Advertisement

Switches Offer LED Options

July 25, 2008 5:41 am | Product Releases | Comments

Offering single and bi-colored LED options, CIT Relay & Switch’s SH Series of illuminated and non-illuminated switches have over 25 cap and actuator options with pre-engraved symbols and a 3.3-mm square post. The devices exhibit an electrical life of 100,000 cycles and an electrical rating of 50 mA at 35 VDC over an operating and storage temperature range from -40°C to 85°C. The switches have a minimum dielectric strength

LISTED UNDER: Electromechanical/Mechanical Devices

Benchtop Controllers Are Small In Size

July 22, 2008 8:35 am | Product Releases | Comments

Designed and Manufactured by Omega, the CSi32 Series is a series of miniature benchtop controllers and is the lastest to be built aroung the iSeries controllers. The controllers made witha metal enclosure feature a 4-digit display, full autotune heat-cool control, single ramp and soak capability, as well as

LISTED UNDER: Electromechanical/Mechanical Devices

Stepper Drive Features Common Control Interfaces and Programmable Languages

July 16, 2008 12:02 pm | Product Releases | Comments

Featuring common control interfaces and programmable languages, the STM Drive+Motor solution from Applied Motion Products is a stepper drive that is fused into a single device. The product has current control, anti-resonance technology, torque ripple smoothing and microstep emulation allowing the drive to

LISTED UNDER: Electromechanical/Mechanical Devices
Advertisement

Snap-In Illuminated Circular Rocker Switches

July 8, 2008 7:46 am | Product Releases | Comments

Illuminated single pole rocker switches, developed by C&K Components, feature a snap-in round body along with a variety of actuator styles. The rocker switches are available in black, white and red opaque color combinations. Electrical functionality is SPDT/On-On or SPST/On-Off. The Series fit a

LISTED UNDER: Electromechanical/Mechanical Devices

Relays Handle 4000 Vrms

June 26, 2008 5:17 am | Product Releases | Comments

Delivering up to 4000 Vrms of contact, CIT Relay & Switch’s J115F1 Series high dielectric-optioned relays have a minimum contact-to-contact strength of 1500 Vrms in SPST N.O., SPST N.C., or SPDT contact arrangements. The AgSnO2 or AgSnO2In2O3 devices provide voltage options from 3 to 100 VDC and

LISTED UNDER: Electromechanical/Mechanical Devices

Power Rocker Switch Is Waterproof

June 18, 2008 8:01 am | Product Releases | Comments

Providing protection against dust and water up to IP55, without external PVC cap, the KND-2 Series from Phaseda, utilizes a unique internal design to comply.  The weather proof power rocker switch snaps into industry standard panel cut-out size 0.862 x 1.169” (22 x 30mm) and contains

LISTED UNDER: Electromechanical/Mechanical Devices

8-Axis Motion Controller Incorporates Servo Drive

June 13, 2008 6:59 am | Product Releases | Comments

Designed to address advanced automation applications, Technosoft’s TMC-3D 8-axis motion controller includes a digital servo drive to control up to 8 Technosoft intelligent drives (including itself) via CAN-bus

LISTED UNDER: Electromechanical/Mechanical Devices

Fan Controller Accepts I2C Commands

June 12, 2008 8:25 am | Product Releases | Comments

Able to drive 4-wire DC fans and blowers, Control Resources’ SmartFan Cirrus-6 fan speed controller accepts commands from a custom or an I2C interface. The controller handles tach pulses from 6, 12, 24, or 48 VDC fans

LISTED UNDER: Electromechanical/Mechanical Devices
Advertisement

SPDT Relay Handles High Currents

May 27, 2008 5:57 am | Product Releases | Comments

Using stronger contacts and internal improvements on the armature, Hasco’s HAT 900 series relays are rated for 30 A on the N.O. side and 30 amps on the N.C. Presented as highest rated relay in this pin configuration for AC, relays are available with ratings such as 12, 24, 48, 110, 120, 220, 240 and 277 VAC. (DC coils are also available.)

LISTED UNDER: Electromechanical/Mechanical Devices

Motor Control Kits Include Optimized DSP Source Code

April 24, 2008 6:42 am | Product Releases | Comments

Based on Texas Instrument's TMS320F28335 floating-point digital signal controller, the Technosoft MCK28335 Motor Control Kit include source code and MATLAB libraries to provide a complete motion control development and evaluation package. Both BL (brushless) and IM (induction) kit versions complete C language source code, including a MATLAB motion library, complete DSP source code

LISTED UNDER: Electromechanical/Mechanical Devices

Miniature Servo Drive Integrates High Power Density

April 21, 2008 11:59 am | Product Releases | Comments

Elmo Motion Control added the Solo Whistle to its family of servo drives. This ready-to-use integrated device is designed to connect the company's Whistle Servo Drive directly to the application. The solution consists of the Whistle plus a connection interface which either eliminates or reduces

LISTED UNDER: Electromechanical/Mechanical Devices

Tiny Detect Switch Serves Mezzanine-Card Applications

April 17, 2008 8:52 am | Product Releases | Comments

Designed for side- and top-actuation with a board height of 3.5 mm, the HDT Series detect switch is suitable for use in Advanced Mezzanine Card (AMC) applications. Features include an operational life of 100,000 cycles with a maximum actuation force of 35 gm, a pre-travel of 0.30 mm, and an over-travel of 0.75 mm.

LISTED UNDER: Electromechanical/Mechanical Devices

Switches Target Appliance, Medical Device, Security and Instrumentation

April 14, 2008 7:23 am | Product Releases | Comments

Suitable for use in applications such as security and detection, medical device, appliance, instrumentation, and power tools, the TS series of sub-miniature snap action switches from E-Switch have a contact rating of 0.3A at 6V DC, an insulation resistance of 100 M?, (min) at 100V DC, and a dielectric strength of 250V AC. The switches have a typical lifetime of 50,000 cycles and an operating temperature range from –25°C to + 85°C.

LISTED UNDER: Electromechanical/Mechanical Devices

SPDT Surface Mount Switches Target Military Applications

April 11, 2008 9:14 am | Product Releases | Comments

RLC Electronics announced the MIL-DTL-3928 QPL Series of SPDT surface mount switches that operate within a frequency range from 8 GHz to 18 GHz. The nominal operating voltage is 5V DC, 12V DC or 28V DC, depending on model. The insertion loss at DC to 8 GHz is 0.4 dB maximum and at DC to 18 GHz is 0.7 maximum.

LISTED UNDER: Electromechanical/Mechanical Devices

Silent Detect Switch Accepts Wide-Angle Actuation

April 11, 2008 4:41 am | Product Releases | Comments

Targeting tactile-switch applications where input may come in from a variety of angles, the KSJ Series of normally-open SPST detect switch has a spherical actuator for a ±30° force angle offset with a maximum stroke of 1.2 mm. The voltage range is from 20 mV to 32V DC at from 1 mA to 50 mA. With a contact resistance of less than

LISTED UNDER: Electromechanical/Mechanical Devices

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading