Advertisement
Computer Peripherals & Networking Devices

Industrial-grade embedded computers feature Intel Multi-Core Atom E3800 processors

April 2, 2014 2:10 am | Winsystems | Product Releases | Comments

WinSystems (Arlington, TX) introduced a line of multi-core Intel Atom E3800 embedded computers designed to operate from -40°C to +85°C. The SBC35-CC405 Series of embedded PCs include onboard USB, Gigabit Ethernet, serial ports, and...

LISTED UNDER: Computer | Embedded
Advertisement

EBX computer board family adds a dual-core Intel Core i3 and a Celeron-based products

April 2, 2014 1:55 am | Versalogic Corp. | Product Releases | Comments

VersaLogic Corp. (Tualatin, OR) announced the release of two new models in its “Copperhead” line. The new offerings include a dual-core Intel Core i3 product, and a Celeron-based product. The models are positioned to provide both lower cost...

LISTED UNDER: Computer | Embedded

DSB3232 USB 32 channel Digital IO with mutiple voltage support.

March 4, 2014 1:23 pm | J-Works, Inc. | Products

The DSB3232 USB digital IO lines can be configured for input or output at the bit level supporting various logic family voltages. Those voltages included 1.8V, 2.5V 3.3V and 5V. Technicians wire the digital IO module using the on-board screw terminals. With the expanding number of logic level interface voltages, one of the challenges facing connecting devices to the USB bus is matching the required voltage levels and the DSB3232 meets those requirements.

LISTED UNDER: Computer | Microcomputer | Embedded

40G MicroTCA chassis platform is presented as industry’s first

February 28, 2014 12:17 pm | Vadatech, Inc. | Product Releases | Comments

VadaTech (Henderson, NV) announced a 40G MicroTCA chassis platform. The 5U chassis holds up to 12 full-sized Advanced Mezzanine Card (AMC) modules in the single width format. The VT866 is designed for 40GbE (10GBASE-KR) signals. 

LISTED UNDER: Embedded

Fanless embedded computer presents desirable performance, Intel Core i7-4700EQ processor

February 11, 2014 10:31 am | Adlink Technology | Product Releases | Comments

ADLINK Technology, Inc., (San Jose, CA) announced its Matrix MXE-5400 fanless embedded computer based on the 4th generation Intel Core i7-4700EQ quad-core processor. The MXE-5400 delivers desirable performance, manageability, optimized connectivity, and

LISTED UNDER: Embedded

JSB470 USB 24 Channel Parallel Digital IO Module

February 7, 2014 3:20 pm | J-Works, Inc. | Products

JSB470 series of digital input and output modules controlled over the USB. Engineers control the channel direction and values from any host computer. Each digital IO line is 5V tolerant and provides a minimum 2.5V output at 15ma, and sink 24ma. A technician wires the digital IO module to their hardware via a standard 25 pin sub "D" connector. The user communicates with the module from any programming or test language that supports USB communications as shown in provided sample applications. Perfect for a variety of control, monitor and test & measurement applications

LISTED UNDER: Data Acquisition | Industrial | Instrument Control

ANDROID-232 RS-232 Serial Adapter for Android Devices

February 6, 2014 8:23 pm | ACCES I/O Products Inc. | Products

ACCES I/O Products, Inc. is pleased to announce the release of a new USB serial interface board - the ANDROID-232. Users can now control legacy RS-232 devices directly from modern Android devices. The ANDROID-232 uses the Android Open Accessory protocol to convince an Android device that its onboard USB port (normally limited to USB "slave" or "OTG" modes) is actually an RS-232 port. This two way data port allows external hardware to control the Android unit or for the Android unit to control external hardware. Onboard circuitry will provide power to charge your Android device while connected. Multiple status and fault LEDs complete the package, and allow simple and convenient confirmation of operational state.

LISTED UNDER: Computer | Data Acquisition | Embedded

JSB2158 USB controlled relay module 8 channel 2 Amp

December 3, 2013 3:53 pm | J-Works, Inc. | Products

JSB2158 series of USB controlled relay modules. Eight (8) channels of SPDT relays are rated at 2A or 60W/125VA with a maximum voltage of 220VDC or 250VAC. Power from the USB port is used for the relays, eliminating the need for an external supply. A sub 'D' connectors allows users to wire in their equipment. A software programmer can start with the provided sample code to use various high level languages or 3rd party programs.. Complete product specifications available at http://www.j-works.com/jsb2158.php .

LISTED UNDER: Data Acquisition | Embedded | Industrial

JSB2851 USB controlled SPDT relay module

November 22, 2013 1:51 pm | J-Works, Inc. | Products

JSB2851 series of 10Amp SPDT form 'C' relay modules controlled over the USB. The USB controlled SPDT relay outputs provide host control between a common line and normally open and close connection points. The relays are rated at 10A @ 277VAC and 10A @ 28VDC with a contact resistance of 250 milliOhm. Wire connection to the relays are made with on-board screw type terminals. The user communicates with the module from any programming or test language that supports USB communications as shown in provided sample applications.

LISTED UNDER: Computer | Data Acquisition | Embedded

Ethernet controller suits small- to mid-sized applications

November 13, 2013 11:22 am | Wago Corporation | Product Releases | Comments

Appropriate for small- to mid-sized applications, WAGO's 750-852 Eco Ethernet Controller features a built-in two port Ethernet switch, simplifying network wiring in a line topology. The programmable controller promises enhanced performance for high-speed applications.

LISTED UNDER: Industrial

JSB2142 2Amp DPDT USB relay module

September 11, 2013 9:09 pm | J-Works, Inc. | Products

JSB2142 series of DPDT 2 Amp relay modules controlled by USB. The relays are rated at 60W max 220VDC or 125VA max 350VAC. There are four (4) options for quick and easy connection to the relay outputs. A molex "KK" series header provides a removable wire connection. Or a screw type terminal block allows fixed point wiring. A 14 pin ribbon connector allows easy connection to user's custom hardware, or the same connector can be on the bottom to allow soldering the module directly to user hardware. The user communicates with the module from any programming or test language from easy to use API.

LISTED UNDER: Data Acquisition | Embedded | Industrial

JSB39616 USB 16 Channel Input Module

August 21, 2013 5:53 pm | J-Works, Inc. | Products

JSB39616 series of USB 16 channel switch input modules. Each channel input has an on-board pull-up resistor to sense switch (SW) closure or opening (SWNC). Typical applications include sensing dry contact closures from sources such as limit switches, proximity switches, selector switches, push buttons and photoelectric switches. In electrical noisy environments the DC versions provide isolated pull-up voltage and common so input channels are isolated from system (USB) side of module. Switch states can be monitored with a simple to use Windows interface using either a traditional DLL or managed class library.

LISTED UNDER: Data Acquisition | Industrial | Proximity

USB3 controller hubs offer high degree of flexibility and integration

July 22, 2013 2:33 pm | Microchip Technology Inc. | Product Releases | Comments

 Microchip Technology Inc. announced its third-generation USB3 Controller Hubs (UCH3s)—the four-member USB553XB-5000 family, which is SuperSpeed Logo Certified by the USB Implementers Forum and is the world’s first to integrate OTP Flash configuration memory, according to the company. 

LISTED UNDER: Embedded

6U FPGA card with trio of Xilinx Virtex-7 FPGAs touts desirable processing density and I/O flexibility

July 10, 2013 8:38 am | Curtiss-Wright Controls | Product Releases | Comments

Curtiss-Wright Controls Defense Solutions has announced its CHAMP-FX4 COTS 6U FPGA engine. This rugged, high-performance OpenVPX (VITA 65) board is said to be the industry’s first COTS 6U FPGA engine to feature triple on-board Xilinx Virtex-7 devices in a single chassis slot.

LISTED UNDER: Computer | Embedded

Fanless mini PC features PCI or PCIe expansion slot capability

July 9, 2013 3:02 pm | Stealth Computer Corporation | Product Releases | Comments

Stealth.com (Stealth Computer) has released a new powerful Fanless Mini PC model LPC-700F featuring built-in PCI or PCIe expansion slot capability. The LPC-700F outperforms other small sized PC systems due to the integration of the latest Intel 3rd Generation Core i7 mobile processors. The LPC-700F ships standard with an Intel i7 Processor 3610QE CPU....

LISTED UNDER: Embedded

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading