Advertisement

Linear Positioning Stage Offers Micron Bidirectional Repeatability

September 15, 2008 7:49 am | Product Releases | Comments

Featuring micron bidirectional repeatability, the SMS 12 positioning stage from Equipment Solutions, combines a cross roller bearing stage and an almost zero backlash drive mechanism. This linear positioning stage has up to 12 mm of travel, 2Gs maximum acceleration, a maximum

LISTED UNDER: Electromechanical/Mechanical Devices

Alarm System Enables Complex Conditions

September 15, 2008 7:45 am | Product Releases | Comments

Enabling more complex alarm conditions, the EL042 EnviroMon PC data logging system from Pico Technology, is a system upgrade that automatically measure and records temperature, humidity and other parameters, and warns you when reading go out of range. The system

LISTED UNDER: Electromechanical/Mechanical Devices

Brushless DC Motor-Drive Offers Integral Driver

September 15, 2008 7:36 am | Product Releases | Comments

Designed with an integral driver, the LB22 from Nidec Copal, is a 22 mm brushless DC motor-drive that 3.26 oz/in. with an input current of 1.40 A at 12 VDC. The RoHS-compliant motor has separate power leads for the driver circuit and the motor allowing variable input to the motor for speed control. Another lead provides

LISTED UNDER: Electromechanical/Mechanical Devices
Advertisement

DC Servo Motors Run at High Speeds

September 15, 2008 7:30 am | Product Releases | Comments

Running at speeds from 0 rpm to 10,000 rpm, the MR15 line of DC Servo Motors from Dynetic, is capable of a torque up to 80 lbs/in. when coupled with a gearhead. Options on the motor include: all alluminum alloy parts which are anodized per

LISTED UNDER: Electromechanical/Mechanical Devices

Switches Allow Greater Application Possibilities

September 15, 2008 7:24 am | Product Releases | Comments

Suitable for a wide spectrum of applications, the PSE family is a group of Piezo switches from Schurter, that have been tested through the use of a high-pressure vapor stream at 90 Bar and temperature of 80°C. The device features a lifetime of over 20 million switching cycles, contains no moving parts and are manufactured with

LISTED UNDER: Electromechanical/Mechanical Devices

Touch Sensitive Switch Mounts Without Drilling Holes

September 15, 2008 7:06 am | Product Releases | Comments

Designed to suit new generation public transportation, the Series 58 touch-sensitive switch from EAO, mounts directly by adhesive without the need to drill holes. It will even operate through double-glazing of up to 16 mm thick. The device is fitted with an electronic switching element and contains no moving parts. Two LED’s enable the switch to change from

LISTED UNDER: Electromechanical/Mechanical Devices

Software Performs Motion Control Design

September 11, 2008 7:53 am | Product Releases | Comments

Configuring motion architectures for testing, Performance Motion Devices’ Pro-Motion motion control set-up software delivers auto-tuning for current loop and position loop of servo motors. The program offers multiple and simultaneous connection capabilities to various controllers, a multi-drop over serial and CAN networks, and scope tracing of

LISTED UNDER: Electromechanical/Mechanical Devices

DC Servo Motors Exhibit Inertia Matching

September 10, 2008 9:55 am | Product Releases | Comments

Coming in NEMA 23 and NEMA 34 frame sizes, AMETEK Technical & Industrial Products’ ID Series brush-commutated DC servo motors provide motor-to-load inertia matching for medium to high reflected load inertias. The IP42-constructed devices generate continuous torque from 0.212 Nm (1.880 lb/in.) to 1.590 Nm (14 lb/in.), rated

LISTED UNDER: Electromechanical/Mechanical Devices
Advertisement

Tact Switches Offer LED Options

September 5, 2008 11:57 am | Product Releases | Comments

Enduring an electrical life of 25,000 cycles, E-Switch’s TL1290 Series right-angle tact switches with through-hole termination and gold-plated contacts offer LEDs in blue, red, yellow and green. The devices exhibit a contact rating of 100 mA at 32 VDC, maximum initial contact resistance of 250 mO and minimum insulation resistance of

LISTED UNDER: Electromechanical/Mechanical Devices

Foot Switch Eliminates Stress

September 4, 2008 5:19 am | Product Releases | Comments

Having a cast aluminum cover, Linemaster Switch’s Linemaster Junior foot switch is said to eliminate lower leg stress and pain after many hours of usage while standing or sitting. The device is suitable for applications including communication equipment, conveyors, terminal application equipment, computer software programs and

LISTED UNDER: Electromechanical/Mechanical Devices

Servo Drives Supply 7 A

August 28, 2008 8:10 am | Product Releases | Comments

Measuring 5” × 3” × 1.75”, Applied Motion Products’ SV Series servo drives deliver up to 7 A rms continuous or 14 A rms peak output current from a 24 VDC to 80 VDC power supply. The devices provide 8 digital inputs, 4 digit outputs, 2 analog inputs and a RS232 or RS485 communication interface. The drives use a digital PID loop with

LISTED UNDER: Electromechanical/Mechanical Devices

Gearmotors Perform at ½ Horsepower

August 26, 2008 6:54 am | Product Releases | Comments

Designed as Von Weise drop-in replacements, Bison Gear & Engineering’s VWDIR line of fractional horsepower gearmotors deliver from 1/30 to ½ horsepower in commercial and industrial light applications. The parallel shaft and right angle devices offer output torques from 12 in./lbs to 800 in./lbs in over 75 models. DC models

LISTED UNDER: Electromechanical/Mechanical Devices

Detect Switches Provide Top and Side Actuation

August 22, 2008 6:23 am | Product Releases | Comments

Sitting 3.3 mm off the PC board, C&K Components’ SDT Series of surface mount detect switches use pendulum style construction to allow actuation from the top or the side. The RoHS-compliant devices exhibit a maximum actuation force of 30 g, contact rating of 1 mA at 5 VDC and a maximum contact resistance of 1 mO. The pick-and

LISTED UNDER: Electromechanical/Mechanical Devices

Relay Offers Coil Latching

August 19, 2008 5:37 am | Product Releases | Comments

Having standard and reversed contact arrangements (1 Form C), Panasonic Electric Works’ ARS relay includes 1- and 2-coil latching in frequencies of 3 GHz, 75 O and 50 O. The 14 mm × 8.6 mm × 7.2-mm SMT packaged device operates with a noise rating of 30 dB. The relay is appropriate for set top boxes and tuners, the digital broadcast

LISTED UNDER: Electromechanical/Mechanical Devices

Relay Yields 5 A Current

August 15, 2008 5:04 am | Product Releases | Comments

Measuring 0.62” × 0.43” × 0.44”, Hasco Components International’s SPDT Hasco relay switches a current of 5 A with a less expensive 2-A option. The device exhibits a coil voltage range from 3 to 48 VDC with a sensitive version for drawing less current. The relay offers a maximum switching voltage of 60 VDC or 120 VAC and switching

LISTED UNDER: Electromechanical/Mechanical Devices

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading