Advertisement

Inductors target high-density power circuitry

June 10, 2014 11:49 am | Sumida America, Inc. | Product Releases | Comments

Magnetically shielded Sumida (Schaumburg, IL) CDRH3D23 Series Power Inductors are suitable for high-density power circuitry.  With ferrite drum construction and a unique geometry, these devices yield higher inductance values than…

LISTED UNDER: Ferrite Core
Advertisement

Touch-safe cover suits 10.3-mm x 38-mm fuse

June 9, 2014 9:57 am | Schurter Inc. | Product Releases | Comments

SCHURTER (Santa Rosa, CA) introduced the ESO 10.3x38 touch-safe fuse cover designed to safely and securely insert and extract 10.3-mm x 38-mm fuses. After inserting the ESO 10.3x38 with captive fuse into the fuse clips, the complete installation provides…

LISTED UNDER: Fuse Protection

MLCC in quad 2525 case size targets high-frequency RF applications

June 2, 2014 10:19 am | Vishay Intertechnology | Product Releases | Comments

Vishay Intertechnology (Malvern, PA) is adding to its QUAD HIFREQ series of high-power surface-mount multilayer ceramic chip capacitors (MLCCs) with a new device in the quad 2525 case size. The QUAD HIFREQ 2525 case device features…

LISTED UNDER: Ceramic | Ceramic Chips | Microwave

MLCCs are rated for 250 deg C

May 23, 2014 12:07 pm | Avx Corporation | Product Releases | Comments

AVX Corporation (Greenville, SC) introduced a new series of high temperature MLCCs rated for 250°C. Designed to accommodate the rapidly emerging military and commercial market demands for capacitors capable of high-reliability, long lifetime performance at operating temperatures in excess of…

LISTED UNDER: Ceramic | High Temperature

Current sense resistors are offered in 44-A, Zero Ohm and 1-W, 2010 versions

May 23, 2014 9:42 am | Koa Speer | Product Releases | Comments

KOA Speer Electronics (Bradford, PA) introduced two current sensing resistors, the zero Ohm SLZ  and the 1W/2012 SLW07. The high current SLZ1 jumper chip offers a rated current of 44 A in a 2512 size. The SLW07 has an enhanced high power rating of…

LISTED UNDER: Power

Thin-film surface-mount resistor series expanded to 11 standard sizes

May 21, 2014 3:43 pm | Rcd Components, Inc. | Product Releases | Comments

RCD Components (Manchester, NH) announced a breakthrough in their thin-film surface-mount resistor offering. The popular “BLU-chip” series has been expanded to 11 standard sizes from .02”X.01” to .40”X.25”, with temperature coefficients not before available in a thin film surface mount to as tight as 1ppm....

LISTED UNDER: Film | Surface Mount

TVS diodes provide necessary bidirectional port protection

May 21, 2014 3:25 pm | Bourns, Inc. | Product Releases | Comments

Bourns, Inc. (Riverside, CA) further expanded its comprehensive line of high-power TVS (PTVS) diodes with a new high current bidirectional TVS diode offered in an SMD package. Designated the Bourns Models PTVS10-058C-SH and PTVS10-076C-SH, the new PTVS diodes provide necessary bidirectional port protection....

LISTED UNDER: TVS Array

Medium power film capacitors suit high frequency and high pulse rise-time circuits

May 16, 2014 2:32 pm | Avx Corporation | Product Releases | Comments

AVX Corporation (Greenville, SC) released the new FM Series medium power film capacitors. Non-inductively wound with dry, metallized polypropylene film dielectric and encapsulated in a flame retardant plastic case sealed with self-extinguishing, thermosetting epoxy resin and…

LISTED UNDER: Film

Grid resistors offer high power ratings to 6.5 kW

May 16, 2014 11:33 am | Vishay Intertechnology | Product Releases | Comments

Vishay Intertechnology, Inc. (Malvern, PA) introduced a new series of high-power, high-current grid resistors. Vishay Milwaukee GRE1 devices combine high power ratings to 6.5 kW and high operating temperatures to +400 °C with…

LISTED UNDER: Power

2014 IMPACT Award Winner: Vishay Precision Group wins for Power Sources and Conditioning Devices

May 15, 2014 1:00 pm | Product Releases | Comments

Ultra-high-precision Z-Foil power current sensing resistors from Vishay Precision Group is for applications where rapid ΔR stabilization and resistance stability under transient power conditions are required. Features include low TCR of ±0.2 ppm/°C from -55°C to +125°C, +25°C ref.....

LISTED UNDER: Power

4-way passive splitter covers the common CATV bandwidth of 5 to 1002MHz

May 15, 2014 8:44 am | Rfmw Ltd | Product Releases | Comments

RFMW, Ltd. announces design and sales support for MiniRF’s 4-way splitter, model MRFSP0012. Covering the common CATV bandwidth of 5 to 1002MHz, the MRFSP0012 replaces three, 2-way splitters commonly used to achieve a 1 to 4 split thus saving board space, reducing part count ...

LISTED UNDER: Microwave & RF

Thin film resistors offer high accuracy

May 13, 2014 11:56 am | Product Releases | Comments

Vishay Intertechnology, Inc. introduced a new series of through-hole single-in-line thin film resistors. For high accuracy in precision, high-voltage instrumentation and amplifiers, the Vishay Dale Thin Film HVPS devices feature high resistance values to 10 MΩ, tight tolerances down to ± 0.01  percent, and high working voltages to 1800 V.

LISTED UNDER: Film

Non-inductive resistors feature extremely low thermal resistance

May 2, 2014 2:23 pm | Product Releases | Comments

BEC Distribution (UK), ARCOL's Premier UK Distributor has announced the availability of ARCOL's AP101 and AP140 non-inductive resistors which feature extremely low thermal resistance. They AP101 is capable of dissipating 100 watts and the AP140 can dissipate up to 140 watts, with a maximum current rating of 25A....

LISTED UNDER: Power

Limiter diodes provide fast turn-on time, low-loss, and low capacitance

May 2, 2014 10:03 am | Product Releases | Comments

SemiGen, Inc. (Manchester, NH) offers limiter diodes that feature fast turn-on time, low loss, low capacitance and resistance, and easy bonding. The company’s limiter diodes can be supplied in chip form or in a choice of packages.

LISTED UNDER: Current Limiting

Power resistor offers current ratings to 85 A

May 2, 2014 9:15 am | Vishay Intertechnology | Product Releases | Comments

Vishay Intertechnology (Malvern, PA) introduced a new universal edgewound power resistor. Providing a convenient drop-in replacement for competing solutions, the universal-mounted EDGU combines a high-reliability design....

LISTED UNDER: Power

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading