Cooling & Thermal Management
Compact vane axial fans deliver airflows up to 283 CFM
May 8, 2013 3:23 pm | Product Releases | CommentsOrion Fans has developed a new series of small, powerful vane axial (VXC) fans for harsh, high-static pressure environments for medical, networking and telecom equipment. Designed to deliver airflows of up to 283 CFM in a compact package...
LISTED UNDER: Axial
Dispensable thermal pads tout desirable performance for LED lamps, luminaires
April 24, 2013 11:41 am | Product Releases | CommentsDow Corning introduced new Dispensable Thermal Pads, which are positioned as providing cost-effective thermal management in LED lighting applications. The new materials are said to enable LED lamp and luminaire manufacturers t
LISTED UNDER: Heat Pips Thermal Gap Pads Materials and Substrates
Coolers designed for low-profile applications
March 6, 2013 9:52 am | Jaro Thermal | Product Releases | CommentsBy embedding a leading-edge 50x50x13 mm fan inside of a skived-copper-fin heatsink, Jaro's unique "Skive" Cooler significantly reduces height requirements for low-profile applications, while providing unsurpassed surface-area. The dense arrangement of thin copper fins offers unheralded thermal conductivity.
LISTED UNDER: Heat Pips Thermal Gap Pads Materials and Substrates
Low-viscosity thermally conductive silicone compound fills all unwanted gaps up to 0.50mm in height
March 4, 2013 10:55 am | Product Releases | CommentsFujipoly announces the introduction of SARCON® SPG-20A, an easy to dispense, low-viscosity thermally conductive silicone compound. When applied between a heat-generating component and a nearby heat sink or spreader, the very low compression, form-in-place material completely fills all unwanted gaps up to 0.50mm in height.
LISTED UNDER: Heat Pips Thermal Gap Pads Materials and Substrates
Thermal imaging test kits designed for research, development, and machine vision applications
February 21, 2013 3:13 pm | Product Releases | CommentsFLIR Systems introduces its new FLIR A5sc, A15sc, and A35sc longwave infrared thermal imaging camera kits. Designed specifically for thermal bench top testing applications and easy deployment in tight machine vision locations, AX5sc cameras are available in a variety of pixel resolutions from 80×64 and 160×128 up to 320×256....
LISTED UNDER: Heat Pips Thermal Gap Pads Materials and Substrates | Temperature
IP55-rated AC fans designed for rugged environments
February 19, 2013 1:48 pm | Product Releases | CommentsOrion Fans has expanded its product offering to include IP55-rated versions of its OA Series AC fans, making them ideal for rugged, harsh environment applications. These fans feature diecast aluminum frames and a dual ball bearing system to deliver a reliable and quiet cooling solution.
LISTED UNDER: Housings
Thermal interface material designed to transfer heat to heat sink
January 29, 2013 4:13 pm | Fujipoly America | Product Releases | CommentsFujipoly announces the availability of Sarcon50GR-Ae, an extremely soft .5mm thick thermal interface material. The gel-like sheet compound is designed to efficiently transfer heat from its source to a nearby heat sink. The unique physical properties of this material allow it to protect delicate board-level components as it fills unwanted air gaps and levels uneven surfaces.
LISTED UNDER: Heat Pips Thermal Gap Pads Materials and Substrates
80x80x76mm "Turbo" Fan surpasses static pressure barrier
January 21, 2013 9:16 am | Jaro Thermal | Product Releases | CommentsSpinning at over 19,000 rpm's, JARO's new 80mm x 76mm combination of counter-rotating fans exceeds the static pressure barrier by reaching an unheralded 10 inches of static pressure (in H20). To achieve such a forceful level of "super-cooled" air flow (136.41 CFM), the stability, power consumption, vibration & speed of these new Turbo Fans are all tightly monitored & controlled.
LISTED UNDER: Axial
Liquid cold plate heat sinks offer uniform cooling distribution under mounted power modules
October 19, 2012 10:06 am | News | CommentsRichardson RFPD, Inc. announces availability and full design services support for four new liquid cold plate heat sinks from PriaTherm. The four devices are light and compact, offer uniform cooling distribution under mounted power modules, and feature an aluminum alloy Al EN AW 6060 finish.
LISTED UNDER: Cooling & Thermal Management
Cold plate four-pass heatsinks provide maximum heat removal
October 17, 2012 10:33 am | Product Releases | CommentsOhmite Manufacturing Company announces the CP4 Series of cold plate four-pass heatsinks. These liquid coldplates are designed for Ohmite heatsinkable type resistors, including the TAP600, TAP800, TA1K0, TA2K0, and various SOT-227 resistor packages.
LISTED UNDER: Cooling & Thermal Management
AC fan-cooling solutions serve electric vehicle charging systems
October 11, 2012 9:57 am | Product Releases | CommentsDallas-based Orion Fans, a division of Knight Electronics, has developed a thermally-controlled series of AC fans designed for electric vehicle (EV) charging systems. The smart AC axial fans feature a ball-bearing design that can deliver airflows up to 100 CFM...
LISTED UNDER: Cooling & Thermal Management
Non-contact infrared temp. transmitters features a response time of 240mS
August 3, 2012 4:27 pm | Product Releases | CommentsOmega introduces its new series of non-contact infrared temperature transmitters.
LISTED UNDER: Cooling & Thermal Management
Three phase bridge assemblies feature low thermal resistance for increased output current
July 6, 2012 11:09 am | Product Releases | CommentsSolid State Devices, Inc. announced their enhanced SDA312A - SDA312G and SDA312AF - SDA312GF series of three phase bridge assemblies.
LISTED UNDER: Boards & Modules | Cooling & Thermal Management | Packaging & Interconnects
Air conditioning unit delivers up to 33,000 BTU of efficient cooling
June 11, 2012 10:09 am | Product Releases | CommentsTripp Lite has introduced a new energy-saving, row-based air conditioning unit. The SRCOOL33K has a 42U rack form factor and delivers up to 33,000 BTU of efficient cooling for high-density rack installations in data centers, server rooms and network closets.
LISTED UNDER: Cooling & Thermal Management
Ceramic heaters can operate in atmospheric and vacuum environments up to 1652°F
April 20, 2012 1:40 pm | Product Releases | CommentsDurex Industries recently announced the release of its new Advanced Ceramic Heater technology. Durex Industries’ ceramic heater technology is available in either Aluminum Nitride (AlN) or Alumina (Al2O3). Ceramic heater technologies offer significant advantages over metal based sheath heaters...
LISTED UNDER: Cooling & Thermal Management