Advertisement
Boards & Modules

PWM modules provide easy integration into new and existing applications

August 19, 2014 9:09 am | Product Releases | Comments

Optimal Engineering Systems, Inc. (Van Nuys, CA) offers a low-cost solution for solenoid control electronics. In Pick & Hold applications, a higher (Pick) force is required initially and then a switch is made to a lower continuous (Hold) force....

LISTED UNDER: Boards & Modules

3U CompactPCI processor blade presents high reliability for railway services

August 18, 2014 11:21 am | Product Releases | Comments

ADLINK Technology announced availability of its new 3U CompactPCI processor blade, the cPCI-3620, which runs on a low power, quad-core Intel Atom System-on-Chip (SoC) carrying up to 4GB DDR3L-1333 ECC soldered memory and providing…

LISTED UNDER: Boards & Modules | Boards | Computer

Chassis platform maximizes computing density with full redundancy

July 28, 2014 1:28 pm | Vadatech, Inc. | Product Releases | Comments

VadaTech (Henderson, NV) now offers a 1U MicroTCA chassis platform with several unique design features that allow more slots in a front-to-rear cooled solution while maintaining full redundancy. The VT840 employs several design concepts to maximize computing density....

LISTED UNDER: Boards & Modules | Boards | Microcomputer
Advertisement

Motion controllers expand their program memory

July 24, 2014 10:40 am | Galil Motion Control | Product Releases | Comments

Galil Motion Control (Rocklin, CA) announced more program memory for the DMC-40x0 and DMC-41x3. This release doubles the program memory from 2000 x 80 characters to 4000 x 80 characters and increases the total array elements from …

LISTED UNDER: Boards

System on module helps engineers develop embedded systems faster

July 22, 2014 3:48 pm | National Instruments | Product Releases | Comments

NI (Austin, TX) announced the NI SOM. It combines the Xilinx Zynq All Programmable system on a chip (SoC) with supporting components such as memory on a small PCB and features a complete middleware solution and ready-to-go Linux-based real-time operating system (RTOS) already integrated....

LISTED UNDER: Boards

Wireless power transfer demonstration kit delivers 35 W and Operates at 6.78 MHz

July 15, 2014 12:00 pm | Efficient Power Conversion | Product Releases | Comments

Efficient Power Conversion Corporation (El Segundo, CA) announced the immediate availability of a complete demonstration wireless power transfer kit. The system is capable of delivering up to 35 W into a DC load while operating at 6.78 MHz (the lowest ISM band).

LISTED UNDER: Kits | Development | Power Sources & Signal Conditioning Devices

Rugged 6U VPX radar solution is SWaP-optimized

July 14, 2014 10:41 am | Product Releases | Comments

ADLINK Technology, Inc. (San Jose, CA) announced the VPX6000, a rugged 6U VPX blade featuring a dual processor design based on quad-core 4th generation Intel Core i7-4700EQ processors.

LISTED UNDER: Computer

FMCs designed for network interface

July 10, 2014 1:11 pm | Vadatech, Inc. | Product Releases | Comments

VadaTech (Henderson, NV) now offers FMCs with high-speed interfaces up to 40GB speeds. This includes cages for dual QSPF+, SPF+, and RJ-45 as well as some quad cage versions. The latest in the network interface series of FMCs is the FMC108....

LISTED UNDER: Boards & Modules
Advertisement

COTS card performs data acquisition, signal processing and storage in XMC form factor

July 7, 2014 10:44 am | Product Releases | Comments

4DSP’s (Austin, TX) FM788 FPGA-based COTS card is designed to perform in a variety of applications, including beamforming, direction finding, RADAR, and satellite communications. This XMC module is based on Xilinx’s Virtex-7 and features …

LISTED UNDER: Computer | Data Acquisition | Embedded

PCIe-IDIO-24 Isolated Digital I/O Card

June 19, 2014 3:34 pm | ACCES I/O Products, Inc. | Products

ACCES I/O Products, Inc., is pleased to announce a new addition to its PCI Express family of I/O cards—Model PCIe-IDIO-24. Designed for high-voltage protection in industrial control and monitoring applications, this product features 24 optically isolated digital inputs and 24 solid state FET relay outputs. The card is an x1 PCI Express device which can be used in any available PCI Express slot. Optocouplers on the card are rated for 2,500V isolation and help protect systems in industrial environments against high voltages or currents caused by line surges or ground loops. The solid state outputs are capable of switching from 5-34DC at 2A continuous.

LISTED UNDER: Computer | Data Acquisition | Embedded

JSB215 USB 2 Amp Relay Module

June 18, 2014 1:49 pm | J-Works, Inc. | Products

USB control 2 amp relay module supports both AC and DC signals. Easy to use software API allows control 8 or 16 relays. Support for various operating systems.

LISTED UNDER: Data Acquisition | Microcomputer | Industrial

JSB210B USB Relay Module

June 18, 2014 1:45 pm | J-Works, Inc. | Products

USB controlled 1 Amp 8 or 16 single pole double throw relay module. Software examples for various windows programs, linux and other operating systems

LISTED UNDER: Data Acquisition | Industrial | Boards

Module includes an integrated OSBDM

June 16, 2014 11:28 am | Axiom Manufacturing | Product Releases | Comments

The APS12OS module from Axiom Manufacturing (Richardson, TX) includes an integrated OSBDM, which is compatible with both Windows 7 and Windows 8 operating systems. This module supports the Freescale MC9 S12C128, the MC9 S12DT256 or the MC9S12XDT512 microcontrollers....

LISTED UNDER: Microcomputer

2014 IMPACT Award Winner: LSI Corporation wins for Boards and Modules

May 28, 2014 12:57 pm | Lsi Corporation | Product Releases | Comments

Syncro CS from LSI Corporation (San Jose, CA) provides administrators with MegaRAID RAID 5, 6 data protection in the event of a drive failure. In the event of a server failure, Syncro CS delivers shared storage and failover, keeping applications up and running....

LISTED UNDER: Microcomputer

D/A Converter comes in FMC Format at 2.5 GSPS

May 21, 2014 10:25 am | Vadatech, Inc. | Product Releases | Comments

VadaTech (Henderson, NV) offers a Digital-to-Analog Converter (DAC) in the FPGA Mezzanine Card (FMC) format. The high-speed DAC offers 14-bit at 2.5 Giga samples per second. The mezzanine offers 8, 16, 32 or 72 QAM for amplitude modulation.

LISTED UNDER: Computer | Embedded | Boards

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading