Advertisement

DC Servo Motors Exhibit Inertia Matching

September 10, 2008 9:55 am | Product Releases | Comments

Coming in NEMA 23 and NEMA 34 frame sizes, AMETEK Technical & Industrial Products’ ID Series brush-commutated DC servo motors provide motor-to-load inertia matching for medium to high reflected load inertias. The IP42-constructed devices generate continuous torque from 0.212 Nm (1.880 lb/in.) to 1.590 Nm (14 lb/in.), rated

LISTED UNDER: Electromechanical/Mechanical Devices

Tact Switches Offer LED Options

September 5, 2008 11:57 am | Product Releases | Comments

Enduring an electrical life of 25,000 cycles, E-Switch’s TL1290 Series right-angle tact switches with through-hole termination and gold-plated contacts offer LEDs in blue, red, yellow and green. The devices exhibit a contact rating of 100 mA at 32 VDC, maximum initial contact resistance of 250 mO and minimum insulation resistance of

LISTED UNDER: Electromechanical/Mechanical Devices

Foot Switch Eliminates Stress

September 4, 2008 5:19 am | Product Releases | Comments

Having a cast aluminum cover, Linemaster Switch’s Linemaster Junior foot switch is said to eliminate lower leg stress and pain after many hours of usage while standing or sitting. The device is suitable for applications including communication equipment, conveyors, terminal application equipment, computer software programs and

LISTED UNDER: Electromechanical/Mechanical Devices
Advertisement

Servo Drives Supply 7 A

August 28, 2008 8:10 am | Product Releases | Comments

Measuring 5” × 3” × 1.75”, Applied Motion Products’ SV Series servo drives deliver up to 7 A rms continuous or 14 A rms peak output current from a 24 VDC to 80 VDC power supply. The devices provide 8 digital inputs, 4 digit outputs, 2 analog inputs and a RS232 or RS485 communication interface. The drives use a digital PID loop with

LISTED UNDER: Electromechanical/Mechanical Devices

Gearmotors Perform at ½ Horsepower

August 26, 2008 6:54 am | Product Releases | Comments

Designed as Von Weise drop-in replacements, Bison Gear & Engineering’s VWDIR line of fractional horsepower gearmotors deliver from 1/30 to ½ horsepower in commercial and industrial light applications. The parallel shaft and right angle devices offer output torques from 12 in./lbs to 800 in./lbs in over 75 models. DC models

LISTED UNDER: Electromechanical/Mechanical Devices

Detect Switches Provide Top and Side Actuation

August 22, 2008 6:23 am | Product Releases | Comments

Sitting 3.3 mm off the PC board, C&K Components’ SDT Series of surface mount detect switches use pendulum style construction to allow actuation from the top or the side. The RoHS-compliant devices exhibit a maximum actuation force of 30 g, contact rating of 1 mA at 5 VDC and a maximum contact resistance of 1 mO. The pick-and

LISTED UNDER: Electromechanical/Mechanical Devices

Relay Offers Coil Latching

August 19, 2008 5:37 am | Product Releases | Comments

Having standard and reversed contact arrangements (1 Form C), Panasonic Electric Works’ ARS relay includes 1- and 2-coil latching in frequencies of 3 GHz, 75 O and 50 O. The 14 mm × 8.6 mm × 7.2-mm SMT packaged device operates with a noise rating of 30 dB. The relay is appropriate for set top boxes and tuners, the digital broadcast

LISTED UNDER: Electromechanical/Mechanical Devices

Relay Yields 5 A Current

August 15, 2008 5:04 am | Product Releases | Comments

Measuring 0.62” × 0.43” × 0.44”, Hasco Components International’s SPDT Hasco relay switches a current of 5 A with a less expensive 2-A option. The device exhibits a coil voltage range from 3 to 48 VDC with a sensitive version for drawing less current. The relay offers a maximum switching voltage of 60 VDC or 120 VAC and switching

LISTED UNDER: Electromechanical/Mechanical Devices
Advertisement

Tactile Switches Come on Tape and Reel

August 12, 2008 10:53 am | Product Releases | Comments

Measuring 6 × 3.5 mm in actuator lengths of 4.3 or 5 mm, CIT Relay & Switch’s CL1101 Series of SMT tactile switches have availability on a tape and reel in 1,500 pieces. The devices exhibit a tested electrical life of 100,000 cycles with an electrical rating of 50 mA at 48 VDC and dielectric strength of 1000 Vrms minimum

LISTED UNDER: Electromechanical/Mechanical Devices

Storage Controller Offers Sustained Recording and Playback

August 11, 2008 12:32 pm | Product Releases | Comments

Using a data interface system for the PCI Express bus, Conduant’s StreamStor Amazon Express storage controller exhibits more than 7 hours of sustained recording and playback performance at 600 MB/s. The full-sized PCI Express card installs into any PC with open PCI Express slots and supports up to 16 SerialATA disk

LISTED UNDER: Electromechanical/Mechanical Devices

Toggle Switch Delivers 2 Horsepower

August 8, 2008 6:37 am | Product Releases | Comments

Having a UL- and cUL-rating of 20 A at 125 VAC, Phaseda’s HY29 Series power toggle switches present a horse power rating of 2 with availability in single-pole and double-pole versions. The TUV-approved component offers functions including ON-OFF, ON-ON, ON-OFF-ON and (ON)-OFF in industrial control applications. The RoHS-compliant switches offer terminals with a 0.25 quick connect or solder lug as well as a

LISTED UNDER: Electromechanical/Mechanical Devices

Servo Drive Delivers Up To 6 A

August 6, 2008 6:48 am | Product Releases | Comments

Addressing applications requiring high power levels such as, AC, DC, and linear motors the Bassoon from Elmo, is a Servo Drive with Absolute Encoder that can support up to 6 A of continuous current, while delivering up to 1.9 KW of continuous power and 3.8 KW peak. The servo drive features

LISTED UNDER: Electromechanical/Mechanical Devices

Infrared Switch Detects Non-Contact Object Sensing

August 6, 2008 5:39 am | Product Releases | Comments

Providing a transmissive sensing capability for design engineers, the OPB420 Series from OPTEK, is a slotted infrared optical switch for non-contact interruptive object sensing. The switch includes an infrared LED and phototransistor, allowing for an opaque object to block the light beam from

LISTED UNDER: Electromechanical/Mechanical Devices

OLED Smart Switches Feature High Resolution, Programmability

July 31, 2008 1:39 pm | Product Releases | Comments

NKK Switches announced the availability of its OLED SmartSwitch and SmartDisplay high resolution programmable switches. These switches offer high contrast more brilliant pictures, 180-degree viewing angles, full colors, lower power consumption, fast response times and no backlighting requirements. These programmable pushbutton switches and displays feature a programmable and changeable OLED module with 65,536 colors in 16 bit mode, and

LISTED UNDER: Electromechanical/Mechanical Devices | Optoelectronics & Displays

Miniature Controller Delivers Complete IP Connectivity

July 29, 2008 5:53 am | Product Releases | Comments

Offering complete IP connectivity and security in a small form factor, the CO2144 from Connect One, is the latest addition to the iChipSEC family of machine-to-machine IP Controllers. This 10 x 10 mm chip supports wireless LAN and cellular standards making it suitable for

LISTED UNDER: Electromechanical/Mechanical Devices

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading