Advertisement

WQVGA TFT Uses FPC Flex Interconnect

December 1, 2008 8:32 am | Product Releases | Comments

Offering 480 × 272 resolution and 24-bit color, OSD Displays’ OSD43FNKD222 4.3” WQVGA TFT utilizes a single FPC flex interconnect for a touchscreen interface, LED backlight power supply, and data display. The white LED backlight is rated for a minimum service life of 20,000 hours with a typical power requirement of 317 mW. The initial brightness of the four-wire resistive touchscreen is typically 220 cd/m². The product offers an overall size of 105.50 mm ×

LISTED UNDER: Optoelectronics & Displays

LED Light Tubes Exhibit High Brightness

December 1, 2008 5:21 am | Product Releases | Comments

Presenting input between 9.5 W and 24 W, GlacialLight’s LED-T8 LED light tubes demonstrate a brightness range from 480 lm at a flux of 60 lm/W to 2,560 lm at a flux of 80 lm/W. The products offer input voltages from 90 VAC to 240 VAC, power consumption from 9 W to 24 W, lengths from

LISTED UNDER: Optoelectronics & Displays

Machine-Vision Camera Supports GigE Protocols

December 1, 2008 4:34 am | Product Releases | Comments

Comprised of five monochrome and four color models, GiantDragon Gigabit Ethernet (GigE) machine vision cameras from Toshiba Teli leverages the AIA GigE Vision open standard to deliver high-bandwidth streams of non-compressed data over CAT-5e and CAT-6 cables without specialized interface hardware or frame grabbers.

LISTED UNDER: Computer Peripherals & Networking Devices | Optoelectronics & Displays
Advertisement

White OLED Illuminator Achieves Energy-Star Color Rating for Solid-State Lighting

November 29, 2008 7:04 am | Osram Opto Semiconductors | Product Releases | Comments

This achievement not only speeds us forward in the development of real-world solid-state lighting, it demonstrates that LED-based tech is not the only game in town.Delivering a light yield of over 60 lumens/watt, an organic light-emitting diode (OLED) white light emitter from BASF and Osram Opto Semiconductors also meets international Energy Star SSL Standard with regard to color requirements.

LISTED UNDER: Optoelectronics & Displays

LED Lamps Integrate Dimmable Driver

November 25, 2008 11:01 am | Product Releases | Comments

Building around the Cree XLamp, Infinilux’s MR16 Series 2-W LED lamps incorporate a dimmable driver accepting variable inputs from 8 VAC or 8 VDC to 16 VAC or 16 VDC. The units utilize the Infinilux thermal management system (ITMS) with an engineered heatsink and a convection scheme, and offer 3,300 K CCT warm white, 4,500 K CCT neutral white, and

LISTED UNDER: Optoelectronics & Displays

LEDs Offer Wide Viewing Angle

November 24, 2008 8:00 am | Product Releases | Comments

Adding to the PLCC-4 Series, Avago Technologies’ ASMT-QxBB Series 0.5-W SMT LEDs display a viewing angle of 120° in automotive and electronic sign applications. The RoHS-compliant components exhibit mid-power intensity brightness with optimum flux performance using InGaN chip technology, as well as optical efficiencies of 48 lm/W (cool white) and 43 lm/W (warm white). The Pb-free devices demonstrate a junction temperature of 125°C, thermal resistance of

LISTED UNDER: Optoelectronics & Displays

MultiLEDs Target Hi-res Video Displays

November 21, 2008 5:25 am | Product Releases | Comments

With a typical luminance of 2,000-cd/m² and a pixel spacing of 5-mm to 7-mm, two MultiLEDs for LED video displays from OSRAM Opto are targeted at high resolution video display applications that require high brightness and high color fidelity from all viewing angles. The white point for the new MultiLED in the white package is at 2,000-mcd

LISTED UNDER: Optoelectronics & Displays

SSLDs Offer Current Control Options

November 20, 2008 8:53 am | Product Releases | Comments

Designed for larger LCD screens in reduced feature set cell phones and portable systems, AnalogicTech’s AAT3104 and AAT3195 four-channel charge pump-based SSLDs exhibit 16-step, 32-step, or PWM current control. The components drive up to 4 LEDs at up to 30 mA each with LED output current accuracy of ±10% and LED output current matching of

LISTED UNDER: Optoelectronics & Displays
Advertisement

Cameras Present 20 µm Row Spacing

November 19, 2008 11:09 am | Product Releases | Comments

Targeting the color line scan camera market, e2v’s 4S and 3V 4,096-pixel EliiXA monochrome cameras exhibit row spacing of 20 µm center-to-center. The 18-kHz 4S device offers a sensor with 4 sensitive lines, with a “one-line-blind-spot” between each, and an overall scene area that is 7 lines in height. The 3V model grabs scenes running at 54 kHz with the multi-line sensor operating

LISTED UNDER: Optoelectronics & Displays

Optocouplers Decrease Standby Power

November 18, 2008 11:21 am | Fairchild Semiconductor | Product Releases | Comments

Meeting 1-Watt Initiative and ENERGY STAR regulations, Fairchild Semiconductor’s FOD410, FOD4108, FOD4116, and FOD4118 series of snubberless TRIAC driver optocouplers lowers standby power by up to 2 W. The 6-pin DIP-packaged devices present on-state current of 300 mA, zero-voltage crossing, and static dv/dt of 10,000 V/µs, and couple an infrared emitting diode and a hybrid triac formed with 2 inverse parallel SCRs. The FOD4116 and

LISTED UNDER: Optoelectronics & Displays

Oval LEDs Use Optically-Matched Radiation Patterns

November 18, 2008 8:05 am | Product Releases | Comments

Enhancing image quality for digital billboard and full-color sign applications, Cree’s C4SMF-RGS/GJS/BJS and C5SMF-RGS/GJS/BJS Screen Master oval LEDs employ optically-matched radiation patterns in blue, green, and red. The red pattern is located inside of the blue and green, resulting in a blended cool-white light. The 4- and 5-mm lights are available in a wide

LISTED UNDER: Optoelectronics & Displays

White SSLD Handles 150 mA

November 17, 2008 8:02 am | Product Releases | Comments

Exhibiting current-mode buck/boost DC/DC control, ROHM Electronics’ BD8113EFV-E2 dual-channel white SSLD drives up to 150 mA of constant current per channel. The Pb-free HTSSOP-B24-packaged component offers a maximum input voltage of 36 V, a supply voltage range from 5 V to 30 V, and an operating temperature range from -40°C to 105°C. The driver presents

LISTED UNDER: Optoelectronics & Displays

Cameras Employ CCD Sensors

November 14, 2008 10:58 am | Product Releases | Comments

Coming with a C-mount lens mount with adjustable back focus, Prosilica’s GE1910 and GE1660 HD resolution cameras use Kodak KAI-02150 2/3” optical-format progressive scan CCD sensors. The GE1910 runs at 30 fps at 1920 × 1080 resolution, while the GE1660 function at 34 fps at full resolution. The devices have a GigE Vision-compliant GigE interface that enables them to virtually

LISTED UNDER: Optoelectronics & Displays

Engineering Kit Assists in LED Lighting

November 13, 2008 8:25 am | Osram Opto Semiconductors | Product Releases | Comments

Including an OSTAR LED and components from LED Light for You (LLFY) partners, OSRAM Opto Semiconductors’ LED Engineering Kit helps users gain practical knowledge of LED lighting. The product also consists of 2 reflectors from Fraen with medium and narrow beam angles, and 3 lenses from Ledil (a wide-angle lens, a spot lens, and a cat’s eye for side deflection). The kit contains

LISTED UNDER: Optoelectronics & Displays

PoE PD Controller Powers LCD Display

November 12, 2008 4:50 am | Product Releases | Comments

Akros Semiconductor, Hall A4 Booth 242 at electronica, demonstrates its AS1135 Power over Ethernet (PoE) Powered Device (PD) controller implemented into a communication board driving the PoE-powered 22-W LCD display above it (see photo). The component implements the 2-Event Physical Layer

LISTED UNDER: Optoelectronics & Displays

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading