Advertisement

Embedded vision starter kit touts updated PVP programmer, new lens adapter

August 5, 2013 6:40 pm | Analog Devices, Inc. | Product Releases | Comments

Avnet Electronics Marketing’s development kit for the Analog Devices dual-core Blackfin BF609 processor offers an updated pipelined vision processor (PVP) programmer and a new lens adapter. The new PVP Programmer add-in to the Blackfin development tool, CrossCore Embedded Studio, enables a

LISTED UNDER: Development | Multicore
Advertisement

Motion cards combine four axis motion card with high performance on-card amplifiers

July 31, 2013 10:07 am | Performance Motion Devices | Product Releases | Comments

Performance Motion Devices, Inc. announces a new family of Prodigy motion cards that combines a full featured four axis motion card with high performance on-card amplifiers. The Prodigy®/CME Machine Controller Card utilizes PMD's ATLAS® Digital Amplifiers to eliminate the need for external amplifiers, allowing new levels of convenience, integration, and cost savings for applications in life sciences equipment, scientific automation, robotics, and general purpose automation.

LISTED UNDER: Computer

PCI Express Mini Card uses GNSS receiver to handle data transmissions

July 29, 2013 3:21 pm | Product Releases | Comments

MEN Micro Inc. has released the PX1, a new PCI Express Mini Card that uses a GNSS receiver to handle data transmissions from both GPS and GLONASS systems. The board, which supports both active and passive antennas via a U.FL connector, provides superior satellite-based communication worldwide

LISTED UNDER: Computer

Signal acquisition module ideal for precision microphone and accelerometer measurement

July 17, 2013 4:23 pm | Adlink Technology Inc. | Product Releases | Comments

ADLINK Technology announces the release of its new four-channel USB 2.0 dynamic signal acquisition module, the USB-2405. A built-in IEPE excitation current source provides 2mA on each AI channel, and BNC connectors enable the USB-2405 to provide high accuracy and excellent dynamic performance....

LISTED UNDER: Data Acquisition

ADC board with 8GB deep RAM achieves >70dB dynamic range

July 16, 2013 9:55 am | Ultraview Corporation | Product Releases | Comments

Ultraview Corporation has announced an ultra-fast PCIe data acquisition board allowing uninterrupted acquisition of two concurrent 2 GSPS 12-bit A/D channels or a single channel at up to 4 GSPS. The AD12-2000x2's unique combination of proprietary low-noise, low-distortion DC-2 GHz front end...

LISTED UNDER: Data Acquisition

6U FPGA card with trio of Xilinx Virtex-7 FPGAs touts desirable processing density and I/O flexibility

July 10, 2013 8:38 am | Curtiss-Wright Controls | Product Releases | Comments

Curtiss-Wright Controls Defense Solutions has announced its CHAMP-FX4 COTS 6U FPGA engine. This rugged, high-performance OpenVPX (VITA 65) board is said to be the industry’s first COTS 6U FPGA engine to feature triple on-board Xilinx Virtex-7 devices in a single chassis slot.

LISTED UNDER: Computer | Embedded

USB Latching 8 Amp relay Module Model RSB2084

June 26, 2013 9:26 pm | J-Works, Inc. | Products

RSB2084 series of 8 Amp Latching SPST relay modules controlled over the USB. The relays are rated at 8A @ 250VAC Wire connection to the relay module are made with on-board screw type terminals and controlled by USB commands. A "latching relay' has two relaxed states (bistable). These relays are called 'impulse', "keep" or "stay" types. When the power is switched off the relays, the relay remains in its last state. The relay retains the last state during any power outages, and will only switch when command to by the host PC. The user communicates with the module from any programming or test language that supports USB communications as shown in provided sample applications.

LISTED UNDER: Computer | Embedded | Industrial

Wi-Fi modules enable streamlined data accessibility

June 26, 2013 4:18 pm | Radicom Research, Inc. | Product Releases | Comments

Radicom Research announced the release of their RW8200 Embedded Serial to Wi-Fi Modules. It integrates a M3 Cortex host processor, Broadcom’s BCM44362 Wireless Internet Connectivity for Embedded Devices (WICED) and an embedded processor.

LISTED UNDER: Microcomputer

Demonstration board offers fully functional buck power conversion demonstration circuit

June 20, 2013 11:47 am | Efficient Power Conversion | Product Releases | Comments

Efficient Power Conversion Corporation (EPC) introduces the EPC9107, a fully functional buck power conversion demonstration circuit.  This board is a 9 V-28 V input to 3.3 V, 15 A maximum output current, 1MHz buck converter.  It uses the EPC2015 eGaN FET in conjunction with the LM5113 100V half-bridge gate driver from Texas Instruments. The EPC9107 demonstrates the reduced size and performance capabilities of high switching frequency eGaN FETs when coupled with this dedicated eGaN driver.

LISTED UNDER: Circuit Design Aids

Module designed for high-speed applications

June 17, 2013 12:53 pm | Product Releases | Comments

trans data elektronik presents the latest generation of the tBL-tde Basic Link RJ45 module. The tBL-RJ45 module, available in two different versions, offers the optimal solution for every network environment. Thanks to slim tBL cable termination blocks, pre-assembling is possible.

LISTED UNDER: Terminal

PIC32 adapter board aims to simplify graphical display prototyping

June 13, 2013 2:17 pm | Newhaven Display International | Product Releases | Comments

Newhaven Display and Digi-Key have developed a new PIC32 adapter board, the NHD-3.5-320240MF-PIC EVAL BOARD. This display adapter provides the designer with a color resistive touch LCD (NHD-3.5-320240MF-ATXL#-T-1) and hardware interface for

LISTED UNDER: Development

Modules allow an up to 15% reduction in power consumption

June 7, 2013 1:39 pm | Product Releases | Comments

Swissbit announces new members of its INDUSTRIAL family of DDR3 SODIMMs compatible with the JEDEC DDR3L standard running at 1.35V. DDR3L will allow an up to 15% reduction in power consumption over DDR3. With the introduction of 3x and 2x nm DRAM technology, the modules are able to run at lower external supply voltage than the standard 1.50V.

LISTED UNDER: Terminal

Touchscreen device/open-source expansion board offers high degree of customization

June 5, 2013 11:29 am | Product Releases | Comments

Gumstix announced the Alto35, an expansion board built entirely with Gumstix’ Geppetto custom design platform. The Alto35 replaces Gumstix’ Palo35 Overo-series expansion board, offering all of the same off-the-shelf features and the added benefit of customizability via Geppetto.

LISTED UNDER: Circuit Design Aids

Compact datalogger includes wireless connectivity based on GSM/GPRS module

June 5, 2013 10:34 am | Telit Wireless Solutions | Product Releases | Comments

Telit Wireless Solutions and Danlaw Incorporated announced that Danlaw’s DL750 includes Telit’s ultra-compact GSM/GPRS cellular module, the GE865-QUAD. The product is a self-contained consumer installable data collection device. Danlaw and Telit who cooperated in a number of products before, are

LISTED UNDER: Data Acquisition | Data Loggers

USB design board offers industry compatible stamp footprint for new product designs

June 4, 2013 2:12 pm | Zilog | Product Releases | Comments

Zilog introduced a new reference design, the Mini-Z USB Design Board.  The board incorporates a USB host and peripheral functionality with the company’s portfolio of Mini-Z modules. This hardware design uses a Max3421E USB transceiver to provide an interface to USB communications with supporting

LISTED UNDER: Circuit Design Aids | Development

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading