Hybrid cable solutions deliver low loss performance
May 1, 2012 11:16 am | Product Releases | CommentsCables Unlimited's OptiFlex hybrid cabling solutions are specified for wireless carriers updating their networks to 4G technologies, WiMAX, LTE, etc. because they deliver optimal low loss performance with less cost than standard tower configurations. Time and money is saved in several ways...
LISTED UNDER: Packaging & Interconnects
FPC connectors include 0.4 mm pitch and 0.9 mm height
May 1, 2012 11:07 am | Product Releases | CommentsFCI has expanded its family of flex connector products with the introduction of the SFGL series of ZIF-terminated FPC connectors. With 0.4mm pitch and 0.9mm height, the back flip-type actuator connector is ideal for use in tablet PCs. Additionally, the VLP series, an enhanced version of the previous SFVL series of FPC ZIF connectors, is also available now with 0.5mm pitch and 0.7mm height...
LISTED UNDER: Packaging & Interconnects
POD cable assemblies meet Telcordia GR-1435 environmental specifications
April 30, 2012 4:08 pm | Product Releases | CommentsMolex Incorporated has launched the VersaBeam family, which is focused on expanded-beam interconnects. The first product introduced under the VersaBeam name is the VersaBeam POD Cable Assemblies that provide a low-profile, expanded-beam, 12-fibre solution designed specifically to mate with Avago Technologies’ MicroPOD* and MiniPOD* parallel optic modules.
LISTED UNDER: Packaging & Interconnects
Dual block prevents water from entering cable core
April 30, 2012 2:21 pm | Product Releases | CommentsHendrix Wire & Cable announces its DUAL BLOCK product. This offering provides a dual water blocking capability on Hendrix primary, underground cable. Water is one of the enemies of long-life in primary cable, as water entering the cable core can lead to premature failure. Hendrix DUAL BLOCK helps prevent this from occurring.
LISTED UNDER: Packaging & Interconnects
Robust sub-rack suitable for the use in the carrier environment
April 30, 2012 9:46 am | Product Releases | CommentsWith the tBG II sub-rack tde – trans data elektronik presents a robust sub-rack suitable for the use in the carrier environment, industry cabling or structured cabling. Covering the scope of three rack units, the sub-rack divides high-fibre loose tube cables consisting of up to 144 fibre splices into 12 splice modules.
LISTED UNDER: Packaging & Interconnects
AC power adapter features 90-264 VAC universal input
April 30, 2012 9:29 am | Product Releases | CommentsTRUMPower features its new 5-6 watts TMW7-5 medical grade AC power adapter, which comes with a built-in standard type A USB socket or an output cable with a mini USB-B connector. In addition to the standard black color, the power adapters are now available in white color.
LISTED UNDER: Packaging & Interconnects
Interchangeable cup nozzles intended for universal equipment
April 27, 2012 9:32 am | Product Releases | CommentsCount On Tools has released a series of interchangeable cup nozzles for Universal Instruments’ Flexjet 2/3/Inline 7 (7 Spindle) equipment. The new nozzle series allows the user to purchase one nozzle base with multiple tips that can be changed out to accommodate a wide array of components with a single tool.
LISTED UNDER: Packaging & Interconnects
USB 2.0 transceiver series increases system versatility
April 27, 2012 9:18 am | Product Releases | CommentsAmerican Fibertek today announced that its new series of USB 2.0 transceivers is available for shipping. The USB 2.0 Series allows any USB 2.0 device to be transmitted through a fiber cable network and fulfill longer distance requirements. These distances will certify transmission of up to one (1) kilometer on a multimode fiber...
LISTED UNDER: Packaging & Interconnects
"Connector Saver" with stainless steel coupling nut reduces testing expense
April 25, 2012 9:31 am | Product Releases | Comments7-16 DIN connectors are large format 50 ohm interfaces designed for high power wireless telecommunications applications such as antennas, base stations, and satellite communications. Test ports are subject to minimal wear each time the connector interface is coupled and de-coupled. Contact pins and dielectrics can be damaged if connectors are misaligned during coupling.
LISTED UNDER: Packaging & Interconnects | Test & Measurement
Power jack line is panel mount and allows for flexibility
April 24, 2012 10:40 am | Product Releases | CommentsKycon added a high-current panel mount DC power jack option to their current series of power jacks. The expansion of the power jack line allows for design flexibility, with reliability in high-current and repetitive applications such as
LISTED UNDER: Packaging & Interconnects
Board-to-fine coaxial cable connectors have 0.4mm pitch, 1.5mm mated height
April 23, 2012 9:39 am | 3M Electronics Solutions Division | Product Releases | CommentsHirose has announced a new partnership with Micro Interconnects that will help design engineers specify and design in the DF36 board-to-fine coaxial cable connectors. The 0.4mm pitch, 1.5mm mated heightboard-to-fine coaxial cable connector for displays, instrumentation and high definition imaging applications...
LISTED UNDER: Packaging & Interconnects
Renco choke features magnetically shielded design
April 18, 2012 2:04 pm | Renco Electronics, Inc. | Product Releases | CommentsLate 2011 and early 2012 has seen Rockledge, Florida electronics manufacturer Renco Electronics showcase several items in the company’s vast line of component electronic products. The latest of these is the RL-8054, a shielded radial choke coil with stand-off capability.
LISTED UNDER: Packaging & Interconnects
Intelliconnect extends range of Triaxial connectors
April 13, 2012 10:02 am | Product Releases | CommentsIntelliconnect USA, LLC now offers an extended range of high-reliability Triaxial connectors to include various adaptors and bulkhead mount jacks for several different cable types. Two new families are now available; the TRB series bayonet connectors and the TRT series featuring a threaded coupling sleeve.
LISTED UNDER: Packaging & Interconnects
ODVA-compliant connectors designed for harsh environment applications
April 12, 2012 9:18 am | Product Releases | CommentsCONEC has developed rugged ODVA-compliant connectors specifically for harsh environment applications, such as WiMax, Long Term Evolution (LTE), and Remote Radio Heads using Fiber To The Antenna (FTTA) connectivity, which require rugged connector and cable assemblies suitable for outdoor use.
LISTED UNDER: Packaging & Interconnects
Precision 3.5 mm test adapters available in convenient kit
April 11, 2012 5:21 pm | Product Releases | CommentsThe P2RFA-4031-01 kit features three 3.5mm precision adapters for microwave and RF Use. They are housed in a compact, foam-lined, zippered case for convenience and protection of the components when not in use. These adapters and the RFA-4031-01 adapter kit have been added to the RF Connector product line...
LISTED UNDER: Packaging & Interconnects | RF & Microwave/Communications
