PCI Express Board with 16 RS-232 Ports

September 21, 2007 8:02 am | Product Releases | Comments

Sealevel Systems, Inc. introduces its 16-port RS-232 serial I/O adapter for the new PCI Express bus design. Each serial port provides a maximum data rate of 460.8K bps and the COMM+16.PCIe has an operating range from 0° to +70°C. Extended temperature versions operating from -40°C to +85°C are also available. The device is suitable for connecting to PLCs, bar code readers, scales and other data acquisition/control devices

LISTED UNDER: Boards & Modules

High-Performance Embedded PC Modules

September 21, 2007 7:51 am | Product Releases | Comments

Ampro Computers, Inc. supports Intel’s “Santa Rosa” embedded launch with a pair of high-performance Core 2 Duo embedded PC modules. This product offers dual core processors with the Intel 965 chipset in the Type 2 pinout of the official PICMG COM.0 COM Express form factor up to Core 2 Duo L7500 CPU at 1.6 GHz, along with 4 MB of on-chip L2 cache, 800 MHz FSB (front side bus) and two SODIMM sockets for up to 4 GB of RAM.

LISTED UNDER: Boards & Modules

High Density I/O Stations for IP 20 Applications

September 21, 2007 7:35 am | Product Releases | Comments

Turck, Inc. expands its line of DeviceNet I/O stations with the addition of FDN20 high density I/O stations for IP 20 applications that are capable of supporting up to 32 inputs or 16 dedicated inputs and 16 input/outputs on a DeviceNet network. These devices separate the I/O into three isolated groups that can be powered by an external source or by the DeviceNet bus. The outputs are short circuit protected up to 0.5A on the 16 dedicated input and 16 input/output station. They use a glass-filled nylon housing with an integrated DIN-rail mount

LISTED UNDER: Boards & Modules

Photo Interrupter for Handhelds and CE Portables

September 21, 2007 7:27 am | Product Releases | Comments

Sharp Microelectronics launches its GP1S296HCPSF a small photo interrupter with a housing volume measuring 2.5 mm × 1.8 mm × 1.9 mm. Due to this level of miniaturization, the registrable pitch is reduced from 0.3 mm to 0.2 mm. It can be used in slim product designs that require a low mounting height and limited mounting space at the same time. The unit is suitable for portable applications such as a sensor for controlling auto focus and zoom drives in digital pocket cameras.

LISTED UNDER: Boards & Modules

Thin-Film Batteries for Embedded Systems

September 21, 2007 5:55 am | Product Releases | Comments

Cymbet Corporation announced its EnerChip family of solid-state, thin-film batteries. The products provide energy storage in form factors such as coin cell batteries and super capacitors. The battery is available in capacities of 12µ Ah, 50u Ah and 85µ Ah and can be automatically surface mounted. The devices can be lead-free reflow soldered (260°C) using high-speed SMT pick & place assembly processes. The devices offer a fast recharge time

LISTED UNDER: Boards & Modules

Lean Managed Switch Provides Key Management Functions

September 20, 2007 9:42 am | Product Releases | Comments

Phoenix Contact introduces the Lean Managed Switch (LMS) managed Ethernet switch. It supports SNMP (Simple Network Management Protocol), RSTP (Rapid Spanning Tree Protocol), IGMP (Internet Group Management Protocol) Snooping and easy web-based management capability.  These features allow for the addition of network configuration capability, remote monitoring and diagnostics, and integral IT-compatible network redundancy.  An “E” version is available for use in EtherNet/IP applications, where Multicast traffic is a concern.

LISTED UNDER: Boards & Modules

Power Modules Maximize Space in Home Appliances and Industrial Motors

September 4, 2007 9:42 am | Fairchild Semiconductor | Product Releases | Comments

Fairchild Semiconductor introduces ten highly efficient, integrated Motion-SPM power modules for home appliances and industrial motors up to the 3 kW power range. Integrating fully tested components––three HVICs, one LVIC, six NPT IGBTs, six FRDs and three bootstrap diodes––into a compact 44 mm x 26.8 mm Mini-DIP package

LISTED UNDER: Boards & Modules | ICs

Python-programmable GPRS and GPS Modules

August 28, 2007 11:15 am | Product Releases | Comments

Round Solution introduces communications modules that can be programmed with Python, an open-source-licensed programming language. These miniaturized industrial-grade modules include the GPRS unit and a combination GPRS/GPS unit that can be mounted in SMT, eliminating the costs of RF plugs and cables as well as time-consuming manual operations. Access to geodata enables users to construct positioning equipment quickly.

LISTED UNDER: Boards & Modules

Evaluation Board for Secure Internet Protocol Controller

August 28, 2007 11:11 am | Product Releases | Comments

Connect One announces its II-EVB-600, an evaluation board for programming the iChip CO2064, a proprietary small footprint Internet protocol (IP) controller that targets resource-constrained machine-to-machine (M2M) applications where encryption and security is required. The board supports many upper layer Internet protocols using either AT+i commands or the iChipConfig utility, and it can be used for evaluation and development of secure WiFi, LAN, cellular or dial-up networking

LISTED UNDER: Boards & Modules

USB 2.0 Device Controller

August 28, 2007 11:07 am | Product Releases | Comments

Altera Corp. introduces a complete USB 2.0 hi-/full-speed device controller from System Level Solutions. It is comprised of a soft IP core, software and class drivers and proprietary snap-on PHY daughtercards. Applications are in the consumer, medical, industrial, storage and automotive infotainment markets. This device controller is protocol compliant and multiple versions are available, allowing designers to add the protocol demanded by their application.

LISTED UNDER: Boards & Modules

6U CompactPCI System Monitoring and Control Board

August 28, 2007 11:03 am | Product Releases | Comments

One Stop Systems introduces its 6U CompactPCI (CPCI) system monitoring and control board (6U SYSMON II) that monitors the health and status of chassis systems, making it suitable for telecom, datacom, ISP and wireless server applications that require monitoring of critical system parameters. It installs in the system enclosure and communicates to a remote PC via a 100Base-T Ethernet connection.

LISTED UNDER: Boards & Modules

High-Density Analog Output Module

August 28, 2007 10:49 am | Product Releases | Comments

Red Lion Controls, Inc. announces its model CSOUT, a high-density analog output module that features four isolated, fully scalable outputs that are simple to configure and independently programmable for output ranges of 0-5V, 0-10V, ±10V, 0 to 20 mA, or 4 to 20 mA. The module can connect and communicate with PCs, PLCs and SCADA systems, featuring auto addressing to minimize configuration time.

LISTED UNDER: Boards & Modules

Industrial Computer with Compact Footprint

August 28, 2007 10:43 am | Product Releases | Comments

Sealevel Systems, Inc. introduces its Relio R1300 industrial computer powered by the high-performance, low-power AMD Geode 500 MHz LX800 processor.This computer with a remarkably compact footprint allows users to mount the unit to walls, under counters, on tabletops or to DIN rails using available optional brackets. The fanless operation of the computer improves reliability in industrial environments where dust and airborne particulates are present.

LISTED UNDER: Boards & Modules

Modules for Signal Switching and Conditioning

August 28, 2007 10:38 am | Product Releases | Comments

WAGO Corp. announces its 857 Series of 6 mm wide, DIN rail mount, signal conditioning and relay modules. Also known as JUMPFLEX, the modules offer a system approach to signal switching and conditioning. A common profile allows the sharing of accessories such as jumpers since every wire entry has a corresponding jumper slot. The module’s push-in jumper system is available in red, white and blue color designations with 2 pole to 10 pole configurations.

LISTED UNDER: Boards & Modules

Loop Powered Isolator to 3 KV

August 28, 2007 10:32 am | Product Releases | Comments

OTEK releases its model LPI opto-isolated loop powered transmitter that uses no transformers and choppers that reflect noise on the transmitter’s line. The transmitter uses a special technique to convert the incoming 4 mA to 20 mA frequency to drive the opto-isolator. The device comes in a miniature plastic case (metal on request) that can be din-rail mount, Velcro attached or in line with existing wiring.VDC and Hertz I/O options are also available.The LPI is useful in hazardous applications as an isolator or buster

LISTED UNDER: Boards & Modules


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.