15 Watt DIP24 DC-DC Converters have either 2:1 or 4:1 input ranges

Thu, 06/07/2012 - 10:25am
ECN Europe

XP Power has added two new families to its line-up of ultra-compact metal cased 15 Watt DC-DC converters. Available in an industry standard 24 pin DIP measuring just 31.75 x 20.32 x 10.16 mm (1.25 x 0.8 x 0.4 inches), the JCG15 and JTF15 series offer a power density of up to 37.5 Watts per cubic inch with an efficiency of up to 91%. Their size conserves board space, and their highly efficient design results in less wasted heat, assisting in the thermal management of the end system, says XP.

Providing the popular nominal inputs of + 12, + 24 or +48 VDC, the JCG15 series accommodates wide 2:1 input ranges of 9 – 18 VDC, 18 – 36 VDC and 36 – 75 VDC, with the JTF15 accepting ultra wide 4:1 inputs of 9 – 36 VDC and 18 – 75 VDC. Both single and dual output models are available. Single outputs are + 3.3, + 5.1, + 12 or + 15 VDC and duals are ± 5, ± 12 or ± 15 VDC.

The converters have an input to output and input/output to case isolation of 1,600 VDC. A remote on/off signal control is standard across the range and can be used to control the output rails or to sequence start-up procedures. All units feature overvoltage and continuous short circuit protection.

These highly efficient DC-DC converters operate from – 40 degrees C to + 100 degrees C for the JCG series and + 105 degrees C for the JTF series.

The JTF and JCG series suit a wide variety of mobile, portable and wireless applications.



Share this Story

You may login with either your assigned username or your e-mail address.
The password field is case sensitive.