Advertisement
Power

Amplifier performs 600 V/m radar pulse radiated immunity testing

October 9, 2014 3:13 pm | Ametek | Product Releases | Comments

Instruments for Industry (IFI), a unit of AMETEK Compliance Test Solutions (Ronkonkoma, NY), now offers a dual-mode, solid-state amplifier that combines continuous (CW) and pulse (P) operating modes.  The new S31-500-900P amplifier has been optimized....

LISTED UNDER: Power Sources & Signal Conditioning Devices | Amplifiers | Power

Power amplifiers designed for 802.11a/n/ac WLAN applications

October 6, 2014 12:27 pm | Rfmw Ltd | Product Releases | Comments

RFMW, Ltd. (San Jose, CA) announces design and sales support for a pair of 5GHz power amplifiers designed for 802.11a/n/ac WLAN applications. TriQuint’s TQP5523 and TQP5525 are fully integrated modules with internal matching on both input ...

LISTED UNDER: Power Sources & Signal Conditioning Devices | Amplifiers | Power

Power-efficient drivers provide quiescent current as low as 495µA

September 23, 2014 9:45 am | Analog Devices, Inc. | Product Releases | Comments

Analog Devices, Inc. (Norwood, MA) introduced a family of low-power rail-to-rail amplifiers for high-speed data acquisition systems that require exceptional accuracy, precision and power efficiency. For system designers who are looking to achieve ...

LISTED UNDER: Power Sources & Signal Conditioning Devices | Amplifiers | Power
Advertisement

6 GHz to 16 GHz driver amplifier delivers 21 dB of gain

September 19, 2014 11:17 am | Product Releases | Comments

Custom MMIC (Westford, MA) announced the addition of the CMD158C4, a new 6 to 16 GHz driver amplifier, to their growing standard product line. The CMD158C4 delivers 21 dB of gain across its bandwidth, while providing ...

LISTED UNDER: Microwave | Power | RF

GaN power amp delivers 16 dB of flat gain

August 18, 2014 4:52 pm | Product Releases | Comments

Custom MMIC (Westford, MA) announces the addition of the CMD216, a new 14-18 GHz GaN power amplifier in die form, to their expanding product line. The CMD216 delivers 16 dB of flat gain across the entire 14 to 18 GHz bandwidth, an output 1 dB compression point of +37 dBm ...

LISTED UNDER: Power Sources & Signal Conditioning Devices | Amplifiers | Power

Broadband limiting amplifiers target electronic warfare, broadband communications

April 29, 2014 12:08 pm | Product Releases | Comments

Pasternack Enterprises (Irvine, CA) unveiled new wide dynamic range broadband limiting amplifiers commonly used in electronic warfare, microwave receivers and broadband communications systems. These coaxial limiting amplifiers cover...

LISTED UNDER: Current | Power

10-A, 200-V power amp includes over current protection, over temperature shutdown

April 21, 2014 7:00 pm | Product Releases | Comments

Apex Microtechnology’s (Tucson, AZ) open frame power operational amplifier MP118FD – which mirrors the high current and high voltage performance features of the company’s MP108FD -- integrates several layers of onboard circuit protection safe guards. In addition to

LISTED UNDER: Power

Power amplifiers feature gain flatness from 0.50 dB to 1.0 dB

March 31, 2014 9:28 am | Product Releases | Comments

Pasternack Enterprises (Irvine, CA) introduces a new family of coaxial X band high-gain power amplifiers. These RF amplifiers are typically used as driver amplifiers or high-power output amplifiers in a wide variety of commercial, industrial, and military applications....

LISTED UNDER: Power
Advertisement

RF Amplifiers & Oscillator

March 26, 2014 4:31 pm | Pro-Comm, Inc. | Products

Pro-Comm provides custom fabrication of RF Microwave amplifiers, oscillators and systems within the 400-3000 MHz bandwidth at powers ranging from 100 watts to 50,000 watts peak

LISTED UNDER: Power | Pulse | RF

Power amplifier operates in the 1805 MHz to 1880 MHz frequency band

January 30, 2014 1:33 pm | Anadigics Inc. | Product Releases | Comments

ANADIGICS (Warren, N.J.) introduced the AWB7222 power amplifier (PA), optimized for WCDMA, HSPA, and LTE small-cell applications. The new AWB7222 operates in the 1805 MHz to 1880 MHz frequency band, delivering an industry-leading combination of output power, linearity, power-added efficiency and thermal characteristics.

LISTED UNDER: Power

Power amplifiers cover the frequency range of 2.7 to 3.7GHz

January 14, 2014 4:29 pm | Rfmw Ltd | Product Releases | Comments

RFMW, Ltd. announces design and sales support for two S-band power amplifiers from TriQuint. The TGA2583 and TGA2585 cover the frequency range of 2.7 to 3.7GHz with 10 and 18 watts of saturated output power respectively. Both TriQuint devices offer power added efficiency of 54% with a small signal gain of 33dB.

LISTED UNDER: Power

1 Watt power amplifier operates from 20 to 600 MHz

December 23, 2013 3:14 pm | Richardson RFPD, Inc. | Product Releases | Comments

Richardson RFPD today announces immediate availability and full design support capabilities for a new 1 Watt, wideband, N-connectorized power amplifier from Wavelex. The WPA0006N offers wide frequency band operation, from 20 MHz to 600 MHz, with 50 Ohm impedance, and features 30 dBm P1dB....

LISTED UNDER: Power

Solid-state power amplifiers designed for a wide range of X-Band frequency applications

December 23, 2013 2:46 pm | Product Releases | Comments

CTT announces a new family of compact, GaN-based solid-state power amplifiers (SSPAs) operating in the 7.0 to 11.0 GHz frequency range for a wide variety of commercial, industrial and military microwave applications. CTT’s latest compact SSPA designs offer as much as 100 Watts of Output Power in a compact package.

LISTED UNDER: Power

Hybrid amplifiers provide up to +61 dBmV output power and 26 dB gain

December 13, 2013 10:00 am | Richardson RFPD, Inc. | Product Releases | Comments

Richardson RFPD, Inc. today announces immediate availability and full design support capabilities for two new hybrid amplifiers for CATV applications from TriQuint. The TAT8884HO GaAs power doubler amplifier operates from 50 to 1000 MHz and features high linearity and gain.

LISTED UNDER: Power

Active harmonic filter improves efficiency while reducing harmonic pollution

December 5, 2013 2:10 pm | Schaefer Power Inc | Product Releases | Comments

Schaefer is proud to introduce their new PB Series three-wire and four-wire active harmonic filter modular systems that are designed to meet IEEE-519. The Power Balance (PB) family is scalable and offers a practical solution for improving power quality for tower buildings....

LISTED UNDER: Instrumentation | Power

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading