Advertisement
Cooling & Thermal Management

Push-pin heat sinks offer more than 100,000 configurations

December 3, 2014 3:41 pm | Product Releases | Comments

With 108,000 possible configurations, Advanced Thermal Solutions, Inc. (Norwood, MA) now provides the widest choice of push pin-mounted heat sinks for cooling BGAs and other hot components. More than 200 ATS heat sinks are available with ...

LISTED UNDER: Cooling & Thermal Management | Heat Sinks & Dissipators | Heat Pips Thermal Gap Pads Materials and Substrates

Thermal protector ideal for motor, lighting, and electronic applications

December 2, 2014 4:20 pm | Portage Electric Products | Product Releases | Comments

Portage Electric Products, Inc. (North Canton, OH) has introduced a round snap-action thermal protector ideal for many motor, lighting, and electronic applications up to 5 AMPS and 250 VAC. The PEPI Model ST01 is the first PEPI product available in ...

LISTED UNDER: Cooling & Thermal Management

AC fans adhere to IP54 standards

October 10, 2014 3:27 pm | Product Releases | Comments

Qualtek (Mentor, OH) introduces a series of high-performance, low-cost AC fans, the HPLC series, which have been tested to IP54 and withstand harsh environmental conditions, including dust and water. With industry-leading prices, these fans ...

LISTED UNDER: Cooling & Thermal Management | Blowers & Fans | Axial
Advertisement

Custom 19-inch fan tray designed for demanding military applications

September 23, 2014 10:10 am | Product Releases | Comments

Verotec (Derry, NH) has supplied a major US-based defense contractor with custom design intelligent fan trays for a major defence project. The 19-inch rack-mounted 1U trays have six fans, strategically located within the tray to maximise....

LISTED UNDER: Cooling & Thermal Management | Blowers & Fans

NTC chip thermistors come in compact sizes with high temperature ratings to +150°C

July 15, 2014 4:10 pm | Ametherm | Product Releases | Comments

Ametherm (Carson City, NV) introduced four new series of NTC chip thermistors for high-accuracy temperature measurement. The STC0134-X, STC0138-X, STC0143, and STC0144-X Series devices are available in a variety of compact sizes, while providing…

LISTED UNDER: Cooling & Thermal Management | Passive & Discrete Devices | Chip

AC & DC axial fans available for harsh environments and IP56 rated

July 9, 2014 3:31 pm | Qualtek Electronics Corp. | Product Releases | Comments

Qualtek (Mentor, Ohio) introduces its series of high-performance, low-cost HPLC series, AC and DC axial fans tested to withstand harsh environmental conditions, including dust and water. The axial fan series, with sizes ranging from 172mm to 280mm, have met or exceeds the international standard IEC 60529....

LISTED UNDER: Cooling & Thermal Management | Blowers & Fans | Axial

2014 IMPACT Award Winner: JARO Thermal wins for Cooling and Thermal Management

May 30, 2014 10:15 am | Jaro Thermal | Product Releases | Comments

The Three-Phase (wired) “Motor-to-DC”, sensorless, brushless, low-vibrating, high-efficiency, UL/ CUL & CE certified fans from JARO Thermal (Boca Raton, FL) uses significantly less power than most standard, single-phase wired fans. Available with an optional water-protected IP 55 rating ...

LISTED UNDER: Axial

Thermal controller designed to operate with thermoelectric modules

April 2, 2014 1:33 pm | Oven Industries, Inc. | Product Releases | Comments

Oven Industries’ (Mechanicsburg, PA) Model 5R7-350/347 is an economical thermal controller especially designed to operate with thermoelectric (Peltier effect) modules. Most of these modules may be operated in either a cooling mode or a heating mode depending on current direction....

LISTED UNDER: Heat Pips Thermal Gap Pads Materials and Substrates
Advertisement

Miniature thermoelectric modules designed for temperature stabilization applications

January 31, 2014 3:26 pm | Laird Technologies | Product Releases | Comments

Laird has announced a new series of miniature thermoelectric modules (TEMs) built using Laird Tlam thermally conductive circuit boards instead of traditional ceramic-based circuit boards. The Tlam OptoTEC series is designed for applications where temperature stabilization of sensitive optical components...

LISTED UNDER: Heat Pips Thermal Gap Pads Materials and Substrates

Dimensionally stable two component urethane modified epoxy gel is thermally conductive

January 6, 2014 11:58 am | Master Bond Inc. | Product Releases | Comments

Primarily used for potting and encapsulation applications, Master Bond Super Gel 9AO is a soft, urethane modified gel-like epoxy that offers thermal conductivity and electrical insulation properties. This two part system is also employed for

LISTED UNDER: Heat Pips Thermal Gap Pads Materials and Substrates

Airflow controller improves fan testing for electronics thermal management studies

August 12, 2013 3:31 pm | Product Releases | Comments

Advanced Thermal Solutions, Inc., ATS has introduced the FSC-200Fan Speed Controller for providing precise management of fan speeds during thermal management studies of electronic devices. The FSC-200 comes with ATS stageSPEED software which allows the use of a PC to incrementally control the speed of fan and fan trays from 0 to 100% of their maximum power.

LISTED UNDER: Heat Pips Thermal Gap Pads Materials and Substrates

Personal air-conditioning vest re-designed for better comfort and cooling

June 26, 2013 3:57 pm | Product Releases | Comments

ITW Vortec today launched its re-designed and re-engineered Personal Air Conditioning (PAC) vest. The Vortec PAC vest, already praised as an innovative solution to protect industrial workers in extreme temperature environments, now offers even more features to ensure comfort and cooling.

LISTED UNDER: Heat Pips Thermal Gap Pads Materials and Substrates

New option for thermoelectrically cooled electronic enclosures makes washdowns fast and easy

June 10, 2013 1:26 pm | Product Releases | Comments

EIC Solutions has announced the new M74 clean out modification option which facilitates washdown of thermoelectric coolers mounted to electronic enclosures. The M74 option was application-driven arising from suggestions received from customers in food processing, and other process industries requiring frequent rinsing or washing of equipment.

LISTED UNDER: Heat Pips Thermal Gap Pads Materials and Substrates | Metal

Epoxy mount socket operates at bandwidths up to 8 GHz

May 22, 2013 3:12 pm | Ironwood Electronics, Inc. | Product Releases | Comments

Ironwood Electronics has recently introduced a new high-performance BGA socket for 0.8mm pitch BGA 78 pin DDR3 packages. The SG-BGA-6374 socket is designed for an 9x13 mm package size and operates at bandwidths up to 8 GHz with less than 1dB of insertion loss.

LISTED UNDER: Heat Pips Thermal Gap Pads Materials and Substrates | Ethernet/Internet

Compact vane axial fans deliver airflows up to 283 CFM

May 8, 2013 3:23 pm | Product Releases | Comments

Orion Fans has developed a new series of small, powerful vane axial (VXC) fans for harsh, high-static pressure environments for medical, networking and telecom equipment. Designed to deliver airflows of up to 283 CFM in a compact package...

LISTED UNDER: Axial

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading