Advertisement

Red Chip for Projection and Automotive Applications

July 31, 2007 10:50 am | Osram Opto Semiconductors | Product Releases | Comments

OSRAM Opto Semiconductors announces its red 1 mm2 chip, featuring thin-film technology, with brightness values of more than 300 lm. It will be used in the company’s DRAGON and OSTAR LEDs, and it is targeted for applications in the projection and automotive sectors. The red chip has a power consumption of 6W, achieves 52 lm/W, and it features a wavelength of 615 nm from an operating current of 2A.

LISTED UNDER: Optoelectronics & Displays

Line Scan Camera with Scan Sensor Technology

July 31, 2007 10:37 am | Product Releases | Comments

DALSA Corp. announces its Spyder 3 CL line scan camera with camera link interface. Its responsivity addresses low lighting situations. At its core is dual line scan sensor technology that achieves responsivity and throughput of 80 Mega pixels per second. Dual line scan technology offers a clear performance benefit. This camera can be used for applications including glass edge inspection, general purpose web inspection, postal sorting, industrial metrology, pick-and-place applications, and medical and scientific imaging.

LISTED UNDER: Optoelectronics & Displays

Graphics Display Controller for Automotive TFT LCD Panels

July 31, 2007 10:33 am | Product Releases | Comments

Toshiba America Electronic Components, Inc. announces its TX4964FG system-on-chip (SoC) targeted at instrument-cluster applications ranging from back-up camera displays to full-size, reconfigurable instrument clusters. It drives and manages the small-size thin-film transistor (TFT) LCD panels increasingly found in instrument clusters in medium- to high-end automobiles. The device integrates the CPU, hardware-graphics engine, TFT LCD panel controller, digital-camera interface and frame-buffer memory in a compact 176-pin QFP package.

LISTED UNDER: Optoelectronics & Displays
Advertisement

VGA and XGA resolution TFT LCDs

July 31, 2007 10:10 am | Product Releases | Comments

Apollo Display Technologies has announced that it can furnish VGA and XGA resolution TFT LCDs backlit by LED rails that are addressable via the company’s standard PRISMA II industrial controller board to switch back and forth between day and night modes. These LCDs can be used in the full range of night vision imaging systems (NVIS) applications including displays in military aircraft cockpits, tanks, trucks, ground mobile applications, communications equipment and electronics.

LISTED UNDER: Optoelectronics & Displays

Bright Sunlight Visible RGB LEDs

July 31, 2007 10:07 am | Product Releases | Comments

LEDtronics introduces the RGB-1007-001, a low profile, four legs through-hole LED that offers full-spectrum red, green and blue LEDs (RGB LED). These discrete LEDs provide high performance and visibility in a compact size of 4.90 mm x 6.5 mm +0.15. The red, green and blue diodes emit high-intensity light in a viewing angle of 120°. The red diode's wavelength is 635 nm, the wavelength of the green diode is 520 nm and the blue operates at 470 nm.

LISTED UNDER: Optoelectronics & Displays

Eye-Safe Diode Lasers

July 31, 2007 10:00 am | Product Releases | Comments

Intense Ltd. announces its HPD Series 2400 1550 nm eye-safe laser diodes that are high peak power, 1550 nm pulsed lasers for use in distance measurement applications that require eye-safe laser sources. The lasers are available in source sizes of 150 µm and 380 µm, and they are designed to operate at pulse widths of less than 200 ns, duty cycles to 0.1 percent.

LISTED UNDER: Optoelectronics & Displays

Force-Based Touchscreen Surface Selection

July 31, 2007 9:56 am | Product Releases | Comments

QSI Corp. introduces InfiniTouch, a patent-pending Force Panel Technology that enables any semi-rigid material (metal, glass, wood, stone, ceramic, plastic, or any combination of these materials) to sense touch. It also solves the problems of how to handle the non-orthogonal nature of touches, how to adjust for the force variations during touch duration, and it provides a touch surface with the durability and reliability to meet the needs of diverse industries.

LISTED UNDER: Optoelectronics & Displays

100-Lumen LEDs Available in Volume Quantities

July 31, 2007 9:52 am | Product Releases | Comments

Cree, Inc. announces commercial availability of XLamp LEDs with minimum luminous flux of 100 lumens at 350 mA. They are said to be the first LEDs to be available in volume with this level of performance. They can deliver either 25 percent greater brightness with improved efficacy, or they can deliver up to 55 percent greater brightness at the same efficacy when compared to the previous generation of XLamp LEDs.

LISTED UNDER: Optoelectronics & Displays
Advertisement

High Speed Photocoupler

July 31, 2007 9:47 am | Product Releases | Comments

Toshiba America Electronic Components, Inc., introduces its 5V, 50 MegaBaud1 (MBd) TLP117 IC photocoupler for high speed digital transmission applications. It specifically addresses applications with isolation and switching speed requirements such as system I/O interfaces and factory automation networks. The device is an optically coupled isolator consisting of a gallium aluminum arsenide (GaAlAs) light-emitting diode and an integrated high-gain, high- speed photo detector.

LISTED UNDER: Optoelectronics & Displays

Ceramic-Substrate SMT LEDs with Heat-Dissipating Capabilities and Wide Angles of Light Emission

July 31, 2007 9:40 am | Product Releases | Comments

Lumex introduced KoolBrite SMT LEDs. They use the company’s ceramic substrate material, a unique epoxy lens, and a manufacturing process that can cast the lense directly onto the ceramic substrate. The LEDs are capable of withstanding wave soldering, while providing a useable operating life of 50,000 hours with no loss in light output levels. They virtually eliminate failures due to thermal junction deterioration. These LEDs are appropriate for applications including illumination or indication on PCBs, annunciator and control panels, telecom switches and central office equipment, and medical equipment.

LISTED UNDER: Optoelectronics & Displays

Multi-lamp Controller for CCFL Displays

July 31, 2007 9:33 am | Microsemi Corporation | Product Releases | Comments

Microsemi announced a high performance multi-lamp controller designed with features optimized for lighting the cold cathode fluorescent lamps used in large screen LCD TV applications. The LX6501 controller minimizes external components by fully integrating on-chip gate drivers having the capacity to drive N channel power MOSFETs on both the low and high sides of full bridge inverters. Input voltages can be as high as 27V. An on-chip regulator generates internal driver operating voltages that supply the output gate drive circuit.

LISTED UNDER: Optoelectronics & Displays

LED Series Available in White SMD Package

July 31, 2007 9:29 am | Osram Opto Semiconductors | Product Releases | Comments

OSRAM Opto Semiconductors is adding a white LED to its Golden Dragon ARGUS family. It combines proprietary ThinGaN (indium gallium nitride) technology for brightness and uniformity with the patented ARGUS lens -- specially designed for high efficiency backlighting and illumination -- and the company’s chip level conversion (CLC) technology. Each package contains one HBLED with a thin phosphor coating over the emission area, applied at the wafer level.

LISTED UNDER: Optoelectronics & Displays

Custom Multifunction LCD Backlight Assemblies

July 31, 2007 9:23 am | Product Releases | Comments

JKL Components enhanced its design and manufacturing capabilities for LCD backlight assemblies to meet demanding and stringent quality specifications for custom requirements. The company’s program for additional control technologies includes NVIS compatible green lamp phosphors, thermistors for temperature control, opto-sensors, wire-wrap heaters, as well as

LISTED UNDER: Optoelectronics & Displays

17¨ Touch Panel

July 31, 2007 9:16 am | Product Releases | Comments

Fujitsu Components America introduced a 17" (diagonal) product for the growing retail kiosk market. The four-wire, 17" model is the largest in the company’s standard resistive touch panel line. Other applications include desktop touch monitors, Point of Sale, and industrial controls. The panel features 82 percent transmissivity and an anti-glare treatment to enhance viewability in high ambient light.

LISTED UNDER: Optoelectronics & Displays

Standard, 4.3¨ High-Transparency Touch Panel

July 31, 2007 7:55 am | Product Releases | Comments

Fujitsu Components America expanded its resistive touch-panel offering with the introduction of a 4.3¨ (diagonal) film-glass panel for both finger and stylus-based applications. The four-wire device fits Sharp and NEC 4.3¨ LCDs commonly used in handheld applications including popular game devices, and fixed applications suitable for small LCD screens. Featuring 86 percent transmissivity for viewing in high ambient light conditions, the design incorporates a double-layer PET film with 5 percent haze anti-glare hardcoat for durability  in both finger and stylus input modes.

LISTED UNDER: Optoelectronics & Displays

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading