Advertisement
Converter

Browse: Converter

Forty-Watt radiation-hardened 120-V Input DC/DC converters target satellite power systems

July 15, 2014 4:42 pm | International Rectifier | Product Releases | Comments

International Rectifier, IR (El Segundo, CA) announced the introduction of the M3G120 Series of 40-W radiation-hardened (RAD-Hard) 120V input DC/DC converters for a wide range of digital and analog satellite power systems requiring up to 15 years or more of mission life.

LISTED UNDER: Converter

Configurable, flexible data converter can replace 20 discrete chips

June 17, 2014 10:48 am | Maxim Integrated Products, Inc. | Product Releases | Comments

Maxim Integrated Products’ San Jose, CA) MAX11300 allows engineers to mix and match 20 ADCs, 20 DACs or 20 High voltage digital I/O pins in any order. This configurable 20-channel, -10-V to +10-V high-voltage mixed-signal data converter is suited for…

LISTED UNDER: A/D | D/A

16-bit voltage output digital-to-analog converter configurable up to ±10V

June 17, 2014 9:46 am | Linear Technology Corporation | Product Releases | Comments

Linear Technology Corporation (Milpitas, CA) introduces the LTC2668-16, a 16-channel, 16-bit voltage output digital-to-analog converter (DAC) with SoftSpan outputs, each of which can be independently configured for one of five selectable unipolar and bipolar output ranges up to ±10V....

LISTED UNDER: D/A
Advertisement

Quad IF digital-to-analog data converter is presented as the industry’s fastest

May 29, 2014 10:39 am | Product Releases | Comments

Analog Devices, Inc. (Norwood, MA) introduced what it says is the industry’s fastest quad IF D/A converter. The AD9144 4-channel, 16-bit, 2.8-GSPS D/A converter supports high data rates and ultra-wide signal bandwidth enabling emerging wideband and multiband wireless applications.

LISTED UNDER: D/A

Digital to analog converters offer increased accuracy

May 8, 2014 9:54 am | Texas Instruments | Product Releases | Comments

Texas Instruments (TI) (Dallas, TX) introduced a new family of digital-to-analog converters (DACs) that enables engineers to increase the accuracy and performance of programmable logic controller (PLC) I/O modules, field sensors and transmitters, and building automation systems, while decreasing overall system size and cost.

LISTED UNDER: D/A

ADCs are hermetically sealed

March 25, 2014 10:00 am | Murata Power Solutions Inc. | Product Releases | Comments

The DATEL Business Unit of Murata Power Solutions (Mansfield, MA) has introduced its ADS-1011 series of analog-to-digital converters with 10-bit resolution and are housed in a 24-pin LCC hermetically sealed ceramic package. Each unit features

LISTED UNDER: A/D

Buck converter features 12µA quiescent current

February 4, 2014 11:37 am | Linear Technology Corporation | Product Releases | Comments

Linear Technology (Milpitas, CA) announces the LTC3638, a 140V input-capable high efficiency buck converter that delivers up to 250mA of continuous output current. It operates from an input voltage range of 4V to 140V, making it ideal for telecom, industrial, avionic and automotive applications.

LISTED UNDER: A/D

Automotive DC-DC converter enables fast and reliable charging for portable devices

October 22, 2013 1:57 pm | Product Releases | Comments

Recognizing and then charging any portable device (PD) directly from a vehicle battery can now be done over USB with a single IC, the MAX16984 automotive DC-DC converter with USB charge emulator from Maxim Integrated Products. Previously, PDs like smartphones and tablets could not charge reliably from OEM stock USB ports in vehicles.

LISTED UNDER: D/A
Advertisement

Inductance-to-digital converter is presented as industry’s first for position and motion sensing

October 10, 2013 10:28 am | Texas Instruments | Product Releases | Comments

Texas Instruments unveiled what it asserts is the industry’s first inductance-to-digital converter (LDC), a data converter category that uses coils and springs as inductive sensors. This contactless sensing technology can be used to measure the position, motion, or composition of a metal or conductive

LISTED UNDER: A/D

Kit promises everything needed to fully evaluate high-speed data converters

March 15, 2013 10:55 am | Texas Instruments | Product Releases | Comments

Texas Instruments introduced what is said to be the industry's first complete high-speed data converter system evaluation kit (HSDC-SEK). The HSDC-SEK-10 includes a pattern capture card, pattern generator card, low-jitter clock source, clean 10-MHz signal source and a multi-output regulated power supply.

LISTED UNDER: Development | A/D | D/A

FPGA mezzanine card rapid prototyping kit aids JESD204B-compatible ADC-to-FPGA connectivity

February 26, 2013 7:41 pm | Analog Devices, Inc. | Product Releases | Comments

Analog Device added to its line of FPGA development platform-compatible FPGA mezzanine cards (FMC) incorporating JEDEC JESD204B SerDes (serializer/de-serializer) technology. Digital and analog designers can use the AD9250-FMC-250EBZ kit to simplify and rapidly prototype high-speed JESD204B A/D converter-to-FPGA platforms.

LISTED UNDER: Development | A/D

Analog-to-digital converter offers four user-programmable operating modes

February 12, 2013 9:52 am | Product Releases | Comments

Touchstone Semiconductor announced the immediate availability of the TS7001, its newest 12-bit 187.5-ksps analog-to-digital converter (ADC) that can be used as a 1.5x faster/50% lower INL drop-in upgrade to the Analog Devices AD7887A. The TS7001 is a 50% smaller footprint and is also 1.5x faster versus the high-grade AD7887B in an SOIC-8.

LISTED UNDER: A/D

HGMM simplifies AC-DC power supply designs

January 11, 2013 11:47 am | Gaia Converters | Product Releases | Comments

Need an Avionic AC-DC power supply? Look no further, Gaia Converter the High Rel Power modules specialist, has extended its HGMM AC-DC Front-end module offering with the 150W ½ brick. For all power needs from 35 to 350W or more, Gaia Converter’s state of the art  35W, 150W & 350W PFC modules comply with with the latests standards DO-160E, ABD100, AMD-24, or MIL-STD-704F.

LISTED UNDER: A/D

Analog-to-digital converter can be used as a drop-in replacement for the Analog Devices AD7887

December 7, 2012 9:22 am | Product Releases | Comments

Touchstone Semiconductor announced the immediate availability of the TSA7887, its first Analog Devices alternate source IC. The new TSA7887 is a two-channel, 12-bit, 125-ksps analog-to-digital converter (ADC) that can be used as a drop-in replacement for the Analog Devices AD7887.

LISTED UNDER: A/D

12-bit, 125-ksps ADC targets low-power, industrial, process control apps

December 5, 2012 4:31 pm | Product Releases | Comments

Touchstone Semiconductor  announced the immediate availability of the TSA7887, a two-channel, 12-bit, 125-ksps analog-to-digital converter (ADC) that can be used as a drop-in replacement for the Analog Devices AD7887. Priced at $1.25 in 1,000-piece quantities, the new IC offers

LISTED UNDER: A/D
X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading