Advertisement

Resistor features wide side terminal construction for high 2 W power rating

March 27, 2013 3:29 pm | Vishay Intertechnology | Product Releases | Comments

Vishay Intertechnology today announced a new surface-mount Power Metal Strip resistor featuring a wide side terminal construction that yields a high 2 W power rating in the compact 1020 case size. The WSL1020 combines its high power-to-footprint-size ratio with extremely low resistance values down to 0.003 Ω and stable resistance tolerances to 0.5  percent.

LISTED UNDER: Surface Mount
Advertisement

ZigBee radio chip enables deep sleep modes of set-top boxes

March 27, 2013 11:01 am | Product Releases | Comments

GreenPeak Technologies announces the GP501, a new generation of ZigBee transceivers which contains a sophisticated coexistence scheme that allows Wi-Fi, Bluetooth and ZigBee chips to work side by side in the same device. The GP501 also contains Deep Packet Inspection allowing deep sleep modes of set-top boxes....

LISTED UNDER: RF

RF chip capacitors intended for automotive applications

March 26, 2013 4:30 pm | Avx Corporation | Product Releases | Comments

AVX Corporation has introduced a new series of AEC-Q200-qualified RF chip capacitors for automotive applications.  Available in 0402 and 0603 case sizes, the new C0G (NP0) dielectric Automotive “U” Series capacitors exhibit ultra-low ESR, high Q, and lot-to-lot uniformity....

LISTED UNDER: Chips

Film capacitor achieve 40 percent volume reduction compared to its predecessor

March 21, 2013 4:32 pm | Tdk Corporation Of America | Product Releases | Comments

TDK Corporation announces significantly reduced size in EPCOS MKP film capacitors of the B3267*P* series. For example, the type with a capacitance of 1 µF and a rated voltage of 450 V DC has dimensions of only 8.0 x 17.5 x 13.0 mm3 thanks to a high capacitance density with a lead spacing of 10 mm.

LISTED UNDER: Film

Multi-bar diode laser system delivers up to 3-kilowatt output at 980nm wavelength

March 21, 2013 4:14 pm | Dilas Diode Laser, Inc. | Product Releases | Comments

DILAS announces today a direct, multi-bar diode laser system. The DILAS SD3000 is capable of delivering up to 3-kilowatt output at 980nm wavelength to the work piece. The direct diode laser system, DILAS SD3000, is available either with symmetric spot configuration (SD3000S) or with different line focus configurations (SD3000L).

LISTED UNDER: Laser

Polymer tantalum capacitors ideal for 48 volt automotive power supplies

March 20, 2013 9:51 am | Kemet Electronics Corporation | Product Releases | Comments

KEMET Corporation announced the expansion of its KEMET Organic Capacitor (KO-CAP) family with the release of 63 volt product extensions for the T521 High Voltage Polymer Series, as well as first-to-market extensions for the T540 and T541 Hi-Rel Polymer Commercial-Off-the-Shelf (COTS) Series and T543 Polymer Tantalum COTS Series.

LISTED UNDER: High Voltage

DSL splitter module includes lightning and power fault protection

March 19, 2013 2:41 pm | Pulse Electronics | Product Releases | Comments

Pulse Electronics Corporation introduces a central office (CO) VDSL2 splitter module with optional lightning and power fault protection. The module is designed with 6 pins instead of the standard 4 pins. This enables a protective device, such as a sidactor, to be added on the board underneath the module....

LISTED UNDER: Fuse Protection | Surge Protectors

Level Measurement Transducers

March 19, 2013 12:18 pm | Piezo Technologies | Products

Level measurement transducers can be modified for all types of environments, including aggressive chemical tanks, high temperature (900°F (482°C) continuous), and pressure applications. Piezo Technologies develops and manufactures semi-custom, modular, and pure custom (no off-the-shelf) ultrasonic transducer products. Our vast database of past projects provides a base for developing many new products as semi-custom or modular devices. This reduces both cost and turnaround time, while still providing a high quality, unique product. We also specialize in developing pure custom devices.

LISTED UNDER: MERG | Ultrasonic

Ultrasonic Immersion Transducers

March 19, 2013 12:17 pm | Piezo Technologies | Products

Piezo Technologies develops and manufactures semi-custom, modular, and pure custom (no off-the-shelf) ultrasonic transducer products. Our vast database of past projects provides a base for developing many new products as semi-custom or modular devices. This reduces both cost and turnaround time, while still providing a high quality, unique product. We also specialize in developing pure custom devices.

LISTED UNDER: MERG | Ultrasonic

High Temperature Transducers

March 19, 2013 12:15 pm | Piezo Technologies | Products

Piezo Technologies develops and manufactures semi-custom, modular, and pure custom (no off-the-shelf) ultrasonic transducer products. Our vast database of past projects provides a base for developing many new products as semi-custom or modular devices. This reduces both cost and turnaround time, while still providing a high quality, unique product. We also specialize in developing pure custom devices.

LISTED UNDER: MERG | Temperature | Ultrasonic

High Intensity Focused Ultrasound Transducer

March 19, 2013 12:10 pm | Piezo Technologies | Products

Piezo Technologies uses its extensive knowledge in piezo materials and processes to custom design and manufacture the most effective High Power Ultrasonic Transducers. Piezo Technologies provides semi-custom, modular, and pure custom ultrasonic transducer products for High Intensity Focused Ultrasound applications. None of our transducers are off-the-shelf. Each solution is designed for your specific applications. Our vast database of past projects provides a base for developing many new products as semi-custom or modular devices. This reduces both cost and turnaround time, while still providing a unique product. We also specialize in developing pure custom devices. Our technical experts are available to discuss your application and recommend an ultrasonic transducer product that will satisfy your specific requirements.

LISTED UNDER: MERG | Ultrasonic

Dual Element Transducers

March 19, 2013 12:07 pm | Piezo Technologies | Products

Piezo Technologies' Dual Element Transducers are designed for excellent near surface resolution while maintaining high sensitivity and are used for flaw detection, thickness gauging, cure monitoring, fluid flow Doppler probes, and level switches.

LISTED UNDER: MERG | Ultrasonic

Advanced Ultrasonic Downhole Transducers

March 19, 2013 12:05 pm | Piezo Technologies | Products

Piezo Technologies' leading-edge R&D has led to many unique Ultrasonic Downhole Solutions. Our piezo materials provide superior performance for imaging, NDT, sensing, and more. Our custom-engineered transducers are designed for Extremely Hostile Environments. We can meet the exact requirement of your downhole technology needs… without the compromises.

LISTED UNDER: Ultrasonic

Ultrasonic Contact Transducers

March 19, 2013 12:03 pm | Piezo Technologies | Products

Piezo Technologies' Ultrasonic Contact Transducers can be developed in longitudinal and normal incident shear; and low, medium, and high damping for most models. A NDT contact transducer is normally supplied with a wearface, but when specified, Piezo Technologies will acoustically optimize contact transducers for their intended application.

LISTED UNDER: Ultrasonic

Angle Beam Transducers

March 19, 2013 12:01 pm | Piezo Technologies | Products

Piezo Technologies' Angle Beam Ultrasonic Transducers are designed to provide excellent signal-to-noise ratio, optimum resolution, and high sensitivity for use in flaw detection, weld inspection and flow measuring. Angle Beam Transducers are detachable from the wedges allowing interchangeability.

LISTED UNDER: Ultrasonic

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading