Surface Mount Tactile Switches Offer Gull Wing or J-lead Termination

March 5, 2008 6:56 am | Product Releases | Comments

The CIT Relay & Switch CS3304 Series is a momentary surface mount tactile switch. Offering gull wing or J-lead termination, this 6.2 mm2 tactile switch has two actuator lengths 2.6 mm and 3.4 mm. The device has a tested electrical life of 100,000 cycles with electrical rating of 50 mA at 48V DC. Contact resistance is

LISTED UNDER: Electromechanical/Mechanical Devices

Power Rocker Switch for Industrial and Commercial Applications

March 5, 2008 5:05 am | Product Releases | Comments

Tyco Electronics Corp. introduced its PRC series of power rocker switches for snap-in panel mounting. The series is IP66 rated for protection against dust and liquids. PRC power rocker switches are suitable for applications in industrial machinery, vacuum cleaners, HVAC equipment, power tools, power supplies, audio equipment and fitness equipment. They are rated for 20A/125V AC or 10A/250V AC.

LISTED UNDER: Electromechanical/Mechanical Devices

PTC High Power Heaters Offer Compact Heating

March 5, 2008 4:58 am | Product Releases | Comments

Spectrum Sensors and Controls introduced its high power, compact heater that uses ceramic PTC technology to act as the heating element. The PTC thermistors in this heater are self-regulating elements that can operate at a nearly constant temperature over a range of voltage and environmental conditions. The heaters offer high power density in a compact design that can accommodate an array of PTC thermistor elements.

LISTED UNDER: Electromechanical/Mechanical Devices

Control Switch is Fully Sealed to IP68 Spec

March 5, 2008 4:53 am | Product Releases | Comments

APEM Components, Inc. announced its MT series environmentally sealed toggle switch that functions as a rotary or rocker switch. The series is activated using a slight rocking motion by an operator’s finger or thumb, and it is recommended for applications requiring a sealed, ergonomic electrical interface such as radio remote controls, metal detectors and other portable, hand-held devices.

LISTED UNDER: Electromechanical/Mechanical Devices

Micro-actuator Module Line Adds Smaller, Lower Power Device

February 20, 2008 9:00 am | Product Releases | Comments

New Scale Technologies added a smaller, lower-power module to its SQL-M line of SQUIGGLE micro-actuator modules. Each module incorporates a piezoelectric SQUIGGLE motor - claimed to be the world’s smallest linear motor – with optical limit switches in a compact polymer housing. The new SQL-M-1.8 micro-actuator module measures

LISTED UNDER: Electromechanical/Mechanical Devices

Incremental Encoders Available In Blind Hollow Shaft Versions

February 13, 2008 5:21 am | Product Releases | Comments

SICK STEGMANN’s DFS 60 Incremental Encoders are available in blind hollow shaft versions. These blind hollow shaft encoders are designed to reduce the potential for contamination, making them suitable for use in dirty or dusty environments with water washdown cleansing. DFS60 blind hollow shaft encoders deliver from 1 to 65,536 ppr with reliable operation

LISTED UNDER: Electromechanical/Mechanical Devices | Sensors & Actuators

Micro-miniature Relay with 2.5 kV Surge Strength

February 12, 2008 6:44 am | Product Releases | Comments

CIT Relay & Switch introduced its J860 Series monostable, high dielectric relay with 2.5 kV surge strength that conforms to FCC Part 68. The J860 is DPDT with coil voltage choices of 3V, 4.5V, 12V and 24V DC. This relay measures in at 15.0 mm × 7.5mm × 9.5 mm. The relay is UL/CUL recognized and RoHS compliant, featuring cadmium-free contacts.

LISTED UNDER: Electromechanical/Mechanical Devices

Thermal Management Device Utilizes Conductive Nitride Chip

February 11, 2008 5:04 am | Product Releases | Comments

International Manufacturing Services, Inc. (IMS) introduced the B-Series Therma-Bridge thermal management device. It uses a thermally conductive Aluminum Nitride chip with metalized terminals to transport heat from one location to another, enhancing overall board performance.

LISTED UNDER: Electromechanical/Mechanical Devices

Black Anodized Aluminum Lighted Pushbutton Switch

January 24, 2008 4:28 am | Product Releases | Comments

CIT RELAY & SWITCH offers the CH Series LED illuminated pushbutton switch with a new black anodized aluminum body and actuator. Functions include momentary or alternate action in SPDT or DPDT configurations. Illumination includes center dot or ring illumination feature red, yellow, green, blue, white and orange LED voltages, inclusive of 6V DC up to 220V AC. This vandal and water resistance switch offers panel cutout of 16 mm

LISTED UNDER: Electromechanical/Mechanical Devices

Coaxial Solid-State PIN Diode Switches with Desirable Isolation

January 18, 2008 6:02 am | Keysight Technologies | Product Releases | Comments

Agilent Technologies Inc. introduced a family of coaxial solid-state PIN diode switches -- including the P9400A/C transfer, P9402A/C SPDT and P9404A/C SP4T switches -- with a broad operating frequency range from 100 MHz up to 18 GHz for fast, accurate test in automatic test equipment (ATE) systems. Desirable isolation and ultra-fast switching speed make these switches suited for R&D and manufacturing engineers designing manufacturing test systems or requiring a fast switching solution to validate component performance.

LISTED UNDER: Electromechanical/Mechanical Devices

Modular Pushbutton Switch Series Offers Many Illumination Options

January 16, 2008 6:12 am | Product Releases | Comments

E-Switch announced its modular MDP-16 Series of illuminated pushbutton switches. Its modular interface design features an attractive front panel and many illumination options. Actuator styles include a low or high bezel, and a flush mount or full guard option. There are six actuator colors to choose from. Specifications include electrical life of 6,000 cycles both silver and gold; mechanical life of 50,000 cycles typical; contact rating is

LISTED UNDER: Electromechanical/Mechanical Devices

Bi-Color Lighted Pushbutton Switch with Laser Etching Cap Options

January 16, 2008 5:10 am | Product Releases | Comments

CIT RELAY & SWITCH offers the LPH Series bi-color, lighted pushbutton switch with numerous new cap options. Available with DPDT or 4PDT switch function, this versatile switch offers both momentary and latching styles. The LED color options available are red, green, yellow and blue – simply choose one or two colors for your application. Design engineers can choose the switch without a cap, a clear cap in two sizes or a misty silver style with 10 laser etching options.

LISTED UNDER: Electromechanical/Mechanical Devices

High Electrical Rating Slide Switches include Single and Double Pole Options

January 14, 2008 6:28 am | Product Releases | Comments

Phaseda introduced its power slide switch series. This XN-series slide switches have many function options, including single pole and double pole, 2 to 4 positions. Terminals are solder lug, PC through-hole type. The UL approved electrical rating is up to 16A 125V AC; and the whole series is fully compliant with European RoHS

LISTED UNDER: Electromechanical/Mechanical Devices

Illuminated Surface Mount Tactile Switch for Reset Applications

January 7, 2008 11:10 am | Product Releases | Comments

C&K Components introduced its K5AT Series of compact top-actuated illuminated tactile switches. The surface mount switches feature an integrated LED as part of their overall robust design. Measuring 8.0 mm × 8.4 mm × 6.1 mm, the series is suitable for applications such as telecom and network infrastructure, server and storage reset buttons, as well as medical monitoring equipment and other industrial electronic panels.

LISTED UNDER: Electromechanical/Mechanical Devices

Two-Phase Microstepping Motor and Driver Package Reduces Noise

January 7, 2008 10:59 am | Product Releases | Comments

Oriental Motor USA Corp. introduced its CMK Series two-phase step motor and microstepping driver packages. This RoHS compliant series combines a compact, lightweight microstep driver (0.11 pounds) with either a 0.9 degree-per-step or a 1.8 degree-per-step two-phase hybrid step motor. The 24V DC board level driver is able to divide the two-phase motor’s basic step angle of 1.8 degree-per-step

LISTED UNDER: Electromechanical/Mechanical Devices


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.