Advertisement
Boards

High-speed 5 GS/s LXI digitizers available with up to eight fully synchronous channels

May 18, 2015 7:57 am | by Spectrum Instrumentation Corp. | Spectrum Instrumentation Corp. | Product Releases | Comments

For applications where fast electronic signals in the GHz range must be remotely acquired and analyzed, Spectrum has extended its popular digitizerNETBOX series of LXI based instruments by releasing eight new models. Available with two, four or eight fully synchronous channels the new units feature sampling rates up to 5 GS/s....

LISTED UNDER: Data Acquisition | Boards | Oscilloscopes

Signal analyzer intended for sound and vibration applications

May 4, 2015 12:58 pm | by Data Translation, Inc. | Data Translation, Inc. | Product Releases | Comments

VIBbox is a high-accuracy, high channel count, dynamic signal analyzer system for sound and vibration applications. VIBbox packages four DT9857E modules in a rugged enclosure for field use. It includes 64 IEPE 24-bit Delta-Sigma sensor inputs, eight 32-bit D/A stimulus outputs, four 32-bit C/Ts, 4 tachometers ...

LISTED UNDER: Boards

CSB1470 USB controlled Digital Input Output (DIO) Module

March 16, 2015 4:52 pm | J-Works, Inc. | Products

USB controlled DIO modules that support multiple voltage levels. 24 or 48 digital IO channels support interface voltage levels of 1.8V, 2.5V, 3.3V and 5V. Each channel can be configured as digital input or output.

LISTED UNDER: Computer | Data Acquisition | Embedded
Advertisement

Data acquisition system improves operational efficiency

November 3, 2014 11:51 am | Yokogawa | Product Releases | Comments

Yokogawa Electric Corporation (Sugar Land, TX) announces the development of the SMARTDAC+ GM data acquisition system, and will be releasing it to the market on November 17. The SMARTDAC+ GM data acquisition system improves operational efficiency....

LISTED UNDER: Test & Measurement | Data Acquisition | Boards

PCIe-IDIO-24 Isolated Digital I/O Card

June 19, 2014 3:34 pm | ACCES I/O Products, Inc. | Products

ACCES I/O Products, Inc., is pleased to announce a new addition to its PCI Express family of I/O cards—Model PCIe-IDIO-24. Designed for high-voltage protection in industrial control and monitoring applications, this product features 24 optically isolated digital inputs and 24 solid state FET relay outputs. The card is an x1 PCI Express device which can be used in any available PCI Express slot. Optocouplers on the card are rated for 2,500V isolation and help protect systems in industrial environments against high voltages or currents caused by line surges or ground loops. The solid state outputs are capable of switching from 5-34DC at 2A continuous.

LISTED UNDER: Computer | Data Acquisition | Embedded

JSB210B USB Relay Module

June 18, 2014 1:45 pm | J-Works, Inc. | Products

USB controlled 1 Amp 8 or 16 single pole double throw relay module. Software examples for various windows programs, linux and other operating systems

LISTED UNDER: Data Acquisition | Industrial | Boards

D/A Converter comes in FMC Format at 2.5 GSPS

May 21, 2014 10:25 am | Vadatech, Inc. | Product Releases | Comments

VadaTech (Henderson, NV) offers a Digital-to-Analog Converter (DAC) in the FPGA Mezzanine Card (FMC) format. The high-speed DAC offers 14-bit at 2.5 Giga samples per second. The mezzanine offers 8, 16, 32 or 72 QAM for amplitude modulation.

LISTED UNDER: Computer | Embedded | Boards

DSB3232 USB 32 channel Digital IO with mutiple voltage support.

March 4, 2014 1:23 pm | J-Works, Inc. | Products

The DSB3232 USB digital IO lines can be configured for input or output at the bit level supporting various logic family voltages. Those voltages included 1.8V, 2.5V 3.3V and 5V. Technicians wire the digital IO module using the on-board screw terminals. With the expanding number of logic level interface voltages, one of the challenges facing connecting devices to the USB bus is matching the required voltage levels and the DSB3232 meets those requirements.

LISTED UNDER: Computer | Microcomputer | Embedded
Advertisement

JSB470 USB 24 Channel Parallel Digital IO Module

February 7, 2014 3:20 pm | J-Works, Inc. | Products

JSB470 series of digital input and output modules controlled over the USB. Engineers control the channel direction and values from any host computer. Each digital IO line is 5V tolerant and provides a minimum 2.5V output at 15ma, and sink 24ma. A technician wires the digital IO module to their hardware via a standard 25 pin sub "D" connector. The user communicates with the module from any programming or test language that supports USB communications as shown in provided sample applications. Perfect for a variety of control, monitor and test & measurement applications

LISTED UNDER: Data Acquisition | Industrial | Instrument Control

JSB2158 USB controlled relay module 8 channel 2 Amp

December 3, 2013 3:53 pm | J-Works, Inc. | Products

JSB2158 series of USB controlled relay modules. Eight (8) channels of SPDT relays are rated at 2A or 60W/125VA with a maximum voltage of 220VDC or 250VAC. Power from the USB port is used for the relays, eliminating the need for an external supply. A sub 'D' connectors allows users to wire in their equipment. A software programmer can start with the provided sample code to use various high level languages or 3rd party programs.. Complete product specifications available at http://www.j-works.com/jsb2158.php .

LISTED UNDER: Data Acquisition | Embedded | Industrial

JSB39616 USB 16 Channel Input Module

August 21, 2013 5:53 pm | J-Works, Inc. | Products

JSB39616 series of USB 16 channel switch input modules. Each channel input has an on-board pull-up resistor to sense switch (SW) closure or opening (SWNC). Typical applications include sensing dry contact closures from sources such as limit switches, proximity switches, selector switches, push buttons and photoelectric switches. In electrical noisy environments the DC versions provide isolated pull-up voltage and common so input channels are isolated from system (USB) side of module. Switch states can be monitored with a simple to use Windows interface using either a traditional DLL or managed class library.

LISTED UNDER: Data Acquisition | Industrial | Proximity

USB Latching 8 Amp relay Module Model RSB2084

June 26, 2013 9:26 pm | J-Works, Inc. | Products

RSB2084 series of 8 Amp Latching SPST relay modules controlled over the USB. The relays are rated at 8A @ 250VAC Wire connection to the relay module are made with on-board screw type terminals and controlled by USB commands. A "latching relay' has two relaxed states (bistable). These relays are called 'impulse', "keep" or "stay" types. When the power is switched off the relays, the relay remains in its last state. The relay retains the last state during any power outages, and will only switch when command to by the host PC. The user communicates with the module from any programming or test language that supports USB communications as shown in provided sample applications.

LISTED UNDER: Computer | Embedded | Industrial

Modular DC electronic load designed for multi-channel DC source testing

April 24, 2013 1:43 pm | B&K Precision Corporation | Product Releases | Comments

B&K Precision announced its new MDL Series, a modular programmable DC electronic load system. The MDL Series comprises six unique modules ranging in power from 200 W to 600 W. Any combination of these modules can be installed for multi-channel operation in the 4-slot MDL Series mainframe....

LISTED UNDER: Boards

PCB test system designed for aircraft, transportation, and manufacturing industries

March 26, 2013 3:33 pm | Saelig Company, Inc. | Product Releases | Comments

Saelig Company has introduced the System 8 Diagnostic Solution Plus - a unique, versatile, easy-to-use PCB test system that uses a selection of CD-drive-size modules to create a PC-driven PCB test station. The System 8 Diagnostic Solution Plus, which can be built in a PC case or 19" rack-mounted...

LISTED UNDER: Printed Circuit | Boards

PXI Express chassis serves applications requiring enhanced bandwidth and higher density and capacity

March 20, 2013 10:19 am | Product Releases | Comments

ADLINK Technology announced a new PXI Express (PXIe) chassis for applications requiring enhanced bandwidth and higher density and capacity. ADLINK’s PXES-2780, an 18-slot PXI Express chassis with 10 hybrid peripheral slots, provides a configurable PCI Express (PCIe) switch fabric....

LISTED UNDER: Boards

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading