requiring 3 mm to 5 mm in clearance on motherboards, the antenna supports bandwidths of 2.4 GHz to 2.484 GHz, Bluetooth and IEEE 802.11 bgn applications

LISTED UNDER: Passive & Discrete Devices

DSA Offers Serial-Addressable Control Interface

October 9, 2008 9:14 am | Product Releases | Comments

Controlling up to 8 different attenuators using a common 3-wire interface bus, Peregrine Semiconductor's PE43703 7-bit UltraCMOS digital step attenuator (DSA) presents a serial-addressable control interface. The 5 mm × 5 mm × 0.85 mm 32-lead QFN-packaged device covers a 31.75 dB attenuation range in 0.25 dB, 0.50 dB, or

LISTED UNDER: Passive & Discrete Devices

Attenuators Demonstrate Four Attenuation Values

October 9, 2008 6:10 am | Product Releases | Comments

Measuring 0.125" × 0.250" × 0.015", State of the Art’s MTA1225 Series multi-tap attenuators offer standard attenuation values of 1 dB, 3 dB, 6 dB, and 10 dB on a single chip. VSWR for all 4 values is <1.500:1 with attenuation tolerance of ±0.500 dB or 10%, whichever is greater. The chips eliminate the use of multiple attenuator devices in attenuation switching

LISTED UNDER: Passive & Discrete Devices

Coupler Functions in GaN MMIC Devices

October 9, 2008 5:02 am | Product Releases | Comments

Covering the 1,000 MHz to 2,500 MHz frequency range, Innovative Power Products’ Model IPP-4011 transforming 90º hybrid coupler combines 2 signals of up to 300 W CW total output power in GaN MMIC devices with 25 O input and output impedances. The 2.20” × 0.80” × 0.23” drop-in style-packaged device offers 2 ports at 50 O impedance and

LISTED UNDER: Passive & Discrete Devices

Patch Antenna Receives/Transmits Two Different Frequency Bands in a Single Element

October 8, 2008 9:40 am | Product Releases | Comments

Spectrum Control designed a single element patch antenna that can receive and/or transmit two frequency bands in one 45 mm package, offering a space and cost savings compared to using two, single frequency patch antennas. These patch antennas were developed for GPS (global positioning systems) using either Globalstar: telephone and low-speed data communications or Iridium: worldwide voice and data communications using handheld

LISTED UNDER: Passive & Discrete Devices

Clamp Filters for Electromagnetic Noise Countermeasures in Automotive Applications

October 8, 2008 9:29 am | Product Releases | Comments

TDK Corporation announced the development and mass production of its ZCAT08V-BK and ZCAT12V-BK automotive clamp filters for use as a countermeasure against the effects of electromagnetic noise on the cables that link the various onboard electronic control units that are used applications such as antilock braking systems and electric power

LISTED UNDER: Passive & Discrete Devices

Midspan and Splitter Enable PoE Solutions

October 8, 2008 5:15 am | Phihong | Product Releases | Comments

Meeting IEEE802.3at specifications, Phihong’s Gb-compatible POE60U-560G midspan and POE45-120 splitter power multi-radio access point arrays in business and educational environments, and thin client terminals for call centers and kiosks. The 60 W one-port midspan performs in applications requiring up to 52 W of low-voltage DC power. The 45 W

LISTED UNDER: Passive & Discrete Devices

Capacitors Function in High Voltage Bus Apps

October 6, 2008 8:42 am | Product Releases | Comments

Presenting voltage ratings from 100 VDC to 500 VDC, ITW Paktron’s RA Series multi-layer polymer (MLP) film capacitors are designed for high voltage bus applications. The devices exhibit capacitance values from 0.1 µF to 10 µF in commercial and military infrastructure products. The capacitors do not crack when exposed to temperature extremes or

LISTED UNDER: Passive & Discrete Devices

UHF-Band VCO Yields Low Phase Noise

October 3, 2008 11:42 am | Product Releases | Comments

Operating from 902 MHz to 928 MHz, Z-Communications’ ZRO0915C2LF UHF-band VCO exhibits a typical phase noise of -128 dBc/Hz at 10 KHz offset, -100 dBc/Hz at 1 KHz offset, and -148 dBc/Hz at 100 KHz offset. The 0.75” × 0.75” × 0.22” ZMX-14-SM-packaged component shows a linear tuning voltage range from 0 VDC to

LISTED UNDER: Passive & Discrete Devices

Chip Capacitor Includes Flexiterm Termination

October 3, 2008 9:20 am | Avx Corporation | Product Releases | Comments

Presenting compatibility with standard SMT reflow processes, AVX’s tip and ring chip capacitor uses a standard nickel barrier solder plate Flexiterm termination. The MLC unit demonstrates a X7R dielectric rating from -55°C to 125°C with a capacitance value of up to 1.2 micofarads, TELCO rating of 250 VDC, and dielectric withstand voltage of

LISTED UNDER: Passive & Discrete Devices

Power Inductors Show Tight Tolerance

October 2, 2008 11:42 am | Product Releases | Comments

Being magnetically shielded and epoxy molded, API Delevan’s SP1812, SP1210, and SP1008 Series SMT power inductors exhibit tolerances down to 2%. The SP1008 Series displays inductance from 0.270 µH to 100 µH and max. current ratings from 1.070 ADC to 0.102 ADC. The SP1210 Series possesses an inductance range from 0.470 µH to 390 µH and

LISTED UNDER: Passive & Discrete Devices

OCXOs Suit Microwave Signal Sources

October 1, 2008 6:09 am | Product Releases | Comments

Covering output frequencies from 30 MHz to 130 MHz, Bliley Technologies’ NV26AJ Series oven-controlled crystal oscillators (OCXOs) are appropriate for radar, communications, and test system applications. The components demonstrate output up to 15 dBm, typical power consumption of 1 W at 25°C, and noise performance from -167 dBc/Hz to -130 dBc/Hz at

LISTED UNDER: Passive & Discrete Devices

VCSO Offers Low Jitter

September 30, 2008 8:34 am | Product Releases | Comments

The VSO9900A voltage controlled SAW device based oscillator (VCSO) from Raltron Electronics offers jitter at high frequencies such as 622.08 MHz. The family has been designed for a frequency range from 400 MHz to 1 GHz. Offered in a 5 mm x 7 mm x 2.5 mm package, the VCSO family produces jitter as low as 0.100 ps-rms within a bandwidth of 12 KHz to 20 MHz

LISTED UNDER: Passive & Discrete Devices


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.