Advertisement

Connector Groups Target MR Imaging Technology

June 16, 2008 12:43 pm | Product Releases | Comments

Focusing on MR Imaging technology, Johnson’s MMCX non-magnetic RF connectors provide a snap-on coupling design that are suitable for flex and array coils in MRI equipment for appendages. The Type-Ndevices are made from high purity copper alloys and deliver

LISTED UNDER: Packaging & Interconnects

Connector Performs at High Temperatures

June 16, 2008 6:01 am | Product Releases | Comments

Performing at temperatures from -40°C to +175°C, Cinch Connectors’ Dura-Con Micro-D connector family has an insulator in tooled sizes in 9-15-25-50-100-120 positions and a seven-point twist-pin design. The interconnects in these devices can handle over 50 G of shock (Mil-Std 1344, Method 2004, Condition E) and 20 G of vibration (Mil-Std 1344, Method 2005, Condition IV). The connectors are appropriate

LISTED UNDER: Packaging & Interconnects

Solderless Contact Switch Survives 3,000 Cycles

June 13, 2008 9:57 am | Product Releases | Comments

With a life cycle of 3,000 operations, ITT Interconnect Solutions' Universal Contact stamped contact uses pre-loading and anti-lift designs and comes with dome contact points and “side wings”. Addressing solderless component interconnection applications

LISTED UNDER: Packaging & Interconnects
Advertisement

Drum Heaters Include Thermostat

June 11, 2008 9:51 am | Product Releases | Comments

Giving off even heat to the contents within, Omega Engineering’s DRUM-DHW-55 Series of OMEGALUX drum heaters wrap around a 55-gallon drum and have a built in thermostat calibrated from 10 to 218°C. The spring-and-hook devices are resistant to mechanical damage and attack from many chemical substances. The drum heaters have a built-in electrically electrically-grounded metal screen and

LISTED UNDER: Packaging & Interconnects

Fans Offer Tachometer Output

June 11, 2008 5:23 am | Product Releases | Comments

Giving an engineer the ability to monitor and report rotational speed, Orion Fans’ DC fans trigger a  5-V TTL or an “open collector” alarm signal to indicate that they have stopped or slowed significantly. The UL/cUL- and TUV-approved devices have a 2 period-per-revolution square-wave frequency and can

LISTED UNDER: Packaging & Interconnects

Cooler System Maintains Positive Cabinet Pressure

June 10, 2008 12:17 pm | Product Releases | Comments

Utilizing a compressed air supply to operate, Vortecs' Vortex A/C not only cools electrical enclosures but also creates a positive cabinet pressure to seal out contaminants, while hot air is expelled through a relief valve. Operating within a range from 27° to 32°C, the device has dual vortex tube cooling units

LISTED UNDER: Packaging & Interconnects

Touch Screen Surface Contains Finger Print Resistant Film

June 10, 2008 7:01 am | Product Releases | Comments

Uni-Pixel, Inc.has developed a new thin film it calls Opcuity FPR (Finger Print Resistant) that can be applied to

LISTED UNDER: Packaging & Interconnects

ExpressCard-to-PXI Extension Kit Creates More PXI Slots

June 5, 2008 10:14 am | Product Releases | Comments

Consisting of the EC-8560 ExpressCard and PXI-8565 PXI card, the multi-slot ExpressCard-to-PXI extension system from ADLINK Technology provides additional PXI slots for a laptop via a shielded cable connection up to 23’ in length. PXI devices installed in the extension PXI do not

LISTED UNDER: Packaging & Interconnects
Advertisement

International-use Switchmode Adapter has Interchangeable Plugs

June 5, 2008 6:57 am | Product Releases | Comments

Ventronics' Series FRM 024 12W-24W switchmode power adapter meets CEC Regulations, Efficiency Level IV and has UL/CSA/CE approvals. The single-output devices have slide-on, interchangeable AC plugs for USA, EU, UK, and Australia. There are eight models available accepting from 90 to 264 VAC with outputs from 0.9 to 2.5 A at 3 to 27 VDC with features that include overload and short-circuit protection.

LISTED UNDER: Packaging & Interconnects

Push-Pull Plug Connectors Provide Protection

June 3, 2008 11:51 am | Product Releases | Comments

The new VARIOSUB Push-Pull plug connector system from Phoenix Contact has a plug-and-play positive locking system to provide IP67 protection.  Designed for Industrial Ethernet and PROFINET applications, the connector family enables transmission of data and power signals directly to local devices. The Push-Pull is available in three versions

LISTED UNDER: Packaging & Interconnects

Sockets Suit 0.8 mm Pitch SDRAM

May 30, 2008 10:48 am | Ironwood Electronics, Inc. | Product Releases | Comments

Ironwood Electronics recently introduced a high performance BGA socket for 0.8 mm pitch SDRAM. The SG-BGA-6252 socket is designed for a 9 mm × 11 mm, 0.8 mm pitch 60-pin BGA package and SG-BGA-6253 socket is designed for a 9 mm × 13 mm, 0.8 mm pitch 84-pin BGA package. The sockets operate at

LISTED UNDER: Packaging & Interconnects

Solder Cup Interconnects Terminate Discrete Wires

May 30, 2008 10:15 am | Product Releases | Comments

Mill-Max offers a method to terminate discrete wires into a pluggable interconnect with its Solder Cup Headers and mating Socket Connectors. They provide a pluggable path between wired applications. Manufactured using precision-machined brass alloy and beryllium copper contact clips, then assembled in

LISTED UNDER: Packaging & Interconnects

PC/104 Connectors Suit Embedded PC Applications

May 23, 2008 6:10 am | Product Releases | Comments

Available with features such as a press-fit tail option to enable solder-free attachment, a PC/104-compatible range of bus connectors from Harwin for embedded PC applications come in stack-through and non stack-through versions. Configurations available include a 32 × 32 way part supporting 8-bit systems and

LISTED UNDER: Packaging & Interconnects

Interconnect Family Features Contacts to Reduce Broadside Coupling and Crosstalk

May 21, 2008 8:16 am | Product Releases | Comments

Samtec expanded its Board-to-Board and Cable-to-Board line featuring a rugged Edge Rate contact. These systems are designed for applications where signal integrity and durability are critical. The specially designed contacts are asserted to offer impedance matching, reduced broadside coupling and crosstalk, and high cycle life. Board level systems include the

LISTED UNDER: Packaging & Interconnects

Rugged Three-Row Connectors Offer Low Insertion Force

May 14, 2008 5:02 am | Product Releases | Comments

Offering up to 96 contacts, the Datamate M83 three-row connector from Harwin incorporates specially designed female contacts that require a mating force of only 0.2 to 1 N. The devices conform with BS 9525-F0033 and can incorporate mixed contact technologies including signal, power, and coax. Targeted at applications such as industrial control systems, head-up displays

LISTED UNDER: Packaging & Interconnects

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading