Advertisement

Small chassis contains four complete systems

May 27, 2014 8:11 am | General Micro Systems | Product Releases | Comments

General Micro Systems, Inc. (Rancho Cucamonga, CA) has introduced a conduction-cooled, fully ruggedized, Secure Virtual Machine (SVM) server with six hardware independent I/O modules. Designed to replace multiple workstations using virtual machine technology…

LISTED UNDER: Embedded

High current, smart motor controller targets automated guided vehicles

May 23, 2014 10:33 am | Roboteq, Inc | Product Releases | Comments

Roboteq (Scottsdale, AZ) introduced an intelligent controller capable of directly driving two DC motors up to 120 A each. The XDC2230 is targeted at designers of mobile robots, automatic guided vehicles (AGVs), warehouse automation systems or any other high power motor control application.

LISTED UNDER: Embedded

D/A Converter comes in FMC Format at 2.5 GSPS

May 21, 2014 10:25 am | Vadatech, Inc. | Product Releases | Comments

VadaTech (Henderson, NV) offers a Digital-to-Analog Converter (DAC) in the FPGA Mezzanine Card (FMC) format. The high-speed DAC offers 14-bit at 2.5 Giga samples per second. The mezzanine offers 8, 16, 32 or 72 QAM for amplitude modulation.

LISTED UNDER: Computer | Embedded | Boards
Advertisement

Computing platform provides I/O design configurability

May 13, 2014 12:13 pm | Elma Electronic Inc. | Product Releases | Comments

Elma Electronic Inc. (Fremont, CA) introduced the S50J Computing Platform, a rugged field-deployable system with abundant configurable I/O for design versatility. According to the company, virtually any I/O scheme can be supported using…

LISTED UNDER: Embedded

Motherboard is based on AMD Embedded G-Series SOC platform

May 13, 2014 11:23 am | Congatec, Inc. | Product Releases | Comments

congatec AG (Deggendorf, Germany) introduced an industrial Mini-ITX motherboard. The new embedded motherboards will meet the same standards and quality as the established Computer-On-Modules from congatec. This Mini ITX board is…

LISTED UNDER: Computer | Embedded

Carrier card offers scalable data acquisition to PCIe

May 1, 2014 5:41 pm | Product Releases | Comments

4DSP (Austin, TX) announced the release of a new PCI Express product featuring the Xilinx Kintex-7 combined with the highest performance analog I/O card available in the marketplace, according to the company. With a single-channel…

LISTED UNDER: Data Acquisition | Embedded

Industrial-grade embedded computers feature Intel Multi-Core Atom E3800 processors

April 2, 2014 2:10 am | Winsystems | Product Releases | Comments

WinSystems (Arlington, TX) introduced a line of multi-core Intel Atom E3800 embedded computers designed to operate from -40°C to +85°C. The SBC35-CC405 Series of embedded PCs include onboard USB, Gigabit Ethernet, serial ports, and...

LISTED UNDER: Computer | Embedded

EBX computer board family adds a dual-core Intel Core i3 and a Celeron-based products

April 2, 2014 1:55 am | Versalogic Corp. | Product Releases | Comments

VersaLogic Corp. (Tualatin, OR) announced the release of two new models in its “Copperhead” line. The new offerings include a dual-core Intel Core i3 product, and a Celeron-based product. The models are positioned to provide both lower cost...

LISTED UNDER: Computer | Embedded
Advertisement

DSB3232 USB 32 channel Digital IO with mutiple voltage support.

March 4, 2014 1:23 pm | J-Works, Inc. | Products

The DSB3232 USB digital IO lines can be configured for input or output at the bit level supporting various logic family voltages. Those voltages included 1.8V, 2.5V 3.3V and 5V. Technicians wire the digital IO module using the on-board screw terminals. With the expanding number of logic level interface voltages, one of the challenges facing connecting devices to the USB bus is matching the required voltage levels and the DSB3232 meets those requirements.

LISTED UNDER: Computer | Microcomputer | Embedded

40G MicroTCA chassis platform is presented as industry’s first

February 28, 2014 12:17 pm | Vadatech, Inc. | Product Releases | Comments

VadaTech (Henderson, NV) announced a 40G MicroTCA chassis platform. The 5U chassis holds up to 12 full-sized Advanced Mezzanine Card (AMC) modules in the single width format. The VT866 is designed for 40GbE (10GBASE-KR) signals. 

LISTED UNDER: Embedded

Fanless embedded computer presents desirable performance, Intel Core i7-4700EQ processor

February 11, 2014 10:31 am | Product Releases | Comments

ADLINK Technology, Inc., (San Jose, CA) announced its Matrix MXE-5400 fanless embedded computer based on the 4th generation Intel Core i7-4700EQ quad-core processor. The MXE-5400 delivers desirable performance, manageability, optimized connectivity, and

LISTED UNDER: Embedded

JSB470 USB 24 Channel Parallel Digital IO Module

February 7, 2014 3:20 pm | J-Works, Inc. | Products

JSB470 series of digital input and output modules controlled over the USB. Engineers control the channel direction and values from any host computer. Each digital IO line is 5V tolerant and provides a minimum 2.5V output at 15ma, and sink 24ma. A technician wires the digital IO module to their hardware via a standard 25 pin sub "D" connector. The user communicates with the module from any programming or test language that supports USB communications as shown in provided sample applications. Perfect for a variety of control, monitor and test & measurement applications

LISTED UNDER: Data Acquisition | Industrial | Instrument Control

ANDROID-232 RS-232 Serial Adapter for Android Devices

February 6, 2014 8:23 pm | ACCES I/O Products, Inc. | Products

ACCES I/O Products, Inc. is pleased to announce the release of a new USB serial interface board - the ANDROID-232. Users can now control legacy RS-232 devices directly from modern Android devices. The ANDROID-232 uses the Android Open Accessory protocol to convince an Android device that its onboard USB port (normally limited to USB "slave" or "OTG" modes) is actually an RS-232 port. This two way data port allows external hardware to control the Android unit or for the Android unit to control external hardware. Onboard circuitry will provide power to charge your Android device while connected. Multiple status and fault LEDs complete the package, and allow simple and convenient confirmation of operational state.

LISTED UNDER: Computer | Data Acquisition | Embedded

JSB2158 USB controlled relay module 8 channel 2 Amp

December 3, 2013 3:53 pm | J-Works, Inc. | Products

JSB2158 series of USB controlled relay modules. Eight (8) channels of SPDT relays are rated at 2A or 60W/125VA with a maximum voltage of 220VDC or 250VAC. Power from the USB port is used for the relays, eliminating the need for an external supply. A sub 'D' connectors allows users to wire in their equipment. A software programmer can start with the provided sample code to use various high level languages or 3rd party programs.. Complete product specifications available at http://www.j-works.com/jsb2158.php .

LISTED UNDER: Data Acquisition | Embedded | Industrial

JSB2851 USB controlled SPDT relay module

November 22, 2013 1:51 pm | J-Works, Inc. | Products

JSB2851 series of 10Amp SPDT form 'C' relay modules controlled over the USB. The USB controlled SPDT relay outputs provide host control between a common line and normally open and close connection points. The relays are rated at 10A @ 277VAC and 10A @ 28VDC with a contact resistance of 250 milliOhm. Wire connection to the relays are made with on-board screw type terminals. The user communicates with the module from any programming or test language that supports USB communications as shown in provided sample applications.

LISTED UNDER: Computer | Data Acquisition | Embedded

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading