Advertisement
Enclosures

UV-stable handheld enclosures suit outdoor electronics

July 23, 2014 10:19 am | Okw Enclosures | Product Releases | Comments

OKW (Bridgeville, PA) has launched DATEC-COMPACT, a brand new range of UV-stable IP65 (NEMA 4) handheld enclosures for outdoor electronics. These modern and ergonomic cases are the first from OKW to feature integrated contacts as an option – providing…

LISTED UNDER: Enclosures & Backplanes | Enclosures
Advertisement

2014 IMPACT Award Winner: OKW Enclosures wins for Enclosures

May 22, 2014 1:54 pm | Okw Enclosures | Product Releases | Comments

OKWs SOFT-CASE series of hand held enclosures is now available from stock molded in BIOGRADE bioplastic material. For most applications, this bioplastic material can be used instead of the fossil plastics, such as ABS, which were used until now. Features include ...

LISTED UNDER: Shielded

Enclosure delivers a certified static load rating of 5,400 lbs.

April 11, 2014 3:28 pm | Product Releases | Comments

AMCO Enclosures (Des Plaines, IL) has just released its new TITAN EP enclosure for electronic packaging. The TITAN EP frame features fully welded construction, which delivers a certified static load rating of 5,400 lbs. and a certified dynamic load rating of 3,300 lbs....

LISTED UNDER: Shielded

IP67 box enclosure seals out water and dust in extreme conditions

March 27, 2014 3:34 pm | Bud Industries, Inc. | Product Releases | Comments

Bud Industries (Cleveland, OH) has introduced its PIP Series IP67 box, which provides waterproof protection of electronics for approximately 10% less than competing enclosures. The new enclosure is made from a material that offers improved rigidity and tighter tolerances....

LISTED UNDER: Shielded

Enclosure gaskets exhibit excellent shielding effectiveness over a broad frequency range

February 26, 2014 4:45 pm | Leader Tech Inc. | Product Releases | Comments

Leader Tech (Tampa, FL) beryllium-copper fingerstock gaskets are an ideal choice for making reliable electrical contact between parallel seams (mating surfaces) that are created by enclosure access doors and panels. Features include hundreds of easy-to-install styles and sizes to accommodate thousands of enclosure applications.

LISTED UNDER: Shielded

DIN rail enclosures available in 2, 3, 4, 6, 9, and 12 modules sizes

February 5, 2014 12:29 pm | Okw Enclosures | Product Releases | Comments

OKW has added a new 3 modules size to its popular RAILTEC-B range of DIN rail enclosures. RAILTEC-B is now available in 2, 3, 4, 6, 9 and 12 modules sizes. Features include suitability for a range of applications, notably machine-building and automation.

LISTED UNDER: Metal

Design-specific enclosures intended for credit-card sized computers

November 25, 2013 9:31 am | Hammond | Product Releases | Comments

Hammond Manufacturing has launched a range of design-specific moulded enclosures to support the new types of credit card-sized, low-cost bar- board computers, which, typically running Linux, provide basic functionality across a wide range of applications.

LISTED UNDER: Shielded

Optical backplane interconnect system supports VITA 66.1 standard

November 5, 2013 3:19 pm | Product Releases | Comments

TE Connectivity announces the new VITA 66.1 Ruggedized Optical Backplane interconnect system that has been designed to meet the needs of high-bandwidth applications such as for high-definition video and images and more specifically for computing applications requiring optical infrastructure.

LISTED UNDER: Metal

Surface-mount enclosure coin cell contacts require minimal board space

November 5, 2013 1:28 pm | Keystone Electronics Corp. | Product Releases | Comments

Keystone Electronics has introduced its latest line of surface mount enclosure coin cell contacts. These new contacts provide a cost effective, dependable connection for coin cell batteries in self-contained battery compartments. These contacts require minimal board space and allow easy access for installation and removal of a coin cell battery within a battery enclosure.

LISTED UNDER: Metal

Nineteen-inch instrument enclosures accommodate 3U equipment

September 20, 2013 9:12 am | Product Releases | Comments

INSTRUMET is the latest range of 19” instrument enclosures from METCASE. These lightweight cases conform to DIN 41494 and IEC 297-1 standards for 19” equipment. The enclosures are designed to accept standard 3U subracks and chassis, and are available in three sizes: 3U x 10.5” x 13.77”, 3U x 19” x 13.77” and

LISTED UNDER: Instrument | Metal

Flat rod system eliminates flexing, pry points, and rattle

August 27, 2013 3:50 pm | Southco, Inc. | Product Releases | Comments

Southco recently introduced the A5 Multi-Point Flat Rod System, which offers increased strength when controlling multiple latch points from a single point of operation. The flat design provides an economical solution and added security in enclosure applications with longer doors and panels, eliminating flexing, pry points and rattle.

LISTED UNDER: Metal

Metal enclosures designed for wall or bulkhead mounting

July 29, 2013 2:29 pm | Hammond | Product Releases | Comments

Hammond Manufacturing has introduced its new HJ  H Series, a family of hinged cover metal enclosures, environmentally sealed to NEMA Type 3R, 4 (IP66), 12 and 13. Designed for wall or bulkhead mounting, the HJ  H Series is ideal for housing electrical and electronic equipment....

LISTED UNDER: Metal

Adhesive vent extends life of outdoor electronic enclosures

July 22, 2013 12:25 pm | W.L. Gore & Associates | Product Releases | Comments

W. L. Gore & Associates has expanded its line of GORE Protective Vents with a new product specifically engineered to increase the reliability of outdoor electronic enclosures that are commonly exposed to changing weather and environmental conditions.

LISTED UNDER: Atmospheric

New option for thermoelectrically cooled electronic enclosures makes washdowns fast and easy

June 10, 2013 1:26 pm | Product Releases | Comments

EIC Solutions has announced the new M74 clean out modification option which facilitates washdown of thermoelectric coolers mounted to electronic enclosures. The M74 option was application-driven arising from suggestions received from customers in food processing, and other process industries requiring frequent rinsing or washing of equipment.

LISTED UNDER: Heat Pips Thermal Gap Pads Materials and Substrates | Metal

Waterproof electronic enclosure family adds four new sizes

May 15, 2013 4:05 pm | Polycase | Product Releases | Comments

Polycase’s NEMA 4X rated WA, WC and WP Series of waterproof electronic enclosures has expanded to include four new enclosure sizes. Ranging from 2.28” x 2.52” to 14.12” x 7.84”, the plastic enclosures now host 17 different size options. The WA, WC, and WP Series are UL listed to UL508-4X and meet

LISTED UNDER: Metal

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading