Advertisement

Interconnect Offers Obsolescence Solutions

June 18, 2008 7:44 am | Product Releases | Comments

Enabling footprint conversion adapters and offering obsolescence solutions, Interconnect Systems' FlexFrame, is a system of interconnects that offers flexible in configurations options including pin location and pitch, various standoff heights, and windows in the carrier that allow

LISTED UNDER: Packaging & Interconnects
Advertisement

Terminal Blocks minimize space and maximize connection

June 18, 2008 5:11 am | Product Releases | Comments

Providing space-saving connections for up to 10A the SPTA, an angled terminal block from Phoenix Contact, has push-in spring technology allowing solid and flexible wires with ferrules to be connected without the use of tools.  The terminal blocks provide

LISTED UNDER: Packaging & Interconnects

Boxes Feature Dual-Channel Gasket Construction

June 17, 2008 8:07 am | Product Releases | Comments

Featuring a dual-channel gasket, Bud Industries’ ANS Series die-cast NEMA boxes are made with a one-piece molded outer Silicone gasket and a wire-mesh with sponge rubber. The EMI/RFI-shielding devices meet NEMA 1, 2, 4, 4X, 12, 13, and IP65 ratings. The ADC-12 aluminum-alloy

LISTED UNDER: Packaging & Interconnects

Pin Connector Designed To Carry 20A Per Pin

June 17, 2008 6:41 am | Product Releases | Comments

Designed to carry 20A per pin, H11 DIN connectors from 2E Syscom, are available in standard 11-pin and half size five pin configurations. Female connectors are available with solder tail, spade terminal, screw-on terminal contacts, faston or screw terminations and

LISTED UNDER: Packaging & Interconnects

Power Terminal Block Splits High Power Inputs

June 17, 2008 6:15 am | Product Releases | Comments

Enabling users to split large gauge high power input into lower power, smaller gauge wire circuits, the Panel Power Distribution Terminal Block, Part OTP-80-03P, from BlockMaster Electronics is applicable for

LISTED UNDER: Packaging & Interconnects

Connector Groups Target MR Imaging Technology

June 16, 2008 12:43 pm | Product Releases | Comments

Focusing on MR Imaging technology, Johnson’s MMCX non-magnetic RF connectors provide a snap-on coupling design that are suitable for flex and array coils in MRI equipment for appendages. The Type-Ndevices are made from high purity copper alloys and deliver

LISTED UNDER: Packaging & Interconnects

Connector Performs at High Temperatures

June 16, 2008 6:01 am | Product Releases | Comments

Performing at temperatures from -40°C to +175°C, Cinch Connectors’ Dura-Con Micro-D connector family has an insulator in tooled sizes in 9-15-25-50-100-120 positions and a seven-point twist-pin design. The interconnects in these devices can handle over 50 G of shock (Mil-Std 1344, Method 2004, Condition E) and 20 G of vibration (Mil-Std 1344, Method 2005, Condition IV). The connectors are appropriate

LISTED UNDER: Packaging & Interconnects

Solderless Contact Switch Survives 3,000 Cycles

June 13, 2008 9:57 am | Product Releases | Comments

With a life cycle of 3,000 operations, ITT Interconnect Solutions' Universal Contact stamped contact uses pre-loading and anti-lift designs and comes with dome contact points and “side wings”. Addressing solderless component interconnection applications

LISTED UNDER: Packaging & Interconnects

Drum Heaters Include Thermostat

June 11, 2008 9:51 am | Product Releases | Comments

Giving off even heat to the contents within, Omega Engineering’s DRUM-DHW-55 Series of OMEGALUX drum heaters wrap around a 55-gallon drum and have a built in thermostat calibrated from 10 to 218°C. The spring-and-hook devices are resistant to mechanical damage and attack from many chemical substances. The drum heaters have a built-in electrically electrically-grounded metal screen and

LISTED UNDER: Packaging & Interconnects

Fans Offer Tachometer Output

June 11, 2008 5:23 am | Product Releases | Comments

Giving an engineer the ability to monitor and report rotational speed, Orion Fans’ DC fans trigger a  5-V TTL or an “open collector” alarm signal to indicate that they have stopped or slowed significantly. The UL/cUL- and TUV-approved devices have a 2 period-per-revolution square-wave frequency and can

LISTED UNDER: Packaging & Interconnects

Cooler System Maintains Positive Cabinet Pressure

June 10, 2008 12:17 pm | Product Releases | Comments

Utilizing a compressed air supply to operate, Vortecs' Vortex A/C not only cools electrical enclosures but also creates a positive cabinet pressure to seal out contaminants, while hot air is expelled through a relief valve. Operating within a range from 27° to 32°C, the device has dual vortex tube cooling units

LISTED UNDER: Packaging & Interconnects

Touch Screen Surface Contains Finger Print Resistant Film

June 10, 2008 7:01 am | Product Releases | Comments

Uni-Pixel, Inc.has developed a new thin film it calls Opcuity FPR (Finger Print Resistant) that can be applied to

LISTED UNDER: Packaging & Interconnects

ExpressCard-to-PXI Extension Kit Creates More PXI Slots

June 5, 2008 10:14 am | Product Releases | Comments

Consisting of the EC-8560 ExpressCard and PXI-8565 PXI card, the multi-slot ExpressCard-to-PXI extension system from ADLINK Technology provides additional PXI slots for a laptop via a shielded cable connection up to 23’ in length. PXI devices installed in the extension PXI do not

LISTED UNDER: Packaging & Interconnects

International-use Switchmode Adapter has Interchangeable Plugs

June 5, 2008 6:57 am | Product Releases | Comments

Ventronics' Series FRM 024 12W-24W switchmode power adapter meets CEC Regulations, Efficiency Level IV and has UL/CSA/CE approvals. The single-output devices have slide-on, interchangeable AC plugs for USA, EU, UK, and Australia. There are eight models available accepting from 90 to 264 VAC with outputs from 0.9 to 2.5 A at 3 to 27 VDC with features that include overload and short-circuit protection.

LISTED UNDER: Packaging & Interconnects

Push-Pull Plug Connectors Provide Protection

June 3, 2008 11:51 am | Product Releases | Comments

The new VARIOSUB Push-Pull plug connector system from Phoenix Contact has a plug-and-play positive locking system to provide IP67 protection.  Designed for Industrial Ethernet and PROFINET applications, the connector family enables transmission of data and power signals directly to local devices. The Push-Pull is available in three versions

LISTED UNDER: Packaging & Interconnects

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading