Sixteenth-brick 30W DC/DC converter targets embedded datacom applications
Murata Power Solutions  has introduced its ULS series of open frame, PCB board mount 30 Watt isolated DC/DC converters to the market.
With a 2:1 input voltage range of 36 – 75 VDC (48 VDC nominal), these sixteenth-brick DOSA compatible converters measuring just 33.27 x 23.11 x 8.13 mm are suitable for a wide range of datacom, telecom and industrial applications.
The ULS series comprises two models offering either a 12 or 15 VDC output. The ULS-12/2.5-D48 12 VDC output model can provide up to 2.5 A output and is suitable for use in regulated intermediate bus applications. The 15 VDC model provides up to 2 A. The output may be trimmed within +10% to -20% of nominal Vout allowing the user to compensate for voltage losses. The series offers tight line and load regulation of ± 0.125% providing an extremely stable output without the need for any additional external components. An On/Off control input provides the choice of configuring for either negative or positive polarity. No minimum load is required.
The series is rated at 2250 VDC input to output isolation ensuring that the end-application is protected from spikes, transients or other noise on the input. The converters are certified to UL/EN/IEC 60950-1 2nd edition safety approvals for IT and commercial equipment. Operating temperature range is from -40 to +85 degrees C.