Advertisement

JSB2851 USB controlled SPDT relay module

November 22, 2013 1:51 pm | J-Works, Inc. | Products

JSB2851 series of 10Amp SPDT form 'C' relay modules controlled over the USB. The USB controlled SPDT relay outputs provide host control between a common line and normally open and close connection points. The relays are rated at 10A @ 277VAC and 10A @ 28VDC with a contact resistance of 250 milliOhm. Wire connection to the relays are made with on-board screw type terminals. The user communicates with the module from any programming or test language that supports USB communications as shown in provided sample applications.

LISTED UNDER: Computer | Data Acquisition | Embedded

Ethernet controller suits small- to mid-sized applications

November 13, 2013 11:22 am | Wago Corporation | Product Releases | Comments

Appropriate for small- to mid-sized applications, WAGO's 750-852 Eco Ethernet Controller features a built-in two port Ethernet switch, simplifying network wiring in a line topology. The programmable controller promises enhanced performance for high-speed applications.

LISTED UNDER: Industrial

JSB2142 2Amp DPDT USB relay module

September 11, 2013 9:09 pm | J-Works, Inc. | Products

JSB2142 series of DPDT 2 Amp relay modules controlled by USB. The relays are rated at 60W max 220VDC or 125VA max 350VAC. There are four (4) options for quick and easy connection to the relay outputs. A molex "KK" series header provides a removable wire connection. Or a screw type terminal block allows fixed point wiring. A 14 pin ribbon connector allows easy connection to user's custom hardware, or the same connector can be on the bottom to allow soldering the module directly to user hardware. The user communicates with the module from any programming or test language from easy to use API.

LISTED UNDER: Data Acquisition | Embedded | Industrial
Advertisement

JSB39616 USB 16 Channel Input Module

August 21, 2013 5:53 pm | J-Works, Inc. | Products

JSB39616 series of USB 16 channel switch input modules. Each channel input has an on-board pull-up resistor to sense switch (SW) closure or opening (SWNC). Typical applications include sensing dry contact closures from sources such as limit switches, proximity switches, selector switches, push buttons and photoelectric switches. In electrical noisy environments the DC versions provide isolated pull-up voltage and common so input channels are isolated from system (USB) side of module. Switch states can be monitored with a simple to use Windows interface using either a traditional DLL or managed class library.

LISTED UNDER: Data Acquisition | Industrial | Proximity

USB3 controller hubs offer high degree of flexibility and integration

July 22, 2013 2:33 pm | Microchip Technology Inc. | Product Releases | Comments

 Microchip Technology Inc. announced its third-generation USB3 Controller Hubs (UCH3s)—the four-member USB553XB-5000 family, which is SuperSpeed Logo Certified by the USB Implementers Forum and is the world’s first to integrate OTP Flash configuration memory, according to the company. 

LISTED UNDER: Embedded

6U FPGA card with trio of Xilinx Virtex-7 FPGAs touts desirable processing density and I/O flexibility

July 10, 2013 8:38 am | Curtiss-Wright Controls | Product Releases | Comments

Curtiss-Wright Controls Defense Solutions has announced its CHAMP-FX4 COTS 6U FPGA engine. This rugged, high-performance OpenVPX (VITA 65) board is said to be the industry’s first COTS 6U FPGA engine to feature triple on-board Xilinx Virtex-7 devices in a single chassis slot.

LISTED UNDER: Computer | Embedded

Fanless mini PC features PCI or PCIe expansion slot capability

July 9, 2013 3:02 pm | Stealth Computer Corporation | Product Releases | Comments

Stealth.com (Stealth Computer) has released a new powerful Fanless Mini PC model LPC-700F featuring built-in PCI or PCIe expansion slot capability. The LPC-700F outperforms other small sized PC systems due to the integration of the latest Intel 3rd Generation Core i7 mobile processors. The LPC-700F ships standard with an Intel i7 Processor 3610QE CPU....

LISTED UNDER: Embedded

Membrance switch technology designed for HMI

July 3, 2013 12:06 pm | Product Releases | Comments

 Printec USA  announced membrane switch technology for human machine interface, HMI, which can be demonstrated with a unique demo keypad to display many possible applications for embedded infrared and capacitive sensors. The demo keypad is the first tool of its kind to combine the capacitive and infrared technology into a single board in order to display the electromechanical, visual and cosmetic features of the switch technology.

LISTED UNDER: Embedded
Advertisement

USB Latching 8 Amp relay Module Model RSB2084

June 26, 2013 9:26 pm | J-Works, Inc. | Products

RSB2084 series of 8 Amp Latching SPST relay modules controlled over the USB. The relays are rated at 8A @ 250VAC Wire connection to the relay module are made with on-board screw type terminals and controlled by USB commands. A "latching relay' has two relaxed states (bistable). These relays are called 'impulse', "keep" or "stay" types. When the power is switched off the relays, the relay remains in its last state. The relay retains the last state during any power outages, and will only switch when command to by the host PC. The user communicates with the module from any programming or test language that supports USB communications as shown in provided sample applications.

LISTED UNDER: Computer | Embedded | Industrial

Touch-panel PCs feature up to 2GB DDR II memory and 4GB DOM

June 13, 2013 2:12 pm | Saelig Company, Inc. | Product Releases | Comments

Saelig Company has introduced the SP-0L Series of economical, entry-level industrial touch panel PCs equipped with Intel's Atom N270 CPU and 945 GSE & ICH7M chipset on a 3.5" Single Board Computer form factor, and 1GB (up to 2GB) DDR II memory and 4GB DOM.

LISTED UNDER: Industrial | Touchscreens

PXI embedded controller includes up to 16 GB of 1333 MHz DDR3 memory

June 13, 2013 10:20 am | Product Releases | Comments

ADLINK Technology announced the introduction of its PXI-3980, ADLINK’s first quad-core PXI embedded controller featuring the high-performance Intel® Core™ i7-2715QE 2.1 GHz processor, with up to 16 GB of 1333 MHz DDR3 memory, for seamless execution in multitasking environments and reduced test times.

LISTED UNDER: Embedded

Fanless mini PC ideal for space-challenged applications

May 20, 2013 11:01 am | Stealth Computer Corporation | Product Releases | Comments

Stealth.com has released a new powerful fanless small form factor PC model LPC-480FS. The LPC-480FS is a highly reliable, fanless, energy efficient, rugged mini PC designed for a large variety of demanding applications. Stealth's LPC-480FS is a powerful diminutive computer that operates without noisy cooling fans which could draw in dirt and dust potentially causing catastrophic failures.

LISTED UNDER: Embedded

Smart protocol converter translates avionics messages in real-time

May 1, 2013 11:47 am | Product Releases | Comments

Data Device Corporation (DDC) introduced the AceXtreme Bridge Device to translate avionics messages in real-time between MIL-STD-1553, ARINC 429, and Ethernet in any direction, without a host computer. With an onboard Intel Atom processor, two Ethernet channels, two

LISTED UNDER: Data Acquisition | Embedded

Industrial mobile handheld computer utilizes the Windows CE 6.0 R3 operating system

April 18, 2013 2:58 pm | Product Releases | Comments

ADLINK Technology announced the IMX-9000, an industrial mobile handheld computer using the Windows CE 6.0 R3 operating system. Combining high-performance RFID, a barcode scanner and GPRS/WLAN wireless transmission functions to satisfy diverse working requirements, the IMX-9000—with superior resistance to impact, water, and dust—can be applied in a variety of industries....

LISTED UNDER: Industrial

Industrial analog I/O server targets process control and automation markets

April 3, 2013 10:26 am | Lantronix | Product Releases | Comments

Lantronix added the xSenso Controller to its xSenso analog sensor networking family, designed specifically for use in rugged and harsh environments including industrial automation, process control, manufacturing, chemicals, and oil and gas industries. The new analog and relay outputs provide the ability to

LISTED UNDER: Industrial

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading