Advertisement

Springcon Terminal Blocks for Award Winning Designs

August 5, 2013 12:32 pm | METZ CONNECT USA Inc. | Products

•Faster Install: the plug can be held in the hand while doing the initial wiring then inserted into the pcb header. Eliminates awkward angles and poor lighting that can be a problem with fixed terminal blocks. •Faster Install: the spring clamp terminal needs only the wire to be stripped and inserted into terminal block. •Faster Install: the cantilevered lever needs low pressure from just a finger to terminate the wire. •End-User Friendly: spring clamp eliminates variation in quality of termination, unlike screw cage terminals which depend on the skill of the installer •End-User Friendly: no tools are needed

LISTED UNDER: Barrier Strip | Terminal Blocks
Advertisement

Cable designed to withstand temperature extremes from -65°C to 165°C

August 1, 2013 9:54 am | Cicoil Corp. | Product Releases | Comments

Cicoil is pleased to announce the introduction of its ultra-flexible FireWire Cable. Unlike typical FireWire cables, the Cicoil cable has been designed for high flexibility, mechanical stress, temperature extremes (-65°C to +165°C) and harsh environments. And the flat cable construction guarantees clear, high speed data transmission....

LISTED UNDER: Cable

Mono-pole connector designed for LED lighting applications

July 30, 2013 4:34 pm | Hirose Electric Usa | Product Releases | Comments

Hirose Electric has developed the DF59S Series, a mono-pole connector that is optimized for LED lighting applications. The board-to-board connectors feature a housing free receptacle that produces a slim fit and low profile when mated, making this an excellent connector for high density LED applications.

LISTED UNDER: High Voltage

Connectors simplify installation on high-performance coax cables

July 29, 2013 1:40 pm | Rf Industries | Product Releases | Comments

The RFN-1006-49I features a solderless captive pin and the RFN-1006-4I features a crimp pin. Both connectors are compatible for high performance cables such as Times Microwave LMR-400, CommScope CNT-400, Belden  9913, and RF Industries RFI-CU400.

LISTED UNDER: Cable

Valve dispenses flux for photovoltaics industry

July 12, 2013 1:18 pm | Nordson Efd Llc | Product Releases | Comments

Nordson EFD has developed a non-contact dispense valve for precision jetting of low viscosity flux onto solar cell bus bars. Operating at speeds up to 500Hz/sec, the Square Wave 745NC valve meets the photovoltaic industry's need to deposit continuous lines of microdots on the solder-coated metal ribbons that connect adjoining PV wafers.

LISTED UNDER: Accessories

Stamped spring pin features 19 gram actuation force per pin

July 11, 2013 3:23 pm | Ironwood Electronics, Inc. | Product Releases | Comments

Ironwood Electronics recently introduced a new LGA socket addressing high performance requirements for 2.54mm pitch devices - CBT-LGA-5002. The contactor is a stamped spring pin with 19 gram actuation force per pin and cycle life of 500,000 insertions.

LISTED UNDER: High Voltage

Fiber-optic terminus and adapter conforms to ARINC 801

July 11, 2013 3:07 pm | Positronic Industries, Inc. | Product Releases | Comments

Positronic is pleased to announce the release of a new fiber optic terminus and size 8 adapter for use in its popular Combo-D connector family. The terminus conforms to the performance criteria outlined in the ARINC 801 document, which is a widely accepted commercial aerospace standard for fiber optic termini on aircraft.

LISTED UNDER: Cable

Connectors designed for SSD, wireless cards, ultraportable devices

July 2, 2013 2:54 pm | Product Releases | Comments

TE Connectivity (TE) launched a line of M.2 next-generation form factor (NGFF) connectors, which are designed using the new interface standard for a smaller form factor in both size and volume. Engineered for a wide range of applications, including SSDs (solid state drives) and wireless cards of all types for use in notebooks, ultraportable devices, tablets, desktops and servers, TE’s M.2 (NGFF) products meet both current and future market needs for slim solutions

LISTED UNDER: Miniature

Inserts prevent accidental disconnection of plugs

June 24, 2013 1:22 pm | Tripp Lite | Product Releases | Comments

Tripp Lite has introduced PDU Plug-lock Inserts, a simple-to-use solution for preventing accidental disconnection of C20 and C14 plugs. IEC plugs are frequently loose-fitting and can be accidentally disconnected by even the slightest nudge or vibration, a likely event during routine network maintenance.

LISTED UNDER: IEC: Unfiltered

1-pole matrices include 2Amp current rating, up to 60W hot switch power

June 24, 2013 10:11 am | Pickering Interfaces | Product Releases | Comments

Pickering Interfaces has expanded its range of 2Amp 1-Pole matrices with releases that include the highest density solutions available in PXI large matrix (BRIC) format. The 40-596, 40-597, and 40-598 are all BRIC 1-pole matrices with 2Amp current rating, up to 60W hot switch power and 100VDC/70VAC voltage rating – depending on the configuration....

LISTED UNDER: High Voltage

Wire, vertical jumpers aim to extend functionality of select terminal blocks

June 21, 2013 10:29 am | Wago Corporation | Product Releases | Comments

New jumpers provide horizontal and vertical potential commoning for WAGO Corporation's Double-Deck TOPJOB S 2000 Series and X-COM S MINI 2020 Series DIN-rail terminal blocks. Users can vertically common both levels of a double-deck terminal block or multiply potential over several adjacent DIN-rail

LISTED UNDER: Terminal Blocks

Connectors equipped with solder bucket contacts for fast, efficient cable assembly

June 17, 2013 9:38 am | Harting, Inc. | Product Releases | Comments

HARTING is expanding its space-saving har-link metric product range by adding a version equipped with solder bucket contacts for fast, efficient cable assembly. This version is particularly effective in prototyping, development and small production runs. Based on 2.0 mm contact spacing, the har-link interface range offers compact, reliable, robust interface connectivity.

LISTED UNDER: Cable

Right angle Category 5E cable assemblies provide additional EMI protection

June 7, 2013 1:57 pm | L-Com Global Connectivity | Product Releases | Comments

L-com, Inc. has continued releasing new right angle Ethernet cable assembly lines with its new shielded right angle Cat 5e cable assemblies with low-smoke, zero halogen (LSZH) jackets. The new cables are expected to provide additional electro-magnetic interference (EMI) and radio frequency interference    

LISTED UNDER: Cable | Ethernet/Internet

Rugged connectors created for harsh environments

June 3, 2013 10:57 am | Product Releases | Comments

Molex Incorporated supports challenging industrial automation, aerospace and defence network connectivity with its compact Brad® Nano-Change® (M8) connectors.  The rugged Nano-Change product line offers the industry’s broadest selection of space-saving connectors, cordsets, receptacles, inserts, splitters and moulded junction boxes for sensor and actuator applications.

LISTED UNDER: Military

Flat cables ideal for critical automotive assembly plant applications

May 30, 2013 2:12 pm | Cicoil Corp. | Product Releases | Comments

Ideal for critical applications in automotive assembly plants, Cicoil’s highly durable Flexx-Sil Flat Cables are the optimal alternative to cumbersome round cables, unprotected wire harnesses and space consuming cable carriers. In addition, these highly flexible cables are designed to provide premium current carrying capacity....

LISTED UNDER: Flat Cable

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading