Advertisement
Industrial

DSB3232 USB 32 channel Digital IO with mutiple voltage support.

March 4, 2014 1:23 pm | J-Works, Inc. | Products

The DSB3232 USB digital IO lines can be configured for input or output at the bit level supporting various logic family voltages. Those voltages included 1.8V, 2.5V 3.3V and 5V. Technicians wire the digital IO module using the on-board screw terminals. With the expanding number of logic level interface voltages, one of the challenges facing connecting devices to the USB bus is matching the required voltage levels and the DSB3232 meets those requirements.

LISTED UNDER: Computer | Microcomputer | Embedded
Advertisement

JSB470 USB 24 Channel Parallel Digital IO Module

February 7, 2014 3:20 pm | J-Works, Inc. | Products

JSB470 series of digital input and output modules controlled over the USB. Engineers control the channel direction and values from any host computer. Each digital IO line is 5V tolerant and provides a minimum 2.5V output at 15ma, and sink 24ma. A technician wires the digital IO module to their hardware via a standard 25 pin sub "D" connector. The user communicates with the module from any programming or test language that supports USB communications as shown in provided sample applications. Perfect for a variety of control, monitor and test & measurement applications

LISTED UNDER: Data Acquisition | Industrial | Instrument Control

ANDROID-232 RS-232 Serial Adapter for Android Devices

February 6, 2014 8:23 pm | ACCES I/O Products Inc. | Products

ACCES I/O Products, Inc. is pleased to announce the release of a new USB serial interface board - the ANDROID-232. Users can now control legacy RS-232 devices directly from modern Android devices. The ANDROID-232 uses the Android Open Accessory protocol to convince an Android device that its onboard USB port (normally limited to USB "slave" or "OTG" modes) is actually an RS-232 port. This two way data port allows external hardware to control the Android unit or for the Android unit to control external hardware. Onboard circuitry will provide power to charge your Android device while connected. Multiple status and fault LEDs complete the package, and allow simple and convenient confirmation of operational state.

LISTED UNDER: Computer | Data Acquisition | Embedded

JSB2158 USB controlled relay module 8 channel 2 Amp

December 3, 2013 3:53 pm | J-Works, Inc. | Products

JSB2158 series of USB controlled relay modules. Eight (8) channels of SPDT relays are rated at 2A or 60W/125VA with a maximum voltage of 220VDC or 250VAC. Power from the USB port is used for the relays, eliminating the need for an external supply. A sub 'D' connectors allows users to wire in their equipment. A software programmer can start with the provided sample code to use various high level languages or 3rd party programs.. Complete product specifications available at http://www.j-works.com/jsb2158.php .

LISTED UNDER: Data Acquisition | Embedded | Industrial

JSB2851 USB controlled SPDT relay module

November 22, 2013 1:51 pm | J-Works, Inc. | Products

JSB2851 series of 10Amp SPDT form 'C' relay modules controlled over the USB. The USB controlled SPDT relay outputs provide host control between a common line and normally open and close connection points. The relays are rated at 10A @ 277VAC and 10A @ 28VDC with a contact resistance of 250 milliOhm. Wire connection to the relays are made with on-board screw type terminals. The user communicates with the module from any programming or test language that supports USB communications as shown in provided sample applications.

LISTED UNDER: Computer | Data Acquisition | Embedded

Ethernet controller suits small- to mid-sized applications

November 13, 2013 11:22 am | Wago Corporation | Product Releases | Comments

Appropriate for small- to mid-sized applications, WAGO's 750-852 Eco Ethernet Controller features a built-in two port Ethernet switch, simplifying network wiring in a line topology. The programmable controller promises enhanced performance for high-speed applications.

LISTED UNDER: Industrial

JSB2142 2Amp DPDT USB relay module

September 11, 2013 9:09 pm | J-Works, Inc. | Products

JSB2142 series of DPDT 2 Amp relay modules controlled by USB. The relays are rated at 60W max 220VDC or 125VA max 350VAC. There are four (4) options for quick and easy connection to the relay outputs. A molex "KK" series header provides a removable wire connection. Or a screw type terminal block allows fixed point wiring. A 14 pin ribbon connector allows easy connection to user's custom hardware, or the same connector can be on the bottom to allow soldering the module directly to user hardware. The user communicates with the module from any programming or test language from easy to use API.

LISTED UNDER: Data Acquisition | Embedded | Industrial

JSB39616 USB 16 Channel Input Module

August 21, 2013 5:53 pm | J-Works, Inc. | Products

JSB39616 series of USB 16 channel switch input modules. Each channel input has an on-board pull-up resistor to sense switch (SW) closure or opening (SWNC). Typical applications include sensing dry contact closures from sources such as limit switches, proximity switches, selector switches, push buttons and photoelectric switches. In electrical noisy environments the DC versions provide isolated pull-up voltage and common so input channels are isolated from system (USB) side of module. Switch states can be monitored with a simple to use Windows interface using either a traditional DLL or managed class library.

LISTED UNDER: Data Acquisition | Industrial | Proximity

USB Latching 8 Amp relay Module Model RSB2084

June 26, 2013 9:26 pm | J-Works, Inc. | Products

RSB2084 series of 8 Amp Latching SPST relay modules controlled over the USB. The relays are rated at 8A @ 250VAC Wire connection to the relay module are made with on-board screw type terminals and controlled by USB commands. A "latching relay' has two relaxed states (bistable). These relays are called 'impulse', "keep" or "stay" types. When the power is switched off the relays, the relay remains in its last state. The relay retains the last state during any power outages, and will only switch when command to by the host PC. The user communicates with the module from any programming or test language that supports USB communications as shown in provided sample applications.

LISTED UNDER: Computer | Embedded | Industrial

Touch-panel PCs feature up to 2GB DDR II memory and 4GB DOM

June 13, 2013 2:12 pm | Saelig Company, Inc. | Product Releases | Comments

Saelig Company has introduced the SP-0L Series of economical, entry-level industrial touch panel PCs equipped with Intel's Atom N270 CPU and 945 GSE & ICH7M chipset on a 3.5" Single Board Computer form factor, and 1GB (up to 2GB) DDR II memory and 4GB DOM.

LISTED UNDER: Industrial | Touchscreens

Industrial mobile handheld computer utilizes the Windows CE 6.0 R3 operating system

April 18, 2013 2:58 pm | Adlink Technology | Product Releases | Comments

ADLINK Technology announced the IMX-9000, an industrial mobile handheld computer using the Windows CE 6.0 R3 operating system. Combining high-performance RFID, a barcode scanner and GPRS/WLAN wireless transmission functions to satisfy diverse working requirements, the IMX-9000—with superior resistance to impact, water, and dust—can be applied in a variety of industries....

LISTED UNDER: Industrial

Industrial analog I/O server targets process control and automation markets

April 3, 2013 10:26 am | Lantronix | Product Releases | Comments

Lantronix added the xSenso Controller to its xSenso analog sensor networking family, designed specifically for use in rugged and harsh environments including industrial automation, process control, manufacturing, chemicals, and oil and gas industries. The new analog and relay outputs provide the ability to

LISTED UNDER: Industrial

ETH100-6P

March 18, 2013 12:36 pm | InTalTech, Ltd. | Products

Expanding its MILCOMM ™ line of compact rugged communication converters , InTalTech is proud to introduce our new Military grade 6 ports Ethernet Switch (Model ETH100-6P). This high performance unit is designed to meet MIL-STD-810F, MIL-STD-461E, MIL-STD-1275B. The product is enclosed in a 4U²™ sealed aluminum casing complying with IP65 and operating at a temperature range of -35 to 70°C. Our unique U²™ mechanical concept is an easy to install module designed to meet harshest environmental conditions for airborne, naval and ground applications. Each of our U² products is a modular Lego-style unit providing easy plug'n'play installation and eventually creates endless possibilities to combine various U² modules into one rugged structure. For instance, a combination of 10U² units in a line creates a 19” module. Our military grade Ethernet switch might be directly installed on virtually any surface.

LISTED UNDER: Embedded | Industrial | Mil Spec

USB2-4H

March 18, 2013 12:31 pm | InTalTech, Ltd. | Products

As a part of MILCOMM ™ line , InTalTech is proud to introduce our new Military grade 4 ports USB HUB (Model USB2-4H). This high performance unit fully complies with MIL-STD-810F, MIL-STD-461E, MIL-STD-1275B. The product is enclosed in a 2U²™ sealed casing complying with IP65 and operating at a temperature range of -35 to 70°C. This unit is designed to provide USB 2.0 Hi-Speed 480 Mbps data transmission through each port and is externally powered enabling the unit to supply 500 mA of power on each port, guaranteeing broadest compatibility with USB devices.

LISTED UNDER: Embedded | Industrial | Metal

JSB2871 USB contol AC outlet relay

February 28, 2013 9:40 am | J-Works, Inc. | Products

JSB2871 series of 8 Amp DPST relay modules controlled over the USB with a standard AC power outlet. The relays are rated at 8A @ 240VAC. Wire connection to the relay module are made with on-board screw type terminals then any standard AC line cord can be plugged into the outlet and controlled by USB commands. A replaceable fuse provides protection of the relay and AC line. Options for the relay board include AC detection of either the input AC or output AC, telling the user if power is available. An on-board led gives a visual indication of the relay state. The user communicates with the module from any programming or test language that supports USB communications as shown in provided sample applications.

LISTED UNDER: Computer | Data Acquisition | Industrial

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading