Advertisement

USB 2.0 Device Controller

August 28, 2007 11:07 am | Product Releases | Comments

Altera Corp. introduces a complete USB 2.0 hi-/full-speed device controller from System Level Solutions. It is comprised of a soft IP core, software and class drivers and proprietary snap-on PHY daughtercards. Applications are in the consumer, medical, industrial, storage and automotive infotainment markets. This device controller is protocol compliant and multiple versions are available, allowing designers to add the protocol demanded by their application.

LISTED UNDER: Boards & Modules
Advertisement

6U CompactPCI System Monitoring and Control Board

August 28, 2007 11:03 am | Product Releases | Comments

One Stop Systems introduces its 6U CompactPCI (CPCI) system monitoring and control board (6U SYSMON II) that monitors the health and status of chassis systems, making it suitable for telecom, datacom, ISP and wireless server applications that require monitoring of critical system parameters. It installs in the system enclosure and communicates to a remote PC via a 100Base-T Ethernet connection.

LISTED UNDER: Boards & Modules

High-Density Analog Output Module

August 28, 2007 10:49 am | Product Releases | Comments

Red Lion Controls, Inc. announces its model CSOUT, a high-density analog output module that features four isolated, fully scalable outputs that are simple to configure and independently programmable for output ranges of 0-5V, 0-10V, ±10V, 0 to 20 mA, or 4 to 20 mA. The module can connect and communicate with PCs, PLCs and SCADA systems, featuring auto addressing to minimize configuration time.

LISTED UNDER: Boards & Modules

Industrial Computer with Compact Footprint

August 28, 2007 10:43 am | Product Releases | Comments

Sealevel Systems, Inc. introduces its Relio R1300 industrial computer powered by the high-performance, low-power AMD Geode 500 MHz LX800 processor.This computer with a remarkably compact footprint allows users to mount the unit to walls, under counters, on tabletops or to DIN rails using available optional brackets. The fanless operation of the computer improves reliability in industrial environments where dust and airborne particulates are present.

LISTED UNDER: Boards & Modules

Modules for Signal Switching and Conditioning

August 28, 2007 10:38 am | Product Releases | Comments

WAGO Corp. announces its 857 Series of 6 mm wide, DIN rail mount, signal conditioning and relay modules. Also known as JUMPFLEX, the modules offer a system approach to signal switching and conditioning. A common profile allows the sharing of accessories such as jumpers since every wire entry has a corresponding jumper slot. The module’s push-in jumper system is available in red, white and blue color designations with 2 pole to 10 pole configurations.

LISTED UNDER: Boards & Modules

Loop Powered Isolator to 3 KV

August 28, 2007 10:32 am | Product Releases | Comments

OTEK releases its model LPI opto-isolated loop powered transmitter that uses no transformers and choppers that reflect noise on the transmitter’s line. The transmitter uses a special technique to convert the incoming 4 mA to 20 mA frequency to drive the opto-isolator. The device comes in a miniature plastic case (metal on request) that can be din-rail mount, Velcro attached or in line with existing wiring.VDC and Hertz I/O options are also available.The LPI is useful in hazardous applications as an isolator or buster

LISTED UNDER: Boards & Modules

Modules Provide Optical Transceiver Tests

August 28, 2007 9:43 am | Agilent Technologies | Product Releases | Comments

Agilent Technologies, Inc. introduces four next-generation PXIT modules for optical transceiver manufacturing. The flexible modular platform allows optical transceiver manufacturers to combine key instruments needed to perform required measurements in one mainframe via the same interface, reducing the cost of test and increasing production throughput. The N2100B PXIT 8.5 Gb/s digital communications analyzer is a four-slot module

LISTED UNDER: Boards & Modules

Software Option Delivers a Forth/Back Frequency Sweep

August 28, 2007 9:38 am | Product Releases | Comments

Noise Com announces a software option for the GPS7500 Noise and Interference Generators that delivers both forward, reverse and a forth/back frequency sweep over the entire 40 MHz output bandwidth at any of the L1 and optionally L2 or L5 GPS test frequencies. The software can provide swept frequency signals at any of the output power levels from -126.5 dBm to +21 dBm.

LISTED UNDER: Boards & Modules

Data Acquisition Modules for Simultaneous Measurements

August 28, 2007 9:12 am | Product Releases | Comments

National Instruments introduces its PXI-4498 and PXI-4496 dynamic signal acquisition (DSA) modules that are designed for sound and vibration applications. They offer 16 simultaneous 24-bit analog inputs per module and IEPE constant current signal conditioning for precision measurements with microphones and accelerometers in high-channel-count systems such as noise mapping, beam-forming applications and structural vibration.

LISTED UNDER: Boards & Modules

Two-Port Interface Master Card

August 28, 2007 7:37 am | Product Releases | Comments

The eAutomation Group of Advantech introduces its PCI-1202U PCI interface card with two AMONet master ports that support the company’s AMAX line of motion and control products. It is a hybrid RS-485 based network similar to other proprietary fieldbus networks intended to offer high speed deterministic communication. Common CAT5 cable is the recommended medium, making it appropriate for distributed motion control applications.

LISTED UNDER: Boards & Modules

Position Tracking System Has Fraction-of-a-Millimeter Feedback

August 28, 2007 7:34 am | Product Releases | Comments

Pepperl+Fuchs added the WCS3B Read Head to its PosiTrack Position Tracking System. Designed to provide simplified installation and improved operational performance, this read head provides a 32 mm slot width, compared with the 25 mm slot width available from the existing WCS3A model. The result is increased reader/code rail misalignment tolerances of 20 percent on the horizontal axis and 40 percent on vertical axis.

LISTED UNDER: Boards & Modules

M-Module Offers Advanced Analog Output Functionality

August 24, 2007 6:39 am | Product Releases | Comments

MEN Micro Inc. released an M-Module featuring four grounded voltage or current channels that provide exceptional analog output functionality.  The four channels of the M37N, feature an acquisition time of <8.5 µs, can be individually adjusted as well as updated automatically and simultaneously. This makes it suitable for applications requiring high-speed data acquisition, desirable timing resolution and precise measurement found in automated test environments, process control systems

LISTED UNDER: Boards & Modules

Ultra Low Jitter Timing Modules for Synchronous Ethernet

August 7, 2007 5:11 am | Product Releases | Comments

Valpey Fisher Corporation introduced the VFJA432 and VFJA434 integrated timing modules for synchronizing Ethernet. The timing modules can synchronize an Ethernet physical layer to a telecom network timing reference while generating a 0.18 picosecond jitter Ethernet clock. The modules can synchronize to common telecom frequencies such as 8 KHz and 19.44 MHz from the backplane or common Ethernet frequencies such as 25MHz and 125 Mhz from the physical layer

LISTED UNDER: Boards & Modules

Tool for Network Infrastructure 2.0 Supports Intel Core Microarchitecture

August 6, 2007 7:42 am | Product Releases | Comments

VirtualLogix announced VLX for Network Infrastructure 2.0. This newest version of VLX for Network Infrastructure offers a host of new features and capabilities, including enhanced availability and increased OS and platform support, while using the latest hardware from Intel, including support for the Intel NetStructure MPCBL0050 Single Board Computer an AdvancedTCA (ATCA) blade server based on the Intel Core microarchitecture.

LISTED UNDER: Boards & Modules

ISE with Low Memory Requirements and New OS Support

August 6, 2007 7:38 am | Product Releases | Comments

Xilinx announced the latest release of its widely-used design solution. Improvements in the ISE 9.2i release reduce memory requirements by an average of 27 percent while providing expanded support for Microsoft Windows Vista, Microsoft Windows XP x64, and Red Hat Enterprise WS 5.0 32-bit and 64-bit operating systems. To simplify multi-rate DSP designs with a large number of clocks typically found in wireless and video applications, ISE 9.2i software features exceptional place and route and clock algorithms.

LISTED UNDER: Boards & Modules

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading