Advertisement
Motors

Brushless DC motor includes power up to 120 W

July 25, 2014 2:43 pm | Maxon Precision Motors, Inc. | Product Releases | Comments

The new brushless drive from maxon precision motors (Fall River, MA) with a diameter of 19 mm has been specially designed for high speeds and features low heat development and extremely quiet and low-vibration running. This little powerhouse has applications in centers for miniaturized processing....

LISTED UNDER: Electromechanical/Mechanical Devices | Motors | Brushless DC

Automotive HVAC actuators feature very low noise

July 23, 2014 11:27 am | Johnson Electric | Product Releases | Comments

Johnson Electric (Hong Kong) announced an actuator platform for automotive HVAC air flow control. The Saia-Burgess HVAC platform is said to offer the industry’s widest speed and torque range in DC and Stepper motor options.

LISTED UNDER: Electromechanical/Mechanical Devices | Motors | Actuators

Stepper motors present maximum power, minimal size

June 30, 2014 10:33 am | Product Releases | Comments

With the new FDM0620 Series, MICROMO (Clearwater, FL) presents a high performance FAULHABER stepper motor with minimal size.  All components (including connections) are in a housing that measures 9.7 mm in length and 6 mm in diameter.

LISTED UNDER: Brushless
Advertisement

Brushed DC motor family offers desirable configuration options

May 23, 2014 11:40 am | Maxon Precision Motors, Inc. | Product Releases | Comments

Maxon’s (Fall River, MA) DCX Series brushed DC motors feature high power density and low vibration. In addition to the technical highlights, the program's appeal lies in the configuration options. Motors, gearheads and encoders may be selected and ordered online. The maxon X drives family is…

LISTED UNDER: DC

Motor kits cover a wide range of applications in direct drive motion control

May 2, 2014 11:49 am | Applimotion, Inc. | Product Releases | Comments

Applimotion’s (Loomis, CA) ULT, UTH, and UTS frameless brushless motor kits cover a wide range of applications in direct drive motion control. New sizes recently introduced have large center through-holes and thin radial cross-section. Coupling this to the…

LISTED UNDER: Brushless

Disc magnet motor presents exceptional dynamic performance

April 21, 2014 12:26 pm | Portescap | Product Releases | Comments

Portescap (West Chester, PA) introduced its P760 Series disc magnet motor, which is asserted to outperform standard Brushless DC motors in various applications. The thin disc magnet motor has been optimized to deliver high torque and acceleration up to 5,000 rpm.

LISTED UNDER: DC

32 HD motor designed for rough operating conditions

February 26, 2014 3:21 pm | Maxon Precision Motors, Inc. | Product Releases | Comments

The new maxon (Fall River, MA) EC-4pole 32 HD motor has been designed for extremely rough operating conditions, particularly applications in deep drilling. Deep drilling technology (called “downhole drilling” in the field of oil and gas exploration) makes it possible to recover oil and gas from depths of more than 2500 m.

LISTED UNDER: Brushless

Interior permanent magnet (IPM) brushless motors cover a wide range of applications

February 12, 2014 11:50 am | Applimotion, Inc. | Product Releases | Comments

Applimotion’s (Loomis, CA) ULT, UTH, UTS, and UTO frameless motor kits cover a wide range of applications in direct drive motion control with their large through-hole surface permanent magnet (SPM) rotor configurations.

LISTED UNDER: Brushless
Advertisement

Brake module mounts directly to any NEMA 17, 23, 34 or NEMA 42 frame motors

January 2, 2014 9:57 am | Servo2Go.com, Ltd. | Product Releases | Comments

The MPC is a power-off brake module with an output shaft. The unit mounts directly on to a NEMA C-Face servo or stepper motor and the output can also be coupled to a NEMA C-Face gear reducer. This brake is designed to decelerate or hold an inertial load when the voltage is turned off.

LISTED UNDER: AC

Evaluation kit lets designers spin BLDC motors instantly

December 5, 2013 5:00 pm | Allegro Microsystems, Inc. | Product Releases | Comments

Allegro MicroSystems, LLC introduced a new product evaluation kit for its A4915 three-phase MOSFET controller IC featuring an on-chip hall commutation and a unique speed control input. The speed input takes an analog voltage and generates

LISTED UNDER: Brushless DC

Single-phase AC motor controllers feature rated currents up to 20 amperes

November 7, 2013 4:48 pm | Product Releases | Comments

AirCare Automation is proud to announce the availability of its new, updated VariPhase Single-Phase AC motor controllers. The new VariPhase units enhanced features that will make speed control of a single-phase PSC motor easier and more consistent.

LISTED UNDER: AC

Gearhead series delivers high torque performance

October 18, 2013 10:13 am | MICROMO | Product Releases | Comments

MICROMO is pleased to announce the FAULHABER cutting-edge 15/10 planetary gearhead series--the only standard high torque precision gearhead in a 15 mm diameter on the market today. FAULHABER expands its product portfolio of precision gearheads with a 15mm diameter planetary gearhead that delivers high torque performance....

LISTED UNDER: Brushless

Planetary gearhead designed for high radial loads

July 18, 2013 2:49 pm | Product Releases | Comments

maxon motor has added two new gearheads to the already successful GP 32 program. Significant improvements have been made to the single-stage planetary gearhead: The planetary carrier has been reinforced, the bearings have been repositioned, and a ceramic version is now available.

LISTED UNDER: Brushless

Linear Motors

July 18, 2013 2:01 pm | H2W Technologies, Inc. | Products

H2W Technologies, Inc. is dedicated to the design and manufacture of linear and rotary motion products that are used in the motion control industry. We are committed to providing every customer with the optimal solution for their motion application in the shortest possible time, at the lowest possible cost using only the highest quality products.

LISTED UNDER: AC | DC | Electromechanical

Brushless DC motor includes bidirectional speed control and overtemperature protection

July 12, 2013 4:52 pm | Product Releases | Comments

Allied Motion Dordrecht announces the availability of an improved version of the proven brushless KinetiMax 54 motor series. The new 54 mm diameter KinetiMax 54 EB outer rotor motor with integrated drive electronics now has bidirectional speed control, overtemperature protection, and reverse polarity protection.

LISTED UNDER: Brushless

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading