Advertisement

Power Rocker Switch Is Waterproof

June 18, 2008 8:01 am | Product Releases | Comments

Providing protection against dust and water up to IP55, without external PVC cap, the KND-2 Series from Phaseda, utilizes a unique internal design to comply.  The weather proof power rocker switch snaps into industry standard panel cut-out size 0.862 x 1.169” (22 x 30mm) and contains

LISTED UNDER: Electromechanical/Mechanical Devices

8-Axis Motion Controller Incorporates Servo Drive

June 13, 2008 6:59 am | Product Releases | Comments

Designed to address advanced automation applications, Technosoft’s TMC-3D 8-axis motion controller includes a digital servo drive to control up to 8 Technosoft intelligent drives (including itself) via CAN-bus

LISTED UNDER: Electromechanical/Mechanical Devices

Fan Controller Accepts I2C Commands

June 12, 2008 8:25 am | Product Releases | Comments

Able to drive 4-wire DC fans and blowers, Control Resources’ SmartFan Cirrus-6 fan speed controller accepts commands from a custom or an I2C interface. The controller handles tach pulses from 6, 12, 24, or 48 VDC fans

LISTED UNDER: Electromechanical/Mechanical Devices
Advertisement

SPDT Relay Handles High Currents

May 27, 2008 5:57 am | Product Releases | Comments

Using stronger contacts and internal improvements on the armature, Hasco’s HAT 900 series relays are rated for 30 A on the N.O. side and 30 amps on the N.C. Presented as highest rated relay in this pin configuration for AC, relays are available with ratings such as 12, 24, 48, 110, 120, 220, 240 and 277 VAC. (DC coils are also available.)

LISTED UNDER: Electromechanical/Mechanical Devices

Motor Control Kits Include Optimized DSP Source Code

April 24, 2008 6:42 am | Product Releases | Comments

Based on Texas Instrument's TMS320F28335 floating-point digital signal controller, the Technosoft MCK28335 Motor Control Kit include source code and MATLAB libraries to provide a complete motion control development and evaluation package. Both BL (brushless) and IM (induction) kit versions complete C language source code, including a MATLAB motion library, complete DSP source code

LISTED UNDER: Electromechanical/Mechanical Devices

Miniature Servo Drive Integrates High Power Density

April 21, 2008 11:59 am | Product Releases | Comments

Elmo Motion Control added the Solo Whistle to its family of servo drives. This ready-to-use integrated device is designed to connect the company's Whistle Servo Drive directly to the application. The solution consists of the Whistle plus a connection interface which either eliminates or reduces

LISTED UNDER: Electromechanical/Mechanical Devices

Tiny Detect Switch Serves Mezzanine-Card Applications

April 17, 2008 8:52 am | Product Releases | Comments

Designed for side- and top-actuation with a board height of 3.5 mm, the HDT Series detect switch is suitable for use in Advanced Mezzanine Card (AMC) applications. Features include an operational life of 100,000 cycles with a maximum actuation force of 35 gm, a pre-travel of 0.30 mm, and an over-travel of 0.75 mm.

LISTED UNDER: Electromechanical/Mechanical Devices

Switches Target Appliance, Medical Device, Security and Instrumentation

April 14, 2008 7:23 am | Product Releases | Comments

Suitable for use in applications such as security and detection, medical device, appliance, instrumentation, and power tools, the TS series of sub-miniature snap action switches from E-Switch have a contact rating of 0.3A at 6V DC, an insulation resistance of 100 M?, (min) at 100V DC, and a dielectric strength of 250V AC. The switches have a typical lifetime of 50,000 cycles and an operating temperature range from –25°C to + 85°C.

LISTED UNDER: Electromechanical/Mechanical Devices
Advertisement

SPDT Surface Mount Switches Target Military Applications

April 11, 2008 9:14 am | Product Releases | Comments

RLC Electronics announced the MIL-DTL-3928 QPL Series of SPDT surface mount switches that operate within a frequency range from 8 GHz to 18 GHz. The nominal operating voltage is 5V DC, 12V DC or 28V DC, depending on model. The insertion loss at DC to 8 GHz is 0.4 dB maximum and at DC to 18 GHz is 0.7 maximum.

LISTED UNDER: Electromechanical/Mechanical Devices

Silent Detect Switch Accepts Wide-Angle Actuation

April 11, 2008 4:41 am | Product Releases | Comments

Targeting tactile-switch applications where input may come in from a variety of angles, the KSJ Series of normally-open SPST detect switch has a spherical actuator for a ±30° force angle offset with a maximum stroke of 1.2 mm. The voltage range is from 20 mV to 32V DC at from 1 mA to 50 mA. With a contact resistance of less than

LISTED UNDER: Electromechanical/Mechanical Devices

Tactile Switches Provide Illumination Choice

April 10, 2008 8:27 am | Product Releases | Comments

With seven different cap options and a choice of LED, the JS Series of 12mm2 illuminated momentary tactile switch provides cosmetic design choices for control in applications such as A/V equipment, consumer electronics, and test instruments. Made of polycarbonate in a nylon housing, the 12V DC logic-level switch has a tested electrical life of 100,000 cycles. Additional features include a contact resistance of less than 50mW (initial) and a dielectric strength of 1000Vrms (minimum) with an insulation resistance of over 100mW (minimum).

LISTED UNDER: Electromechanical/Mechanical Devices

Crosspoint Matrix Provides High Current Capacity

April 10, 2008 5:15 am | Product Releases | Comments

The 60-600 high current capacity 256-relay crosspoint matrix from Pickering Interfaces can switch voltages up to 30V DC or 250V AC. With features including a 10A rating per channel the 1U rackmount device is deployable in a variety of matrix configurations, from 64 × 4 to 16 × 16, one pole, with 8-way high-power D-Type connectors for both the X- and Y-axis connections.

LISTED UNDER: Electromechanical/Mechanical Devices

Servo Motor Drives Large Loads with 4.5A Input

April 9, 2008 6:50 am | Product Releases | Comments

Suited for driving large flywheel loads without additional gearing, the QCI-A34L-1 servo motor can handle inertial miss-matches as great as 100:1. Providing a 185 oz-in (1.3Nm) of continuous torque, 260 oz-in (1.8Nm) of peak torque, and 100W of continuous mechanical power from an input of 4.5A, the motor can operate at speeds of up to 2000 RPM.

LISTED UNDER: Electromechanical/Mechanical Devices

Snap Action Switch Targets Multiple Applications

April 3, 2008 8:41 am | Product Releases | Comments

C&K Components announced the ZMS Series single pole, double throw compact sealed snap action switch featuring a variety of actuators and terminal styles including PC, solder, potted leads, and positive and reliable snap action mechanism. Designed for use in applications and environments, including communication devices, testing equipment, and motor controls. The RoHS-compliant and dust and splash-proof switch offers a life span of over 100,000 cycles, and electrical performance of up to 3 A at 125V AC with an operating temperature of -25°C to +85°C.

LISTED UNDER: Electromechanical/Mechanical Devices

Stepper Drive Accepts Direct AC Input

April 3, 2008 8:01 am | Product Releases | Comments

Suitable for laboratory, assembly, medical and packing environments, Copley Controls’ StepNet AC drive runs directly on 115/240 AC at 7A peak current to eliminate a separate DC supply. Features include servo mode operation as well as Command, Encoder, and Communications interfaces to suit different stand-alone and networked architectures and applications, including CAN/open, DeviceNet, and ASC11/Discrete I/O. Stepper commands include a ±10V position/velocity/torque command and PWM velocity/torque command. The 146 mm × 119  mm × 55 mm drive may be mounted flat or sideways and includes several built-in motion control modes such as indexing, PVT trajectory tracking, camming, and electronic gearing.

LISTED UNDER: Electromechanical/Mechanical Devices

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading