Advertisement

450-watt, baseplate-cooled half-brick DC-DC converter achieves 93.5% efficiency

November 30, 2012 10:42 am | Murata Power Solutions Inc. | Product Releases | Comments

The Murata Power Solutions PAH series of high efficiency, medium-power DC DC converters are capable of delivering up to 450 Watt output. These compact modules, measuring just 58 x 61 x 12.7 mm, comply with the DOSA half-brick footprint. Ideally suited for power amplifiers, wireless networks, and other telecom applications....

LISTED UNDER: Boards | Power Supplies | DC to DC
Advertisement

PC/104 powered device power supply module designed for industrial power over ethernet applications

November 29, 2012 3:58 pm | Winsystems | Product Releases | Comments

WinSystems introduces the PPM-PS397-POE-1, a Power over Ethernet Powered Device (PoE-PD) DC/DC supply for a PC/104-Plus compatible computer board stack.  Configured as either an endpoint or midspan device, it is designed to extract power from a conventional twisted pair Category 5 Ethernet cable

LISTED UNDER: Boards & Modules

12bit ADC operates at up to 1.5GSps

November 29, 2012 11:39 am | Product Releases | Comments

Building on the performance of its true-single-core high bandwidth family of ADCs with direct RF sampling, e2v has now announced the launch of a demonstration kit for its 12 bit 1.5GSps analogue to digital converter. This Demonstration Kit (DK) allows for faster ADC performance evaluation.

LISTED UNDER: Boards & Modules | Boards

MEMS variable capacitive accelerometers includes eight-pin connector

November 28, 2012 11:28 am | Product Releases | Comments

Silicon Designs has announced the global market launch of the model 2466 series. The 2466 series is a family of low-cost industrial grade triaxial universal MEMS capacitive accelerometer modules with eight-pin connector, designed to provide high-precision shock, vibration and acceleration measurements in three orthogonal directions across a broad range of applications.

LISTED UNDER: Boards & Modules | Packaging & Interconnects | Sensors & Actuators

Development board with projected-capacitive touch facilitates cost-effective multitouch displays

November 27, 2012 3:17 pm | Microchip Technology Inc. | Product Releases | Comments

Microchip Technology announced the PIC32 GUI Development Board With Projected Capacitive Touch. This tool makes it easy for designers to add the combination of multitouch projected-capacitive interfaces, and high-quality 16-bit color graphics to WQVGA displays in any application.

LISTED UNDER: Boards & Modules

Highly-integrated front end module intended for smart metering/smart energy and ISM band applications

November 26, 2012 11:40 am | Product Releases | Comments

RF Micro Devices announced the availability of the RFFM6903 front end module (FEM). RFMD's highly-integrated RFFM6903 FEM meets or exceeds the system requirements for AMI/AMR smart meter applications operating in the 868MHz–960MHz frequency band.

LISTED UNDER: Boards & Modules

Modules reduce instrument jitter to <100 femtoseconds

November 21, 2012 11:22 am | Tektronix | Product Releases | Comments

Tektronix announced a new Phase Reference Module, the 82A04B, for the DSA8300 oscilloscope that when combined with new electrical sampling modules provide instrument jitter of  <100 femtoseconds, typical. This represents the lowest instrument jitter of any multi-channel oscilloscope on the market, sampling or real-time....

LISTED UNDER: Boards & Modules | Test & Measurement

Silicon carbide high-frequency power module rated at 100A current handling and 1200V blocking

November 19, 2012 3:32 pm | Product Releases | Comments

Cree continues to showcase the superior performance and reliability of its silicon carbide (SiC) power technology with the introduction of the first commercially available all-SiC Cree power module.  The new high frequency module, rated at 100A current handling and 1200V blocking....

LISTED UNDER: Boards & Modules

MIL-STD-1553 test and simulation tool includes amplitude range of 0V to 20.5V

November 19, 2012 10:27 am | Product Releases | Comments

Data Device Corporation (DDC) adds variable voltage programmability to the BU-67210F/I/T one to four channel MIL-STD-1553 AceXtreme PMC, PCI, and cPCI/PXI Card family to create a feature-rich and highly dynamic test, simulation, and verification tool.

LISTED UNDER: Boards & Modules | Test & Measurement

LED drivers suit large industrial displays

November 6, 2012 1:44 pm | Endicott Research Group | Product Releases | Comments

Endicott Research Group (ERG) has introduced its Large Display Solutions: LED drivers and rails specifically designed for LCDs in the 19” to 27” diagonal range.  The series includes the SFDZ, SFDQ and SFDT driver modules. The SFDZ Series driver provides

LISTED UNDER: Boards & Modules | Optoelectronics & Displays

Liquid crystal displays intended for rackmount applications

November 5, 2012 2:33 pm | Product Releases | Comments

Microtips Technology offers a few different sized full color TFT LCD modules specially designed to fit within products conforming to the 1U, 2U & 3U standard dimensions and can withstand high operating temperature range. Some of the key features of the 1.77” (1U) version are a 160 x 128 resolution, onboard controller IC...

LISTED UNDER: Boards & Modules | ICs | Optoelectronics & Displays

Encoders provide cost-effective solution for small applications

November 5, 2012 10:19 am | Product Releases | Comments

AutomationDirect has added Koyo inch-size light and medium-duty encoders to its line of positioning and motion control products. These stainless steel solid-shaft encoders provide a cost-effective solution for small applications. The TRDA-2E series light-duty encoders have a 0.25-inch diameter stainless steel solid shaft

LISTED UNDER: Boards & Modules

16-bit 4-channel 250MSPS A/D board designed for demanding applications

November 1, 2012 1:02 pm | Product Releases | Comments

Ultraview Corporation announces a 16-bit 4-channel 250MSPS A/D board for very demanding uses, where repetitive signals on multiple time-aligned channels need to be observed with high SNR, such as NMR, RADAR, ultrasound, time-of-flight imaging, spectroscopy, communications systems and antenna testing and other critical applications. 

LISTED UNDER: Boards & Modules

Module delivers 100Mbps-down and 50Mbps-up data rates on LTE networks

October 25, 2012 1:25 pm | Product Releases | Comments

Telit Wireless Solutions announced the introduction of the LE920 LTE module for European and North American OEM automotive and aftermarket segments. The new 920 form factor measures 34x40x2.8mm on a 198-pad LGA automotive-grade package.

LISTED UNDER: Boards & Modules

Controllers with integrated HMIs equipped for hazardous locations

October 23, 2012 4:05 pm | Product Releases | Comments

Globally known for their uniquely designed Programmable Logic Controllers with integrated HMIs, Unitronics is proud to announce that even more of their products are now suitable for hazardous locations with UL Class I, Division 2 ratings. Even more equipped for industries such as oil and petrochemical, some of the newly rated products include

LISTED UNDER: Boards & Modules | Computer Peripherals & Networking Devices

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading