Linear Technology Corporation introduces the LTM4627, a 15A DC/DC uModule regulator with onboard inductors, MOSFETs, and supporting components in a 2.6 g, 15 x 15 mm LGA (land grid array) package. Circuit design enhancements lower gate capacitance MOSFETs and stronger MOSFET drivers enable the LTM4627 to operate at approximately 7% higher efficiency or to deliver up to 15 A load current in the same board area and junction temperature as the 10 A DC/DC uModule regulator. (Comparison conditions: 12 Vin, 1.2 Vout, 10 A compared to the LTM4600 10 A uModule regulator. The LTM4600 is offered in 15 x 15 x 2.82 mm and LTM4627 in 15 x 15 x 4.32 mm LGA). The LTM4627 can convert input supplies ranging from 4.5 to 20 V to output voltages from 0.6 to 5 V, regulating the output with only +/-1.5% total DC output error maximum. Multiple LTM4627 devices can be paralleled for current sharing up to 60A. Applications include medical imaging systems.The LTM4627 has an onboard differential remote sense amplifier to precisely regulate very low voltage, high current loads such as 1.0 V or sub-1 V core voltages of FPGAs and ASICs. Remote sensing corrects voltage errors caused by the impedance of PCB traces when large current flows to the load. Output voltage tracking and soft-start features allow controlled power up and power down of a complex board with multiple power rails. The device's PLL (phase-locked loop) function permits users to synchronize the LTM4627 to a clock frequency from 250 to 780kHz, avoiding a specific frequency or frequency range that may interfere with sensitive components.
Regulator Delivers 50% More Power Without Sacrificing Board Area
Mon, 09/20/2010 - 11:21am