Advertisement

EVM touts exceptional processing and graphics capabilities for industrial apps

May 22, 2013 10:20 am | Texas Instruments | Product Releases | Comments

Texas Instruments Incorporated (TI) introduced its OMAP5432 processor-based evaluation module (EVM) for high-performance industrial applications. The OMAP5432 EVM is said to enable quick, easy evaluation and benchmarking for applications demanding high-performance processing and graphics at

LISTED UNDER: Development

Arduino-compatible boards tout prototyping-friendly 32-bit MCU packages

May 15, 2013 5:39 pm | Microchip Technology Inc. | Product Releases | Comments

Microchip Technology Inc. expanded its Arduino compatible chipKIT platform ecosystem, with new tools from Digilent, Inc., the Fair Use Building and Research (FUBAR) Labs, and Schmalz Haus LLC. These new tools are based on Microchip’s 32-bit PIC32 microcontrollers (MCUs) in prototyping-friendly

LISTED UNDER: Circuit Design Aids | Development

Embedded vision system allows remote switching of PoE status

May 15, 2013 10:57 am | Adlink Technology Inc. | Product Releases | Comments

ADLINK Technology announced the release of its new EOS-1220 GigE Vision-compliant embedded vision system, featuring 3rd generation Intel Core i7 quad-core processors, four independent PoE (power over Ethernet) ports, full compatibility with GigE Vision cameras and support for smart PoE APIs, allowing remote switching of PoE status.

LISTED UNDER: Microcomputer
Advertisement

Controller designed for aerospace, industrial, and laboratory applications

May 14, 2013 10:44 am | Highland Technology | Product Releases | Comments

Highland Technology announces the release of the V120 VME PCI Express Crate Controller for aerospace, industrial, and laboratory application. The V120 is a VME bus master crate controller, usable as a crate slot 0 arbiter or as a secondary controller. Each PCI Express cable driver board, in a PC backplane, can drive one or two V120s over standard, flexible PCI Express cable assemblies....

LISTED UNDER: Data Acquisition

Kit helps developers gain fast entry into the world of embedded ARM processors

May 10, 2013 11:25 am | Kontron | Product Releases | Comments

Kontron announced the ready-to-use SMARC Starterkit. The kit offers developers fast entry into the world of embedded ARM processors, which is now highly scalable owing to SMARC Computer-on-Modules. The kit comes in a sturdy transport case, has all the cables already connected and is

LISTED UNDER: Development

Starter Kit speeds up choosing and commissioning the optimum drive

May 10, 2013 11:06 am | Product Releases | Comments

With its new StarterKit, Nanotec Electronic is helping companies choosing and commission the optimum drive. Various motor settings can be tested, and different operating modes such as open loop and closed loop can be

LISTED UNDER: Development

Booster pack lets users jumpstart and explore sensor fusion applications

May 9, 2013 9:50 am | Texas Instruments | Product Releases | Comments

Texas Instruments announced the Sensor Hub BoosterPack for its Tiva C Series TM4C123G LaunchPad. This plug-in daughter card that allows ARM Cortex-M4 MCU developers create products with up to seven types of motion and environmental sensing capabilities. The board and software enables

LISTED UNDER: Development | Position | Pressure

Low Resistance Gold Plated Connector

May 1, 2013 3:47 pm | Fujipoly America | Products

Fujipoly’s Zebra® Gold Series 8000B is a high performance, low resistance connector that is capable of transferring both data and power between parallel components or circuit boards.This interconnect device is constructed from a low durometer silicone core that is covered with 133 parallel rows of flat, gold-plated wires per inch. This unique construction allows the connector to accommodate PCBs with pad center spacing down to 0.19mm. In addition, each 0.05mm x 0.10mm gold-plated element delivers a current carrying capacity of 500mA while exhibiting a typical electrical resistance of less than 25 milliohms on a 0.635mm wide contact pad.

LISTED UNDER: Computer | Flexible | Multi-layer
Advertisement

Roboteq backs Raspberry PI-based Robot Navigation Computer project on Kickstarter

May 1, 2013 2:53 pm | Roboteq, Inc | Product Releases | Comments

Roboteq is collaborating on a kickstarter project named RIO (for Raspberry IO) and aimed at creating an intelligent I/O card that stacks over the $35 Raspberry PI Linux Single Board computer. The RIO card includes a rich set of I/O and connectivity features.

LISTED UNDER: Computer

Smart protocol converter translates avionics messages in real-time

May 1, 2013 11:47 am | Product Releases | Comments

Data Device Corporation (DDC) introduced the AceXtreme Bridge Device to translate avionics messages in real-time between MIL-STD-1553, ARINC 429, and Ethernet in any direction, without a host computer. With an onboard Intel Atom processor, two Ethernet channels, two

LISTED UNDER: Data Acquisition | Embedded

SoC development kit features ARM DS-5 Altera Edition toolkit

May 1, 2013 11:32 am | Altera | Product Releases | Comments

Altera Corporation announced the availability of its Cyclone V SoC Development Kit. Developed in collaboration with ARM, this kit features the recently announced ARM Development Studio 5 (DS-5) Altera Edition Toolkit software, an FPGA-adaptive debugging tool that

LISTED UNDER: Development

USB thermocouple and vibration DAQ modules aimed at academic users

April 29, 2013 10:50 am | Data Translation, Inc. | Product Releases | Comments

Data Translation announced two sensor specific, USB-powered modules with application software for the growing educational market. These new devices allow lab and field testing for experimentation, sound, vibration, and temperature analysis.

LISTED UNDER: Data Acquisition

Single board computer simplifies instrument control

April 24, 2013 3:24 pm | Mosaic Industries | Product Releases | Comments

The PDQ Lite is a low cost single board computer and development board that hosts the Freescale HCS12/9S12 MCU and an embedded RTOS. This GNU C-programmable instrument controller is well suited for data acquisition and control, PWM drive, I2C sensor interfacing, laboratory automation, scientific instruments, SCADA, instrumentation and automation.

LISTED UNDER: Computer | Data Acquisition

VPX processor blade provides up to 8GB DDR3-1333/1600 dual channel ECC memory

April 24, 2013 2:17 pm | Product Releases | Comments

ADLINK Technology announced its flagship VPX product line, the VPX3000 Series rugged 3U VPX processor blade. The VPX3000 Series is ideal for system integrators who have a need for an advanced VPX board with VPX REDI and OpenVPX compliance in order to deploy high performance military and aerospace applications requiring quick time-to-market.

LISTED UNDER: Computer

Development platform for the Kinetis K20 MCU is Arduino compatible

April 22, 2013 9:50 am | Product Releases | Comments

Premier Farnell announced the global availability of Freescale Semiconductor’s newest Freedom Development Platform for evaluating Kinetis K20 MCUs at element14. The new FRDM-K20D50M Development Platform is form-factor compatible with the Arduino R3 pin layout, providing

LISTED UNDER: Development

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading