Advertisement

Embedded I/O modules include MiniPCIe Interface for fast I/O extension

April 28, 2014 9:35 am | Advantech | Product Releases | Comments

Advantech (Irvine, CA) announces a series of new Embedded I/O Modules for Touch, CANBus, Parallel, Serial, GigaLAN, SATA III, and USB 3.0 using standard full-size MiniPCIe interface. Using this standard design, customers can simply extend extra interface ports without board modification....

LISTED UNDER: Computer
Advertisement

Industrial-grade embedded computers feature Intel Multi-Core Atom E3800 processors

April 2, 2014 2:10 am | Winsystems | Product Releases | Comments

WinSystems (Arlington, TX) introduced a line of multi-core Intel Atom E3800 embedded computers designed to operate from -40°C to +85°C. The SBC35-CC405 Series of embedded PCs include onboard USB, Gigabit Ethernet, serial ports, and...

LISTED UNDER: Computer | Embedded

EBX computer board family adds a dual-core Intel Core i3 and a Celeron-based products

April 2, 2014 1:55 am | Versalogic Corp. | Product Releases | Comments

VersaLogic Corp. (Tualatin, OR) announced the release of two new models in its “Copperhead” line. The new offerings include a dual-core Intel Core i3 product, and a Celeron-based product. The models are positioned to provide both lower cost...

LISTED UNDER: Computer | Embedded

Expansion boards enable computer control and monitoring applications

March 14, 2014 12:24 pm | Sealevel Systems, Inc. | Product Releases | Comments

Sealevel Systems, Inc. (Liberty, SC) announced the SeaRAQ family of I/O expansion boards designed for Relio R3 rackmount industrial computers. The boards interface to a variety of real-world I/O, and all boards are isolated to

LISTED UNDER: Computer | Terminal

DSB3232 USB 32 channel Digital IO with mutiple voltage support.

March 4, 2014 1:23 pm | J-Works, Inc. | Products

The DSB3232 USB digital IO lines can be configured for input or output at the bit level supporting various logic family voltages. Those voltages included 1.8V, 2.5V 3.3V and 5V. Technicians wire the digital IO module using the on-board screw terminals. With the expanding number of logic level interface voltages, one of the challenges facing connecting devices to the USB bus is matching the required voltage levels and the DSB3232 meets those requirements.

LISTED UNDER: Computer | Microcomputer | Embedded

Embedded graphics module features CoreAVI software drivers

February 25, 2014 12:37 pm | Curtiss-Wright Controls | Product Releases | Comments

Curtiss-Wright Corporation (Ashburn, VA) announced that its Defense Solutions division has begun shipping its highest performance embedded graphics module, the new VPX3-716 3U OpenVPX multi-head graphics display card, the first based on the next generation AMD Embedded Radeon E8860 “Adelaar” GPU.

LISTED UNDER: Data Acquisition

Fine-pitch wire-to-board solutions ideal for restricted-space applications

February 18, 2014 2:15 pm | Product Releases | Comments

GradConn (Boca Raton, FL) has announced the release of a new fine-pitch wire-to-board range of solutions. Suitable for any application where space is at a premium such as Laptop PCs, tablets, video cameras and portable GPS systems the new .031” and .039” pitch wire to board range offer tiny PCB footprints and low profile mounted heights.

LISTED UNDER: Data Acquisition

Single board computer utilizes 4GB of eMMC Flash

February 18, 2014 9:52 am | Product Releases | Comments

EMAC (Carbondale, IL) has created the iPAC-9X25. Made in the USA, this industrial-strength ARM embedded single board computer is based on Atmel AT91SAM9X25 Processor.  It has an industrial temperature range of -40C to +85C and utilizes 4GB of eMMC Flash, 16MB of Serial Data Flash (for boot), and 128 MB of DDR RAM.

LISTED UNDER: Computer

Development platform for NFC/RFID tags promises to jumpstart IoT designs

February 13, 2014 11:51 am | Stmicroelectronics | Product Releases | Comments

STMicroelectronics (Geneva) announced an easy-access development platform for its M24SR dynamic NFC tags that are now entering volume production in all memory densities and package options. Aiming to accelerating the design of IoT applications, the M24SR Discovery Kit contains

LISTED UNDER: Development

Plug-and-play position detection prototype kit aims to speed time to market for instrument development

February 12, 2014 2:48 pm | Calsensors | Product Releases | Comments

Cal Sensors (Santa Rosa, CA) launched a new Position Detection Prototype Kit, a plug-and-play tool designed to accelerate prototyping and product development for position or flash detection instruments. Applying PbS and PbSe detector technologies, the kit allows engineers to

LISTED UNDER: Development

JSB470 USB 24 Channel Parallel Digital IO Module

February 7, 2014 3:20 pm | J-Works, Inc. | Products

JSB470 series of digital input and output modules controlled over the USB. Engineers control the channel direction and values from any host computer. Each digital IO line is 5V tolerant and provides a minimum 2.5V output at 15ma, and sink 24ma. A technician wires the digital IO module to their hardware via a standard 25 pin sub "D" connector. The user communicates with the module from any programming or test language that supports USB communications as shown in provided sample applications. Perfect for a variety of control, monitor and test & measurement applications

LISTED UNDER: Data Acquisition | Industrial | Instrument Control

Serial adapter designed for Android devices

February 7, 2014 1:08 pm | by ECN Staff | ACCES I/O Products, Inc. | Product Releases | Comments

ACCES I/O Products (San Diego, CA) announces the release of a new USB serial interface board—the ANDROID-232. Users can now control legacy RS-232 devices directly from modern Android devices. The ANDROID-232 uses the Android Open Accessory protocol....

LISTED UNDER: Data Acquisition

ANDROID-232 RS-232 Serial Adapter for Android Devices

February 6, 2014 8:23 pm | ACCES I/O Products, Inc. | Products

ACCES I/O Products, Inc. is pleased to announce the release of a new USB serial interface board - the ANDROID-232. Users can now control legacy RS-232 devices directly from modern Android devices. The ANDROID-232 uses the Android Open Accessory protocol to convince an Android device that its onboard USB port (normally limited to USB "slave" or "OTG" modes) is actually an RS-232 port. This two way data port allows external hardware to control the Android unit or for the Android unit to control external hardware. Onboard circuitry will provide power to charge your Android device while connected. Multiple status and fault LEDs complete the package, and allow simple and convenient confirmation of operational state.

LISTED UNDER: Computer | Data Acquisition | Embedded

EPROM/wafer erasing system erases programmed memory in 5.4 minutes

February 5, 2014 2:46 pm | Spectroline | Product Releases | Comments

The Spectroline (Westbury, New York) PC-2200A UV EPROM/Wafer Erasing System is a portable, rugged unit that provides high UV intensity and irradiance uniformity to ensure complete erasure of programmed memory from every EPROM chip or wafer in as little as 5.4 minutes.

LISTED UNDER: Computer

Interface cards support the CAN and CAN FD standards

February 5, 2014 10:23 am | Product Releases | Comments

With the new CAN-IB 500 and the CAN-IB 600, HMS (Chicago, IL) offers two interface cards (passive/active) that support not only CAN but also the new CAN FD standard. Both cards are for the PCI Express standard.

LISTED UNDER: Microcomputer

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading